LPC2364FBD100K vs STM32F107VCT6 Perbandingan
Perbandingan bersamaan detil LPC2364FBD100K dari NXP Semiconductors dan STM32F107VCT6 dari STMicroelectronics. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
LPC2364FBD100K - 72MHz ARM7 MCU, 128KB Flash, Ethernet/USB/CAN | NXP
LPC2364FBD100K ✓ AktifSTMicroelectronics
STM32F107VCT6 - 256KB Flash 72MHz Cortex-M3 MCU | STMicroelectronics
STM32F107VCT6 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LPC2364FBD100K | STM32F107VCT6 |
|---|---|---|
| Merek | NXP Semiconductors | STMicroelectronics |
| Kategori | Microcontrollers | Microcontrollers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Core | ARM7TDMI-S 16-bit/32-bit RISC | — |
| Maximum CPU Frequency | 72 MHz | — |
| Flash Memory | 128 KB (128K x 8) | 256 KB (256K x 8) |
| SRAM | 34 KB | 64 KB |
| Ethernet MAC | Integrated 10/100 Mbit Ethernet MAC | 10/100 Mbps with dedicated DMA |
| USB | USB 2.0 device, host and OTG controller | — |
| CAN Controllers | 2 channels | 2 x CAN 2.0B |
| UART | 4 channels | — |
| SPI / SSP | 3 channels | — |
| I2C | 3 channels | 2 I2Cs |
| ADC | 8-channel, 10-bit | 2 x 12-bit, up to 16 channels |
| DAC | 10-bit | — |
| Timers | 4 general-purpose timers, 2 PWM channels | 10 timers (general-purpose + PWM) |
| DMA Controller | General-purpose DMA | — |
| Audio Interface | I2S | — |
| Paket | LQFP-100 (14 x 14 mm), gull-wing | 100-pin LQFP (14x14 mm) |
| Temperature Grade | Industrial | — |
| Programming | ISP and IAP (In-System / In-Application Programming) | — |
| Tipe Mounting | Surface Mount | Surface Mount |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant |
| Core Architecture | — | ARM Cortex-M3 32-bit RISC |
| Frekuensi Bawah Maximum | — | 72 MHz |
| Supply Voltage Range | — | 2.0 V to 3.6 V |
| Rentang Suhu Kerja | — | -40 C to +85 C |
| USB Interface | — | USB 2.0 OTG full-speed (on-chip PHY) |
| USART / UART | — | 5 USARTs |
| SPI | — | 3 SPIs |
| Debug Interface | — | JTAG and SWD |
| Low-Power Modes | — | Sleep, Stop, Standby |
| Level MSL | — | [DATA_NEEDED: MSL level] |