NCP45520IMNTWG-H vs NCP45560IMNTWG-H Perbandingan
Perbandingan bersamaan detil NCP45520IMNTWG-H dari onsemi dan NCP45560IMNTWG-H dari onsemi. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | NCP45520IMNTWG-H | NCP45560IMNTWG-H |
|---|---|---|
| Merek | onsemi | onsemi |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | onsemi | — |
| Series | ecoSWITCH (NCP45520 / NCP45521) | — |
| Fungsi | Load Switch / Power Distribution Switch | — |
| Topologi | 1:1 N-Channel integrated load switch | High-side N-Channel MOSFET |
| Continuous Load Current | 10.5 A (11.5 A per datasheet description) | 17 A |
| On-Resistance (Ron) | 12.8 mOhm typical | — |
| Input / Output Voltage Range (Vout / VIN) | 0.5 V to 13.5 V | — |
| Enable Input | Active-High | Logic-level ON/OFF |
| Output Power Good | Active-High, open-drain (requires >=1 kOhm pull-up) | Yes (open-drain flag) |
| Soft-Start / Slew-Rate Control | Yes, external SS capacitor | — |
| Fault Protection | Thermal, short-circuit, under-voltage lockout (UVLO) | Over-current, short-circuit, thermal shutdown |
| Paket | 8-DFN EP (2x2 mm) | 12-pin DFN (3x3 mm) with EP |
| Tipe Mounting | Surface Mount | Surface Mount |
| Suhu Kerja | [DATA_NEEDED: Operating temperature range] | — |
| Level MSL | 3 (168 hours) per PartGenie | — |
| Status RoHS | Compliant (ROHS3 Compliant per PartGenie) | Compliant |
| REACH Status | Unaffected per PartGenie | — |
| Status Lingkungan Hidup | Active | — |
| Product Type | — | High-side load switch (ecoSWITCH) |
| Jumlah Output | — | 1 |
| On-Resistance (typ) | — | [DATA_NEEDED: typical RDS(on) in mOhm] |
| Input Voltage Range (V_IN) | — | [DATA_NEEDED: V_IN min/max] |
| Rentang Tegangan Output | — | [DATA_NEEDED: V_OUT max] |
| Mulai Dengan Lebih Lambat | — | Yes (programmable via external capacitor) |
| Rentang Suhu Kerja | — | [DATA_NEEDED: T_A min/max] |