PCF8574DWR vs TCA9554PWR Perbandingan
Perbandingan bersamaan detil PCF8574DWR dari Texas Instruments dan TCA9554PWR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
PCF8574DWR - 8-Bit 100kHz I2C I/O Expander | Texas Instruments (Tape & Reel)
PCF8574DWR ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | PCF8574DWR | TCA9554PWR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | 8-bit I2C I/O expander | — |
| Number of I/O Ports | 8 | — |
| I2C Maximum Clock Frequency | 100 kHz | — |
| Operating Supply Range | 2.5 V to 6 V VCC | — |
| Product-Page Supply Range | 2.5 V to 5.5 V | — |
| Antarmuka | I2C two-line bidirectional bus | I2C / SMBus |
| Port Architecture | Quasi-bidirectional I/O | — |
| Interrupt Output | Open-drain | Yes |
| Standby Current | 10 µA maximum | [DATA_NEEDED: standby current] |
| Paket | 16-SOIC | 16-TSSOP |
| Jumlah Pin | 16 pins | 16 pins |
| Tipe Mounting | Surface mount | Surface mount |
| Application Category | I/O expander | — |
| Bus | I2C/SMBus | — |
| Port Names | P0 through P7 | — |
| Manufacturer | Texas Instruments | — |
| Compliance Information | [DATA_NEEDED: RoHS status] | — |
| Suhu Kerja | [DATA_NEEDED: operating temperature range] | — |
| Device Type | — | 8-bit I/O expander |
| I/O Port Count | — | 8 ports |
| Supply Voltage Range | — | 1.65 V to 5.5 V |
| Maximum I2C Bus Frequency | — | 400 kHz |
| Configuration Registers | — | Yes |
| Weak Pull-Up Configuration | — | Yes |
| Address Inputs | — | A0, A1, A2 |
| Maximum Devices Per Bus | — | 8 devices |
| Reset Behavior | — | Power-on reset to default state |
| Input Port Function | — | 8-bit general-purpose input |
| Output Port Function | — | 8-bit general-purpose output |
| Rentang Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |
| Output Current per Port | — | [DATA_NEEDED: output current per port] |
| Status RoHS | — | [DATA_NEEDED: RoHS status] |