LM393D vs LM393N Perbandingan
Perbandingan bersamaan detil LM393D dari Texas Instruments dan LM393N dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
LM393D - Dual Differential Comparator, 36V, Open-Collector SOIC-8 | Texas Instruments (Tape & Reel)
LM393D ✓ Aktif
Perbandingan Spesifikasi
| Parameter Umum | LM393D | LM393N |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Texas Instruments | — |
| Part Number | LM393D | — |
| Fungsi | Dual Differential Comparator | — |
| Number of Channels | 2 | — |
| Tipe Output | Open-Collector | Open-Collector / Open-Drain (single-ended) |
| Supply Voltage (Single) | 2 V to 36 V | — |
| Supply Voltage (Dual) | ±1 V to ±18 V | — |
| Input Offset Voltage (typical) | 1 mV | — |
| Input Bias Current (typical) | 25 nA | — |
| Supply Current per Comparator | 0.4 mA (typical) | — |
| Response Time | 1.3 µs (typical) | — |
| Common-Mode Input Range | 0 V to VCC − 1.5 V | 0 V to VCC - 1.5 V (ground sensing) |
| Rentang Suhu Kerja | 0 °C to +70 °C | 0 C to +70 C (LM393N) / -40 C to +85 C (LM2903N) |
| Paket | SOIC-8 (D), 3.90 mm body width | 8-PDIP (DIP-8, through-hole) |
| Tipe Mounting | Surface Mount | Through-Hole |
| ESD Rating (HBM, B-version) | 2 kV | — |
| Status RoHS | Compliant | Non-RoHS (LM393N); RoHS on LM393N/NOPB variant |
| Lead-Free | Yes | — |
| Comparator Type | — | Dual General-Purpose Comparator |
| Number of Comparators | — | 2 (dual) |
| Input Offset Voltage (max) | — | 5 mV (LM393N); 2 mV (LM193/LM393A grade) |
| Input Bias Current (typ) | — | 25 nA |
| Supply Voltage Range (single supply) | — | 2 V to 36 V |
| Supply Voltage Range (dual supply) | — | ±1 V to ±18 V |
| Output Sink Current (max) | — | 16 mA |
| Propagation Delay (typ) | — | 1.3 us (300 mV overdrive) |
| Quiescent Current (typ) | — | 0.4 mA per comparator (0.8 mA total) |