MPVZ5004GW7U vs MPVZ5004G6U Perbandingan
Perbandingan bersamaan detil MPVZ5004GW7U dari NXP Semiconductors dan MPVZ5004G6U dari STMicroelectronics. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
STMicroelectronics
MPVZ5004G6U - 3.92kPa Vented Gauge Pressure Sensor 8-SMD | ST
MPVZ5004G6U ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MPVZ5004GW7U | MPVZ5004G6U |
|---|---|---|
| Merek | NXP Semiconductors | STMicroelectronics |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 3.92 kPa (0 to 0.57 psi) | 0 to 3.92 kPa (0 to 0.57 PSI) |
| Pressure Port | Male 0.22" (5.59 mm) tube, single axial | Single axial vent port (gauge reference) |
| Tipe Output | Analog voltage, ratiometric | Analog Voltage |
| Output Voltage Span | 1.0 V to 4.9 V (at 5 V excitation) | 1 V to 4.9 V (at 5 V supply) |
| Output Voltage at 0 kPa | 1.0 V typ | — |
| Tegangan Pemuat | 5.0 V (typ) | 5 V typical |
| Arus Pemuat | 4 mA typ (per datasheet family) | [DATA_NEEDED: supply current] |
| Accuracy | [DATA_NEEDED: linearity/error %] | [DATA_NEEDED: accuracy] |
| Suhu Kerja | 0 °C to 85 °C | 0 to 85 degrees Celsius |
| Storage Temperature | [DATA_NEEDED: storage temperature range] | — |
| Paket | 8-DIP Module (Case 1560-02) | 8-SMD Module |
| Tipe Mounting | Through-Hole (DIP module with tube port) | Surface Mount |
| Technology | Piezoresistive MEMS, monolithic silicon | — |
| Signal Conditioning | On-chip amplifier, temperature-compensated, calibrated | — |
| Sensitivity | approx. 1.0 V / kPa | — |
| Media Compatibility | Non-corrosive dry gases (air) | — |
| Status RoHS | [DATA_NEEDED: confirm from datasheet] | Compliant |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Response Time | — | 1 ms typical |
| Sensor Technology | — | Piezoresistive MEMS |
| Output Ratiometric | — | Yes (scales with VDD) |