SN65HVD234QDRQ1 vs SN65HVD230QDRQ1 Perbandingan
Perbandingan bersamaan detil SN65HVD234QDRQ1 dari Texas Instruments dan SN65HVD230QDRQ1 dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
SN65HVD234QDRQ1 - 3.3V Automotive CAN Transceiver | Texas Instruments
SN65HVD234QDRQ1 ✓ AktifTexas Instruments
SN65HVD230QDRQ1 - 3.3V CAN Transceiver AEC-Q100 | Texas Instruments
SN65HVD230QDRQ1 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | SN65HVD234QDRQ1 | SN65HVD230QDRQ1 |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Harga Unit (USD) | — | $1,11 |
| Fungsi | Half CANbus Transceiver (Driver + Receiver) | — |
| Supply Voltage Min | 3 V | — |
| Supply Voltage Max | 3.6 V | — |
| Operating Supply Current | 6 mA | — |
| Laju Data | 1 Mbps | Up to 1 Mbps |
| Sleep Mode | Yes (ultralow-current via EN pin, low level on pin 5) | — |
| Autobaud Loopback | Yes (internal TXD to RS pin loopback) | — |
| Automotive Qualification | AEC-Q100 (Q1) | — |
| Operating Temperature Max | +125 C | — |
| Paket | 8-SOIC (D) | 8-SOIC (D), 3.90 mm width |
| Tipe Mounting | Surface Mount | Surface Mount |
| Protocol | CAN (ISO 11898 physical layer) | — |
| Number of Drivers / Receivers | 1 / 1 | — |
| Status RoHS | Compliant | — |
| Reel Quantity | [DATA_NEEDED: reel quantity] | — |
| Transceiver Type | — | CAN (Half-duplex, 1 driver / 1 receiver) |
| Tegangan Pemuat | — | 3.3 V |
| Standby Mode Current | — | 370 uA (typical) |
| Bus Pin ESD Protection | — | Exceeds 15 kV HBM |
| Device ESD Rating | — | Exceeds 2000 V per MIL-STD-883 |
| Protocol Compatibility | — | ISO 11898-2 High Speed CAN Physical Layer |
| Standby Mode | — | Yes (RS pin controlled) |
| Dominant Timeout | — | Yes |
| Slew Rate Control | — | Yes (RS pin) |
| Unpowered Node Behavior | — | Does not disturb the bus |
| Rentang Suhu Kerja | — | -40C to +125C |
| AEC-Q100 Qualification | — | Qualified (Automotive Catalog) |
| Packaging | — | Tape & Reel (DR) |