PCA9685PW,118 vs PCA9685PW-Q900118 Perbandingan

Perbandingan bersamaan detil PCA9685PW,118 dari NXP Semiconductors dan PCA9685PW-Q900118 dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

NXP Semiconductors
PCA9685PW,118 PCA9685PW,118 - 16-Ch 12-bit PWM LED Driver I2C | NXP

PCA9685PW,118 - 16-Ch 12-bit PWM LED Driver I2C | NXP

PCA9685PW,118 ✓ Aktif
NXP Semiconductors
PCA9685PW-Q900118 PCA9685PW-Q900118 - 16-Channel 12-bit I2C LED Controller | NXP

PCA9685PW-Q900118 - 16-Channel 12-bit I2C LED Controller | NXP

PCA9685PW-Q900118 ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum PCA9685PW,118 PCA9685PW-Q900118
Merek NXP Semiconductors NXP Semiconductors
Kategori LED Drivers LED Drivers
Status Lingkungan Hidup Aktif Aktif
Fungsi 16-channel 12-bit PWM LED controller —
Jumlah Output 16 —
PWM Resolution 12-bit (4096 steps, 0% to 100% duty cycle) 12-bit (4096 steps)
Per-Channel Output Current 25 mA —
Topologi Open-Drain / Push-Pull PWM —
Antarmuka I2C-bus, Fast-Mode Plus (up to 1 MHz) —
Supply Voltage VDD 2.3 V to 5.5 V —
Output Voltage Range (LED supply) [DATA_NEEDED: upper LED supply voltage rating] —
Internal Oscillator Frequency 25 MHz (typical) —
Output Rise/Fall Time [DATA_NEEDED: transition time in ns] —
Arus Memerintah [DATA_NEEDED: quiescent current in mA] —
Programmable I2C Addresses Up to 62 devices per bus (6 address pins) 6 selectable (A0-A5 pins), up to 62 devices per bus
Suhu Kerja -40 C to +85 C —
Paket 28-TSSOP (4.40 mm body width, SOT-355-1) TSSOP-28 (4.4 mm body, 0.65 mm pitch)
Tipe Mounting Surface Mount Surface Mount
Level MSL [DATA_NEEDED: MSL rating] [DATA_NEEDED: MSL level]
Status RoHS Compliant Compliant
Lead-Free Yes —
Primary Application RGBA backlighting and color mixing —
Product Type — I2C LED Driver / PWM Controller
Number of LED Outputs — 16
Programmable PWM Frequency — 24 Hz to 1526 Hz
Per-Channel Sink Current (Continuous) — 25 mA
Per-Channel Sink Current (Peak) — 100 mA (transient)
Logic Supply Voltage (VDD) — 2.3 V to 5.5 V
LED Supply Voltage (V+) — Up to 5.5 V (open-drain output)
I2C Interface — Standard / Fast / Fast-Mode-Plus (up to 1 MHz)
Internal Oscillator — 25 MHz (no external clock required)
Output Enable Pin (OE) — Yes, active-low
Software Reset — Yes (SWRST register)
Rentang Suhu Kerja — -40 C to +85 C

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon