MAX128ACAI vs MAX128AEAI Perbandingan
Perbandingan bersamaan detil MAX128ACAI dari Maxim Integrated dan MAX128AEAI dari Maxim Integrated. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Maxim Integrated
MAX128ACAI - 12-Bit 8-Ch DAS, +5V, I2C, 28-SSOP | Maxim Integrated
MAX128ACAI ObsoletePerbandingan Spesifikasi
| Parameter Umum | MAX128ACAI | MAX128AEAI |
|---|---|---|
| Merek | Maxim Integrated | Maxim Integrated |
| Kategori | ADC/DAC | ADC/DAC |
| Status Lingkungan Hidup | Obsolete | Aktif |
| Resolusi | 12 bits | 12 bits |
| Number of Analog Input Channels | 8 | — |
| Laju Pengambilan Sampel | 8 ksps | 8 ksps |
| Tegangan Pemuat | +5V (single supply) | +5 V single supply |
| Input Type | Single-Ended | — |
| Data Interface | I2C-compatible 2-wire serial | — |
| Architecture | SAR (Successive Approximation) | SAR (Successive Approximation Register) |
| Configuration | MUX-S/H-ADC (1:1 S/H:ADC ratio) | — |
| Number of A/D Converters | 1 | — |
| Input Ranges | 0 to +VREF, 0 to +VREF/2, ±VREF, ±VREF/2 (software-selectable) | 0 to VREF, 0 to VREF/2, ±VREF, ±VREF/2 (4 software-selectable) |
| Reference Type | Internal (4.096V, MAX128A variant) | — |
| Input Overvoltage Tolerance | ±16.5V (fault-protected) | — |
| Linearity (DNL) | ±1/2 LSB (max) | — |
| Paket | 28-SSOP (5.30 mm body width) | 28-pin SSOP |
| Tipe Mounting | Surface Mount | Surface Mount |
| Rentang Suhu Kerja | 0C to +70C (commercial, C grade) | — |
| I2C Address Selection | ADD pin, 4 selectable addresses | — |
| Number of Input Channels | — | 8 analog inputs |
| Serial Interface | — | 2-wire I2C-compatible |
| Integral Non-Linearity (INL) | — | 1/2 LSB (max) |
| Overvoltage Tolerance | — | ±16.5 V |
| Reference Buffer | — | Internal, active in standby (eliminates startup delay) |
| Address Select Pins | — | 2 (AS0, AS1 - allows 4 devices per I2C bus, up to 32 channels) |
| Operating Temperature Grade | — | Industrial (A suffix) |
| Arus Menutup | — | [DATA_NEEDED: shutdown current value] |