MPX2102AP vs MPX2100AP Perbandingan
Perbandingan bersamaan detil MPX2102AP dari STMicroelectronics dan MPX2100AP dari STMicroelectronics. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
STMicroelectronics
MPX2102AP - 100kPa Absolute Pressure Sensor 4-SIP | STMicroelectronics
MPX2102AP ✓ AktifSTMicroelectronics
MPX2100AP - 100kPa Absolute Pressure Sensor | STMicroelectronics
MPX2100AP ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MPX2102AP | MPX2100AP |
|---|---|---|
| Merek | STMicroelectronics | STMicroelectronics |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 14.5 PSI (100 kPa) | 0 to 100 kPa (0 to 14.5 psi) |
| Maximum Overload Pressure | 14.5 PSI (100 kPa) | — |
| Port Type | Male - 0.19" (4.93 mm) Tube | — |
| Tipe Output | Analog Wheatstone Bridge | Analog Voltage (Wheatstone bridge) |
| Tegangan Output | 0 mV to 40 mV at 10 V excitation | — |
| Tegangan Pemuat | 10 V (typical ratiometric) | — |
| Linearity | ±0.5% (typ) | ±0.25% (Full-Scale Span) |
| Suhu Kerja | 0 °C to +85 °C | — |
| Paket | 4-SIP Module (Unibody) | — |
| Tipe Mounting | Through-Hole | Through-Hole (SIP) |
| Diaphragm Technology | Silicon Piezoresistive | — |
| Response Time | [DATA_NEEDED: response time ms] | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Style | Tube Port | — |
| Full-Scale Output Span | — | 40 mV typical at 10 V excitation |
| Offset (Zero Pressure) | — | 0 mV typical |
| Excitation Voltage | — | 10 V DC typical |
| Temperature Compensation | — | On-chip, ±0.5% over 0°C to 85°C |
| Rentang Suhu Kerja | — | -40°C to +125°C |
| Storage Temperature Range | — | [DATA_NEEDED: storage temperature range] |
| Port Style | — | Axial Male Tube, 0.19 inch (4.93 mm) |
| Package Type | — | 4-SIP Module |
| Sensor Technology | — | Silicon Piezoresistive |
| Media Compatibility | — | Dry gases (non-corrosive) |
| Level MSL | — | [DATA_NEEDED: MSL moisture sensitivity level] |