MPX12GP vs MPX2010GP Perbandingan
Perbandingan bersamaan detil MPX12GP dari NXP Semiconductors dan MPX2010GP dari STMicroelectronics. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
STMicroelectronics
MPX2010GP - 10 kPa Vented Gauge Pressure Sensor | STMicroelectronics
MPX2010GP ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MPX12GP | MPX2010GP |
|---|---|---|
| Merek | NXP Semiconductors | STMicroelectronics |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Obsolete | Aktif |
| Pressure Type | Vented Gauge | Vented Gauge |
| Maximum Pressure | 1.45 PSI (10 kPa) | — |
| Operating Pressure Range | 0 kPa to 10 kPa | 0 kPa to 10 kPa (0 to 1.45 PSI) |
| Tipe Output | Analog Voltage (Wheatstone bridge, uncompensated) | — |
| Output Span @ 3 V | 0 mV to 55 mV | — |
| Supply Voltage (typical) | 3 V DC | — |
| Excitation Type | Constant voltage or constant current | — |
| Port Style | Male 0.19" (4.93 mm) axial tube | Male, 0.19 inch (4.93 mm) tube, vented gauge |
| Jumlah Pin | 4 | — |
| Paket / Case | 4-SIP Module (Case 344B-01) | 4-SIP Module (Case 344B-01) |
| Suhu Kerja | -40 °C to +125 °C | — |
| Tipe Mounting | Through Hole | Through-Hole (SIP) |
| Linearity | ±0.5 % (typical) | [DATA_NEEDED: linearity %FS] |
| Compensation | Uncompensated (external compensation required) | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Sensitivity (Full-Scale Span) | — | 25 mV typical at 10 V excitation |
| Rentang Tegangan Output | — | 0 mV to 25 mV (10 V supply) |
| Offset (Zero Pressure) | — | 0 mV nominal |
| Supply Voltage (Excitation) | — | 10 V DC typical (max per datasheet) |
| Arus Pemuat | — | 6 mA DC typical |
| Response Time | — | 1 ms typical |
| Temperature Compensation | — | On-chip, calibrated |
| Rentang Suhu Kerja | — | -40 C to +125 C |
| Storage Temperature Range | — | -40 C to +125 C |
| Media Compatibility | — | Dry gases (silicone gel isolation) |