LM358AD vs LM258AD Perbandingan
Perbandingan bersamaan detil LM358AD dari STMicroelectronics dan LM258AD dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
STMicroelectronics
LM358AD - Dual Low Power Op-Amp, 1.1MHz, SOIC-8 | STMicroelectronics
LM358AD ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LM358AD | LM258AD |
|---|---|---|
| Merek | STMicroelectronics | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | General Purpose, Low Power | — |
| Number of Channels | 2 (Dual) | — |
| Gain-Bandwidth Product (GBP) | 1.1 MHz | — |
| Slew Rate | 0.6 V/µs | [DATA_NEEDED: slew rate] |
| Supply Voltage Range (Single) | 3 V to 30 V | — |
| Supply Voltage Range (Dual) | ±1.5 V to ±16 V | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | 45 nA (typical) | 20 nA |
| Quiescent Current (per amplifier) | 0.7 mA (typical) | — |
| Input Common-Mode Range | 0 V to VCC−1.5 V | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | [DATA_NEEDED: output swing to rail] | — |
| Rentang Suhu Kerja | 0 °C to +70 °C | -25°C to 85°C |
| Paket | 8-pin SOIC | 8-pin SOIC |
| Tipe Mounting | Surface Mount | Surface mount |
| ESD Protection | Yes (HBM, on inputs) | — |
| Internal Frequency Compensation | Yes | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Dual operational amplifier |
| Number of Amplifiers | — | 2 circuits |
| Maximum Supply Voltage | — | 30 V |
| Gain-Bandwidth Product | — | 700 kHz |
| Unity-Gain Bandwidth | — | 1.1 MHz |
| DC Voltage Gain | — | 100 dB |
| Supply Current per Amplifier | — | 500 uA |
| Compensation | — | Internally frequency compensated |
| Supply Configuration | — | Single supply |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Output Current | — | [DATA_NEEDED: output current] |
| Short-Circuit Protection | — | [DATA_NEEDED: short-circuit protection status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |