MAX3221IDBR vs MAX3221IDBRE4 Perbandingan
Perbandingan bersamaan detil MAX3221IDBR dari Texas Instruments dan MAX3221IDBRE4 dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
MAX3221IDBRE4 - 250kbps RS-232 Transceiver | Texas Instruments
MAX3221IDBRE4 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MAX3221IDBR | MAX3221IDBRE4 |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Single-channel RS-232 line driver and receiver | Single-channel RS-232 line driver and receiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps |
| Number of Drivers | 1 | 1 |
| Number of Receivers | 1 | 1 |
| ESD Protection | ±15 kV HBM on serial-port connection pins, including GND | ±15 kV HBM |
| Typical Standby Current | 1 µA | — |
| External Charge-Pump Capacitors | 4 × 0.1 µF | 4 × 0.1 µF |
| Receiver Enable Control | 1 dedicated enable input | — |
| Logic Input Compatibility | Accepts 5 V logic input with 3.3 V supply | — |
| RS-232 Compliance | TIA/EIA-232-F and ITU V.28 | — |
| Charge-Pump Architecture | Dual charge-pump circuit | — |
| Paket | 16-pin SSOP | 16-pin SSOP |
| Tipe Mounting | Surface mount | Surface mount |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Driver and Receiver Configuration | — | 1/1 full RS-232 transceiver |
| Standby Current | — | 1 µA typical |
| 5 V Logic Input Compatibility | — | 5 V logic input accepted with 3.3 V supply |
| RS-232 Standards | — | TIA/EIA-232-F and ITU V.28 |
| Package Width | — | 5.30 mm |
| Receiver Enable | — | Dedicated enable input |