MAX232ECDWRG4 vs MAX232IDR Perbandingan
Perbandingan bersamaan detil MAX232ECDWRG4 dari Texas Instruments dan MAX232IDR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
MAX232IDR - 120 kbps Dual RS-232 Transceiver | Texas Instruments
MAX232IDR ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MAX232ECDWRG4 | MAX232IDR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Number of Drivers | 2 drivers | — |
| Number of Receivers | 2 receivers | — |
| Tipe Antarmuka | RS-232 transceiver | — |
| Laju Data | 120 kbit/s | — |
| Tegangan Pemuat | 5 V | — |
| Charge-Pump Capacitor Value | 1.0 uF each | — |
| Receiver Input Voltage Range | -30 V to +30 V | — |
| ESD Protection Standard | IEC 61000-4-2 | — |
| RS-232 Compliance | TIA/RS-232-F and ITU Recommendation V.28 | — |
| Package Pin Count | 16 pins | — |
| Package Type | 16-pin SOIC | — |
| Rentang Suhu Kerja | 0 C to +70 C | [DATA_NEEDED: operating temperature range] |
| Tipe Mounting | Surface mount | Surface mount |
| Arus Pemuat | [DATA_NEEDED: supply current] | 8 mA typical |
| Driver Output Voltage | [DATA_NEEDED: driver output voltage] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Product Type | — | Dual RS-232 transceiver |
| Transmitter Channels | — | 2 |
| Receiver Channels | — | 2 |
| Maximum Data Rate | — | 120 kbit/s |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Nominal Supply Voltage | — | 5 V |
| Driver Output Level | — | Approximately ±9 V |
| Receiver Input Level Range | — | ±30 V |
| ESD Protection | — | ±2 kV |
| Supported Standards | — | TIA/EIA-232-F and ITU Recommendation V.28 |
| Paket | — | 16-pin SOIC |
| Interface Standard | — | RS-232 / EIA-232 |
| Supply Configuration | — | Single supply |
| Status RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |