MAX194BCPE vs MAX197AENI Perbandingan
Perbandingan bersamaan detil MAX194BCPE dari Maxim Integrated dan MAX197AENI dari Maxim Integrated. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Maxim Integrated
MAX194BCPE - 14-Bit 85ksps SAR ADC | Maxim Integrated / Analog Devices
MAX194BCPE Obsolete
Perbandingan Spesifikasi
| Parameter Umum | MAX194BCPE | MAX197AENI |
|---|---|---|
| Merek | Maxim Integrated | Maxim Integrated |
| Kategori | ADC/DAC | ADC/DAC |
| Status Lingkungan Hidup | Obsolete | Obsolete |
| Resolusi | 14 bit | 12 bits |
| Number of Channels | 1 | 8 |
| Laju Pengambilan Sampel | 85 ksps | 100 ksps |
| Architecture | SAR (Successive Approximation) with capacitive DAC | SAR (Successive Approximation) |
| Conversion Time | 9.4 us | — |
| Integral Nonlinearity (INL) | 1/2 LSB (max) | ±0.5 LSB (A grade) |
| Signal-to-Noise and Distortion (SINAD) | 82 dB at 5 kHz input | — |
| Arus Menutup | 10 uA | — |
| Analog Input Range | Unipolar 0V to VREF; Bipolar -VREF to +VREF | — |
| Antarmuka | Serial (SPI / QSPI / MICROWIRE compatible) | — |
| Reference Voltage Input | External (dedicated VREF pin) | — |
| Supply Voltage (VDD) | 5 V (analog) + 3 V to 5.25 V (VLOGIC) | — |
| Paket / Case | 16-pin PDIP (PE) - through-hole | — |
| Rentang Suhu Kerja | 0C to +70C (commercial, C grade) | — |
| Tipe Mounting | Through-Hole DIP | — |
| Track/Hold | Built-in | — |
| Auto-Calibration | Yes, internal (linearity + offset) | — |
| Status RoHS | Non-compliant (PE suffix = PDIP with SnPb lead finish) | Non-compliant (PDIP package) |
| Tegangan Pemuat | — | Single +5 V ±5% |
| Analog Input Ranges | — | ±10 V, ±5 V, 0-10 V, 0-5 V (software selectable) |
| Internal Reference | — | 4.096 V |
| External Reference Support | — | Yes (1.0 V to 4.096 V) |
| Input Overvoltage Protection | — | ±25 V (without damage) |
| Digital I/O Compatibility | — | TTL/CMOS |
| Lebar Bus Data | — | 8-bit (with 8+4 mode) |
| Paket | — | 28-pin PDIP (N) |
| Suhu Kerja | — | -40 °C to +85 °C (industrial) |
| Conversion Mode | — | Software/Hardware trigger |