OPA137PA vs OPA130PA Perbandingan
Perbandingan bersamaan detil OPA137PA dari Texas Instruments dan OPA130PA dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | OPA137PA | OPA130PA |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Single J-FET-input operational amplifier | Single operational amplifier |
| Number of Amplifier Channels | 1 channel | — |
| Maximum Supply Voltage | 36 V | — |
| Nominal Total Supply Voltage | ±18 V | — |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Open-Loop Gain | 145 dB | 120 dB minimum |
| Input Bias Current | ±10 pA | 20 pA maximum |
| Arus Memerintah | 120 µA per channel | 530 uA typical per amplifier |
| Slew Rate | 3.5 V/µs | [DATA_NEEDED: slew rate] |
| Maximum Input Offset Voltage | 15 mV | — |
| Input Common-Mode Range | Rail-to-rail input to V+ | — |
| Paket | 8-pin PDIP | 8-pin PDIP, 0.300 inch body width |
| Package Type | Through-hole PDIP | — |
| Product Family | MicroAmplifier | — |
| Status RoHS | Compliant | Compliant |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Arus Pemuat | [DATA_NEEDED: maximum supply current] | — |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Short-Circuit Current | [DATA_NEEDED: short-circuit current] | — |
| Level MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Input Topology | — | FET input |
| Input Offset Voltage | — | 1 mV maximum |
| Common-Mode Rejection Ratio | — | 90 dB minimum |
| Supply Voltage Range | — | 4.5 V to 36 V |
| Total Supply Voltage Range | — | 4.5 V to 36 V |
| Dual-Supply Operating Range | — | +/-18 V |
| Tipe Mounting | — | Through-hole |
| Jumlah Pin | — | 8 |
| Low Offset Voltage | — | 1 mV maximum |
| High Open-Loop Gain | — | 120 dB minimum |
| Excellent Bandwidth | — | 1 MHz |
| AEC-Q100 Qualification | — | Not applicable |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |