MAX14852GWE+ vs MAX14882AWE+ Perbandingan
Perbandingan bersamaan detil MAX14852GWE+ dari Analog Devices dan MAX14882AWE+ dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Analog Devices
MAX14852GWE+ - 2.75kV Isolated RS-485/RS-422 Transceiver | Maxim Integrated
MAX14852GWE+ ✓ AktifAnalog Devices
MAX14882AWE+ - 5kVRMS Isolated CAN Transceiver, 16-SOIC | Analog Devices
MAX14882AWE+ ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MAX14852GWE+ | MAX14882AWE+ |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | Interface ICs | USB Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Fungsi | Transceiver | Isolated High-Speed CAN Transceiver |
| Protocol | RS-422, RS-485 | ISO 11898-2 CAN |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex | Full | — |
| Data Rate (low-speed mode) | 500 kbps | — |
| Data Rate (high-speed mode) | 25 Mbps | — |
| Galvanic Isolation Rating | 2.75 kVRMS (60 s) | — |
| Supply Voltage (VVDD / VBUS) | 1.71 V to 5.5 V | — |
| ESD Protection (HBM, bus pins) | ±35 kV | — |
| Suhu Kerja | -40 °C to +105 °C | — |
| Paket | 16-pin WSOIC (7.50 mm body width) | 16-pin Wide SOIC (W SOIC) |
| Tipe Mounting | Surface Mount | — |
| Fail-safe Receiver | Yes | — |
| Hot-swap Tolerant | Yes | — |
| Status RoHS | Compliant | Compliant |
| Isolation Technology | Maxim iso-loop (integrated transformer driver) | — |
| Laju Data | — | up to 1 Mbps |
| Galvanic Isolation Voltage | — | 5000 VRMS (60s) |
| VDDA Supply Voltage (Controller-side) | — | 3.0 V to 5.5 V |
| VDDB Supply Voltage (Bus-side) | — | 4.5 V to 5.5 V |
| Receiver Common-Mode Range | — | -25 V to +25 V |
| CANH/CANL Fault Tolerance | — | ±54 V |
| ESD Protection (Bus-side, HBM) | — | ±15 kV |
| Integrated Transformer Driver | — | Yes |
| Auxiliary LDO Output Current | — | 130 mA internal / 300 mA max |
| Rentang Suhu Kerja | — | -40 °C to +125 °C |
| Creepage and Clearance | — | 8 mm |