MAX1480BEPI+ vs MAX1480CCPI+ Perbandingan

Perbandingan bersamaan detil MAX1480BEPI+ dari Maxim Integrated dan MAX1480CCPI+ dari Maxim Integrated. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Maxim Integrated
MAX1480BEPI+ MAX1480BEPI+ - 250kbps Isolated RS-485/RS-422 | Maxim

MAX1480BEPI+ - 250kbps Isolated RS-485/RS-422 | Maxim

MAX1480BEPI+ ✓ Aktif
Maxim Integrated
MAX1480CCPI+ MAX1480CCPI+ - 250kbps Isolated RS-485/422 | Maxim Integrated

MAX1480CCPI+ - 250kbps Isolated RS-485/422 | Maxim Integrated

MAX1480CCPI+ ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum MAX1480BEPI+ MAX1480CCPI+
Merek Maxim Integrated Maxim Integrated
Kategori Interface ICs Interface ICs
Status Lingkungan Hidup Aktif Aktif
Product Type Complete electrically isolated RS-485/RS-422 data interface Isolated RS-485/RS-422 transceiver
Transceiver Configuration 1 driver / 1 receiver —
Duplex Mode Half-duplex Half duplex
Supported Protocols RS-422 and RS-485 —
Laju Data 250 kb/s —
Isolation Electrically isolated Galvanically isolated logic-side and bus-side interfaces
Driver Slew Rate Reduced-slew-rate driver Reduced slew rate
Receiver Hysteresis 70 mV —
Supply Architecture Single +5 V supply on logic side powers both sides —
Paket 28-pin PDIP 28-pin DIP, 0.600 in (15.24 mm) width
Paket / Case 28-DIP (0.600 inch, 15.24 mm) —
Tipe Mounting Through-hole Through-hole
Suhu Kerja 0 °C to +70 °C —
Application Category EMI-sensitive isolated data interfaces —
RoHS [DATA_NEEDED: RoHS status] —
REACH [DATA_NEEDED: REACH status] —
AEC-Q100 [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
Isolation Voltage [DATA_NEEDED: isolation voltage rating] [DATA_NEEDED: isolation withstand voltage]
Common-Mode Voltage [DATA_NEEDED: common-mode voltage rating] —
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Input Impedance [DATA_NEEDED: receiver input impedance] —
Driver and Receiver Configuration — 1 driver and 1 receiver
Maximum Data Rate — 250 kbps
Supply Voltage Range — 4.5 V to 5.5 V
Supported Standards — RS-485 and RS-422
Logic-Side Supply — Single 5 V supply powers both sides of the interface
Driver Count — 1
Receiver Count — 1
Rentang Suhu Kerja — [DATA_NEEDED: operating temperature range]
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
Arus Memerintah — [DATA_NEEDED: quiescent current]
Status RoHS — unknown
REACH Status — unknown
AEC-Q100 Qualification — not_applicable

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon