PCM1795DBR vs PCM1792DBR Perbandingan
Perbandingan bersamaan detil PCM1795DBR dari Texas Instruments dan PCM1792DBR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | PCM1795DBR | PCM1792DBR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | ADC/DAC | ADC/DAC |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Stereo audio digital-to-analog converter (DAC) | Stereo digital-to-analog converter |
| DAC Resolution | 32 bit | — |
| Number of DAC Channels | 2 channels | — |
| Maximum Sampling Rate | 200 kHz | 192kHz |
| Nominal PCM Sampling Rate | 192 kHz | — |
| DSD Playback Support | Up to 200 kHz | — |
| DAC Architecture | Advanced segment | Advanced segment DAC |
| Analog Outputs | 2 balanced current outputs | — |
| Digital Control Interfaces | I2C, SPI, and TDMCA | — |
| Typical Signal-to-Noise Ratio | 123 dB | — |
| Typical Common-Mode Rejection | 123 dB | — |
| Analog Supply Voltage | 5 V for VCC1, VCC2L, and VCC2R | — |
| Digital Supply Voltage | 3.3 V for VDD | — |
| Manufacturer Test Sampling Rate | 48 kHz | — |
| Manufacturer Test System Clock | 256 fS | — |
| Manufacturer Test Data Width | 32 bit | — |
| Paket | 28-pin SSOP | 28-lead SSOP |
| Device Technology | CMOS monolithic integrated circuit | — |
| Tipe Mounting | Surface mount | — |
| Resolusi | — | 24 bit |
| Dynamic Range, 9Vrms Mono | — | 132dB |
| Dynamic Range, 4.5Vrms Stereo | — | 129dB |
| Dynamic Range, 2Vrms Stereo | — | 127dB |
| THD+N | — | 0.0004% |
| Differential Output Current | — | 7.8mA peak-to-peak |
| Digital Oversampling | — | 8 times |
| Output Architecture | — | Balanced differential current output |
| Suhu Kerja | — | -25C to +85C |
| Digital Audio Interface | — | PCM audio data interface |
| DSD Support | — | Supported |
| Sampling Control | — | Software control |
| Status RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |