MPX5010GP vs MPX5010GS Perbandingan
Perbandingan bersamaan detil MPX5010GP dari NXP Semiconductors dan MPX5010GS dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | MPX5010GP | MPX5010GS |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | NRND | Aktif |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 10 kPa (0 to 1.45 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Tegangan Pemuat | 4.75 V to 5.25 V (typical 5 V) | — |
| Arus Pemuat | [DATA_NEEDED: supply current] | 5 mA typical |
| Tipe Output | Analog, ratiometric | Analog, ratiometric |
| Rentang Tegangan Output | 0.2 V to 4.7 V | 0.2 V to 4.7 V at 5 V supply |
| Full-Scale Span | 4.5 V (typical) | — |
| Zero Pressure Offset | 0.2 V typical at VS = 5 V | — |
| Accuracy | ±1.5% (per datasheet, factory calibrated) | +/-2.5% of full-scale span |
| Suhu Kerja | [DATA_NEEDED: operating temperature range] | 0 C to +85 C (compensated) |
| Compensated Temperature | 0 °C to 85 °C | — |
| Port Configuration | Male 0.19" (4.93 mm) tube, single vented port | — |
| Paket | 6-SIP module (Unibody) | 6-SIP Module, Case 867E-03 |
| Technology | Piezoresistive MEMS with on-chip ASIC | — |
| Tipe Mounting | Through-Hole | Through-hole, axial tube |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Tegangan Pemuat Kerja | — | 4.75 V to 5.25 V (5 V typical) |
| Response Time | — | 1.0 ms typical |
| Storage Temperature | — | -40 C to +125 C |
| Port Type | — | Male 0.19" (4.93 mm) tube, axial |
| Sensing Technology | — | Piezoresistive (silicon strain gauge) |