LTC3310SIV#WPBF vs LTC3310SIV-1#TRMPBF Perbandingan
Perbandingan bersamaan detil LTC3310SIV#WPBF dari Analog Devices dan LTC3310SIV-1#TRMPBF dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Analog Devices
LTC3310SIV-1#TRMPBF - 10A, 5.5V Sync Step-Down Silent Switcher 2 | ADI
LTC3310SIV-1#TRMPBF ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LTC3310SIV#WPBF | LTC3310SIV-1#TRMPBF |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | DC-DC Converters | DC-DC Converters |
| Status Lingkungan Hidup | Aktif | Aktif |
| Topologi | Synchronous Step-Down (Buck) | Synchronous Step-Down (Buck) DC/DC Converter |
| Architecture | Silent Switcher 2 | — |
| Rentang Tegangan Masukan | 2.25 V to 5.5 V | 2.25 V to 5.5 V |
| Rentang Tegangan Output | 0.5 V to 5.5 V (adjustable) | — |
| Arus Output Maximum | 10 A | 10 A |
| Jumlah Output | 1 | — |
| Frekuensi Pengganti | 2 MHz (programmable 1 MHz to 3 MHz) | — |
| Peak Efficiency | 95% | — |
| Output Voltage Accuracy | ±1% | — |
| Rentang Suhu Kerja | -40 °C to +125 °C | -40 C to +125 C |
| Paket | 18-LQFN (3 mm × 3 mm) Exposed Pad | 18-lead LQFN, 3 mm x 3 mm, exposed pad (IV suffix) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Internal Hot-Loop Bypass Capacitor | Yes | — |
| Mulai Dengan Lebih Lambat | Internal, programmable via TRACK/SS | — |
| Output Power Good | Yes | — |
| Status RoHS | Compliant | Compliant (#TRMPBF suffix) |
| Output Voltage (LTC3310SIV-1) | — | 1 V fixed |
| Switching Architecture | — | Silent Switcher 2 with internal hot-loop bypass |
| Maximum Switching Frequency | — | 5 MHz (programmable) |
| Quiescent Current (Burst Mode) | — | < 1 uA typical |
| Efficiency (Peak) | — | [DATA_NEEDED: typical efficiency curve at VIN=5V VOUT=1V] |
| Level MSL | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |
| Enable Input | — | Yes (active-high, low-Iq shutdown when low) |
| Output Voltage Remote Sense | — | AGND pin (Pin 2) for Kelvin feedback |
| Operating Modes | — | Burst Mode / Forced-Continuous / Pulse-Skipping (selectable via MODE pin) |