LT1012CD vs OPA227PA Perbandingan
Perbandingan bersamaan detil LT1012CD dari Texas Instruments dan OPA227PA dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
LT1012CD - Precision Op Amp, 25µV Offset, 8-SOIC | Texas Instruments
LT1012CD ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LT1012CD | OPA227PA |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Texas Instruments (originally Linear Technology) | — |
| Amplifier Type | Precision Operational Amplifier | Single precision operational amplifier |
| Number of Circuits | 1 | 1 circuit |
| Input Offset Voltage (Vos) | 25 µV typical, 200 µV maximum | — |
| Input Bias Current (Ib) | 40 pA maximum | — |
| Slew Rate | 0.2 V/µs typical | 10 V/µs |
| Voltage Gain (Aol) | 1,000,000 (1M) minimum | — |
| Output Current | 5 mA (with voltage gain of 1M) | — |
| Common-Mode Rejection Ratio (CMRR) | Extremely high (per datasheet) | — |
| Power Supply Rejection Ratio (PSRR) | Extremely high (per datasheet) | — |
| Supply Voltage Range | ±2 V to ±20 V (typical dual supply) | — |
| Rentang Suhu Kerja | -40°C to +85°C (commercial grade) | -40 °C to 85 °C |
| Paket | 8-SOIC (0.154", 3.90 mm width) | — |
| Tipe Mounting | Surface Mount | Through-hole |
| Compensation | Internally compensated | — |
| Power Dissipation (Ni-Cad operation) | 1 mW | — |
| Status RoHS | [DATA_NEEDED: rohs status] | [DATA_NEEDED: RoHS status] |
| Level MSL | [DATA_NEEDED: MSL level] | — |
| Tetesan Bising | — | 3 nV/√Hz |
| Gain-Bandwidth Product | — | 8 MHz |
| Settling Time | — | 5 µs |
| Input Offset Voltage | — | 10 µV maximum |
| Common-Mode Rejection Ratio | — | 138 dB |
| Maximum Supply Voltage | — | 18 V |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain value] |
| Package Type | — | PDIP-8 |
| Jumlah Pin | — | 8 pins |
| REACH Status | — | [DATA_NEEDED: REACH status] |