MAX3488CPA+ vs MAX3488CSA+ Perbandingan
Perbandingan bersamaan detil MAX3488CPA+ dari Maxim Integrated dan MAX3488CSA+ dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Analog Devices
MAX3488CSA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3488CSA+ ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MAX3488CPA+ | MAX3488CSA+ |
|---|---|---|
| Merek | Maxim Integrated | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Tegangan Pemuat | 3.3 V | 3.3 V |
| Maximum Data Rate | 10 Mbps | 10 Mbps |
| Driver Count | 1 | 1 |
| Receiver Count | 1 | 1 |
| Interface Standards | RS-485 and RS-422 | — |
| Slew Rate | Slew-rate limited | — |
| Logic Compatibility | +5 V logic interoperable | — |
| Paket | 8-pin PDIP | 8-pin NSOIC |
| Tipe Mounting | Through-hole | Surface mount |
| Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Differential Output Voltage | [DATA_NEEDED: differential output voltage] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Arus Memerintah | [DATA_NEEDED: quiescent current] | — |
| Driver Enable Control | [DATA_NEEDED: enable-control configuration] | — |
| Receiver Output Logic | [DATA_NEEDED: receiver output logic] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Driver Edge Control | — | Slew-rate limited |
| Communication Standard | — | RS-485/RS-422 |
| Low-Power Family | — | 3.3 V, low-power transceiver |
| Cable Reflection Control | — | Slew-rate-limited driver intended to reduce reflections |
| EMI Control | — | Slew-rate-limited driver intended to reduce EMI |
| Application Topology | — | RS-422 point-to-point and RS-485 multidrop |
| Differential Signal | — | Balanced line signaling |
| Logic Interface | — | Digital logic-level driver and receiver |
| Manufacturer Product Status | — | Production |
| Manufacturer Data Sheet Revision | — | Rev. 2 |
| ESD Rating | — | [DATA_NEEDED: ESD rating] |
| Typical Quiescent Current | — | [DATA_NEEDED: quiescent current] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Isolation | — | [DATA_NEEDED: isolation rating] |