LM393BIDR vs LM393DRG3 Perbandingan
Perbandingan bersamaan detil LM393BIDR dari Texas Instruments dan LM393DRG3 dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | LM393BIDR | LM393DRG3 |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | Dual differential general-purpose comparator | Differential |
| Number of Channels | 2 channels | 2 channels |
| Tipe Output | Open-collector | Open-collector |
| Supply Voltage Range | [DATA_NEEDED: operating supply voltage range] | — |
| Maximum Rated Supply Voltage | 38 V | — |
| Differential Input Voltage Range | -38 V to +38 V | Equal to the maximum-rated supply voltage |
| Common-Mode Input Range | Includes ground | Includes ground |
| Maximum Input Offset Voltage | 2.5 mV | — |
| Typical Low Input Offset Voltage | 0.37 mV | — |
| Input Bias Current | 3.5 nA | [DATA_NEEDED: input bias current] |
| Arus Pemuat | 200 µA per comparator | — |
| Response Time | 1 µs | — |
| ESD Rating (HBM) | 2 kV | — |
| Rentang Suhu Kerja | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Output Compatibility | TTL, MOS, and CMOS | — |
| Paket | 8-pin SOIC (D) | 8-pin SOIC |
| Tipe Mounting | Surface mount | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | — |
| Single-Supply Voltage Range | — | 2 V to 36 V |
| Dual-Supply Voltage Range | — | ±1 V to ±18 V |
| Tested Supply Voltage | — | 30 V for V-device and 32 V for non-V device |
| Logic Compatibility | — | CMOS, MOS, and TTL |
| Package Width | — | 3.90 mm |
| Package Body Length | — | 0.154 inch |
| Commercial Grade | — | Commercial-grade application |
| Konfigurasi Output | — | Open-collector output with external pull-up required |
| Input Offset Voltage at 25°C | — | [DATA_NEEDED: input offset voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |