TLV2450ID vs TLV2451ID Perbandingan
Perbandingan bersamaan detil TLV2450ID dari Texas Instruments dan TLV2451ID dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | TLV2450ID | TLV2451ID |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Single general-purpose operational amplifier | Single operational amplifier |
| Number of Channels | 1 channel | — |
| Gain-Bandwidth Product | 220 kHz | 220 kHz |
| Supply Current per Channel | 23 µA typical | — |
| Maximum Supply Voltage | 6 V | — |
| Input Common-Mode Range | Rail-to-rail input | Rail-to-rail |
| Output Swing | Rail-to-rail output | Rail-to-rail |
| Input Offset Voltage | 20 µV typical | [DATA_NEEDED: input offset voltage] |
| Output Drive Capability | ±10 mA | — |
| Shutdown Control | Yes | — |
| Paket | 8-pin SOIC | 8-pin SOIC |
| Jumlah Pin | 8 pins | — |
| Tipe Mounting | Surface mount | Surface mount |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free Status | Yes | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Tegangan Pemuat | — | 6 V |
| Arus Memerintah | — | 23 µA per channel |
| Number of Amplifiers | — | 1 |
| Product Category | — | General-purpose operational amplifier |
| Shutdown Capability | — | Available in the TLV245x family; TLV2451-specific status requires datasheet confirmation |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Output Current | — | [DATA_NEEDED: output current] |
| Noise Voltage Density | — | [DATA_NEEDED: noise voltage density] |