MAX1480CCPI+ vs MAX1480BEPI+ Perbandingan
Perbandingan bersamaan detil MAX1480CCPI+ dari Maxim Integrated dan MAX1480BEPI+ dari Maxim Integrated. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | MAX1480CCPI+ | MAX1480BEPI+ |
|---|---|---|
| Merek | Maxim Integrated | Maxim Integrated |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Isolated RS-485/RS-422 transceiver | Complete electrically isolated RS-485/RS-422 data interface |
| Driver and Receiver Configuration | 1 driver and 1 receiver | — |
| Duplex Mode | Half duplex | Half-duplex |
| Maximum Data Rate | 250 kbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Isolation | Galvanically isolated logic-side and bus-side interfaces | Electrically isolated |
| Driver Slew Rate | Reduced slew rate | Reduced-slew-rate driver |
| Supported Standards | RS-485 and RS-422 | — |
| Paket | 28-pin DIP, 0.600 in (15.24 mm) width | 28-pin PDIP |
| Tipe Mounting | Through-hole | Through-hole |
| Logic-Side Supply | Single 5 V supply powers both sides of the interface | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | — |
| Isolation Voltage | [DATA_NEEDED: isolation withstand voltage] | [DATA_NEEDED: isolation voltage rating] |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Arus Memerintah | [DATA_NEEDED: quiescent current] | — |
| Status RoHS | unknown | — |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Transceiver Configuration | — | 1 driver / 1 receiver |
| Supported Protocols | — | RS-422 and RS-485 |
| Laju Data | — | 250 kb/s |
| Receiver Hysteresis | — | 70 mV |
| Supply Architecture | — | Single +5 V supply on logic side powers both sides |
| Paket / Case | — | 28-DIP (0.600 inch, 15.24 mm) |
| Suhu Kerja | — | 0 °C to +70 °C |
| Application Category | — | EMI-sensitive isolated data interfaces |
| RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Common-Mode Voltage | — | [DATA_NEEDED: common-mode voltage rating] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |