PCF8574ANG4 vs PCF8574NG4 Perbandingan
Perbandingan bersamaan detil PCF8574ANG4 dari Texas Instruments dan PCF8574NG4 dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
PCF8574ANG4 - 8-Bit 100kHz I2C I/O Expander | Texas Instruments
PCF8574ANG4 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | PCF8574ANG4 | PCF8574NG4 |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Device Type | 8-bit I2C I/O expander | 8-bit I/O expander |
| Number of I/O Lines | 8 lines | 8 lines |
| Serial Interface | I2C | — |
| Maximum I2C Bus Frequency | 100 kHz | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 2.5 V to 6 V |
| Output Current per Line | [DATA_NEEDED: output current per line] | — |
| Input/Output Configuration | Bidirectional I/O, 8 lines | — |
| Package Type | 16-pin PDIP | — |
| Package Body Width | 0.300 inch | — |
| Lead Pitch | 7.62 mm | 7.62 mm |
| Gaya Mounting | Through-hole | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Arus Memerintah | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: quiescent current] |
| Standby Current | [DATA_NEEDED: standby current] | — |
| Status RoHS | RoHS3 compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Antarmuka | — | I2C |
| Bus Frequency | — | 100 kHz |
| Port Type | — | 8-bit quasi-bidirectional |
| Bus Type | — | Two-line bidirectional |
| Paket | — | 16-DIP (0.300 inch, 7.62 mm) |
| Jumlah Pin | — | 16 pins |
| Tipe Mounting | — | Through-hole |
| Interrupt Output | — | 1 open-drain interrupt output |
| Maximum Input Voltage | — | [DATA_NEEDED: maximum input voltage] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |