PCA9535DBR vs TCA9555DBR Perbandingan
Perbandingan bersamaan detil PCA9535DBR dari Texas Instruments dan TCA9555DBR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | PCA9535DBR | TCA9555DBR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Akhir Hidup | Aktif |
| Number of I/O Lines | 16 lines | — |
| Antarmuka | I2C and SMBus | — |
| Supply Voltage Range | 2.3 V to 5.5 V | 1.65 V to 5.5 V |
| Maximum Bus Clock Frequency | 400 kHz | — |
| Interrupt Output | Yes | 1 output |
| Configuration Registers | Yes | Yes |
| Maximum Standby Current | 1 uA | — |
| Paket | 24-SSOP (0.209 inch, 5.30 mm width) | 24-pin SSOP (DB) |
| Tipe Mounting | Surface mount | — |
| Packaging | Cut Tape | — |
| I/O Port Organization | Two 8-bit ports, 16 I/O total | — |
| Low-Power Operation | Low standby-current operation | — |
| Host GPIO Reduction | 16 host I/O lines | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Output Current per Line | [DATA_NEEDED: output current per line] | — |
| Input and Output Port Current | [DATA_NEEDED: input and output port current] | — |
| I2C Address Configuration | [DATA_NEEDED: I2C address configuration details] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| I/O Port Count | — | 16 bits |
| Minimum Operating Supply | — | 1.65 V |
| Maximum Operating Supply | — | 5.5 V |
| Supported Serial Buses | — | I2C and SMBus |
| Maximum I2C Bus Speed | — | 400 kHz |
| Weak Pull-Up Support | — | Yes |
| Jumlah Pin | — | 24 pins |
| Device Type | — | I/O expander |
| Port Configuration | — | 16 configurable I/O bits |
| Address Selection | — | 3 hardware address inputs |
| Device Function | — | 16-bit bidirectional I/O expansion |
| Status RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |