MAX3485ESA+T vs THVD1452DR Perbandingan

Perbandingan bersamaan detil MAX3485ESA+T dari Analog Devices dan THVD1452DR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Perbandingan Spesifikasi

Parameter Umum MAX3485ESA+T THVD1452DR
Merek Analog Devices Texas Instruments
Kategori Interface ICs Interface ICs
Status Lingkungan Hidup Aktif Aktif
Product Type RS-485/RS-422 transceiver —
Tegangan Pemuat 3.3 V —
Maximum Data Rate 10 Mbps 50 Mbps
Driver Count 1 —
Receiver Count 1 —
Duplex Mode Half-duplex —
Supported Standards RS-422 and RS-485 —
Paket 8-SOIC SOIC-14 (D)
Package Dimensions 3.90 mm width —
Tipe Mounting Surface mount Surface Mount
Ordering Package Tape and reel —
Rentang Suhu Kerja [DATA_NEEDED: operating temperature range] —
Arus Pemuat [DATA_NEEDED: supply current] —
Driver Propagation Delay [DATA_NEEDED: driver propagation delay] —
Receiver Propagation Delay [DATA_NEEDED: receiver propagation delay] —
ESD Protection [DATA_NEEDED: ESD protection rating] —
Common-Mode Voltage Range [DATA_NEEDED: receiver common-mode voltage range] -7 V to +12 V
RoHS Compliance [DATA_NEEDED: RoHS compliance status] —
REACH Compliance [DATA_NEEDED: REACH compliance status] —
Protocol — RS-422 / RS-485
Fungsi — 1/1 Transceiver, full-duplex
Number of Drivers/Receivers — 1/1
Supply Voltage (VCC) — 3.0 V to 5.5 V
IEC ESD Protection (Bus Pins) — ±18 kV air-gap (IEC 61000-4-2); ±8 kV contact
HBM ESD Protection — ±16 kV (all pins, HBM)
Bus Unit Load — 1/8 UL (up to 256 nodes)
Receiver Fail-safe — True fail-safe (idle/short/open = logic high)
Quiescent Current (no load) — [DATA_NEEDED: Iq value]
Suhu Kerja — -40°C to +125°C
Level MSL — 1 (per TI product page)
Status RoHS — Compliant
Lead-free / Halogen-free — Yes / Yes
AEC-Q100 Automotive — Not applicable (no -Q1 suffix)

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon