MAX202ECSE+TG068 vs MAX202ESE-TG068 Perbandingan
Perbandingan bersamaan detil MAX202ECSE+TG068 dari Analog Devices dan MAX202ESE-TG068 dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | MAX202ECSE+TG068 | MAX202ESE-TG068 |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| Transceiver Configuration | 2/2 full RS-232 | — |
| Supported Protocol | RS-232 | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| ESD Protection | 15 kV | — |
| Paket | 16-SOIC, 0.154 in x 3.90 mm width | 16-pin SOIC |
| Packaging | Tape and reel | — |
| Tipe Mounting | Surface mount | Surface mount |
| Jumlah Pin | 16 | — |
| Driver Output Count | 2 | — |
| Receiver Input Count | 2 | — |
| Communication Mode | Full duplex | — |
| Operating Voltage | 4.5 V to 5.5 V | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Laju Data | [DATA_NEEDED: maximum data rate] | In excess of 120 kbps |
| Output High and Low Levels | [DATA_NEEDED: RS-232 output voltage levels] | — |
| Input Hysteresis | [DATA_NEEDED: receiver input hysteresis] | — |
| Arus Pemuat | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: supply current] |
| Status RoHS | [DATA_NEEDED: RoHS status] | RoHS |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Device Type | — | RS-232 transceiver |
| Channel Configuration | — | 2 driver / 2 receiver |
| Tegangan Pemuat | — | 5 V |
| RS-232 Output Signal Levels | — | Plus or minus 5 V |
| Interface Standard | — | EIA/TIA-232E |
| External Charge-Pump Capacitor | — | 0.1 uF |
| Transceiver Type | — | Full-duplex |
| Logic Compatibility | — | [DATA_NEEDED: logic compatibility] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Driver Output Resistance | — | [DATA_NEEDED: driver output resistance] |