SN65HVD51D vs SN65HVD52D Perbandingan
Perbandingan bersamaan detil SN65HVD51D dari Texas Instruments dan SN65HVD52D dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
SN65HVD51D - 5Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD51D ✓ AktifTexas Instruments
SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD52D ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | SN65HVD51D | SN65HVD52D |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | RS-422/RS-485 full-duplex transceiver | RS-485 / RS-422 full-duplex transceiver |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Maximum Signaling Rate | 5 Mbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Interface Standards | RS-422 and RS-485 | — |
| Duplex Mode | Full-duplex | — |
| Receiver Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | Up to 256 nodes | Up to 256 nodes |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | Exceeds 15 kV HBM |
| Available Driver Transition Rates | 1 Mbps, 5 Mbps, and 25 Mbps | — |
| Standby Current | Less than 1 µA | 1 uA |
| Rentang Suhu Kerja | -40 °C to 85 °C | — |
| Paket | 8-pin SOIC (D) | 8-pin SOIC (D) |
| Tipe Mounting | Surface mount | Surface mount |
| Enable Architecture | Fully enabled; no external enable pins | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH compliance status] |
| Driver / Receiver Count | — | 1 driver and 1 receiver |
| Laju Data | — | 1 Mbps |
| Tegangan Pemuat | — | 5 V |
| Maximum Supply Voltage | — | 5.5 V |
| Suhu Kerja | — | -40 C to +85 C |
| Driver Configuration | — | Full-duplex |
| Bus Standard | — | RS-485 and RS-422 |
| Unit Load | — | 1/8 unit-load option |
| Maximum Transmit Delay | — | 230 ns |
| Maximum Supply Current | — | 8 mA |
| Interface Standard | — | EIA-485-A |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |