TLV272CD vs TLV272ID Perbandingan
Perbandingan bersamaan detil TLV272CD dari Texas Instruments dan TLV272ID dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | TLV272CD | TLV272ID |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Number of Channels | 2 channels | — |
| Maximum Supply Voltage | 16 V | 16 V |
| Tegangan Pemuat Kerja | 2.7 V to 16 V | — |
| Gain-Bandwidth Product | 3 MHz | 3 MHz |
| Slew Rate | 2.4 V/us | [DATA_NEEDED: slew rate] |
| Arus Pemuat | 550 uA/channel | — |
| Input Noise Voltage Density | 39 nV/Hz | — |
| Input Bias Current | 1 pA specified | [DATA_NEEDED: input bias current] |
| Tipe Output | Rail-to-rail output | — |
| Rentang Suhu Kerja | -40C to +125C | -40 C to +125 C |
| Paket | 8-SOIC | 8-pin SOIC (D) |
| Tipe Mounting | Surface Mount | Surface mount |
| Product Type | Dual operational amplifier | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Output Swing | [DATA_NEEDED: output swing] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Amplifier Type | — | Dual operational amplifier |
| Operational-Amplifier Channels | — | 2 channels |
| Minimum Operating Supply Voltage | — | 2.7 V |
| Supply Current per Channel | — | 550 uA typical |
| Output Architecture | — | Rail-to-rail output |
| Jumlah Pin | — | 8 pins |
| Product Classification | — | Standard general-purpose amplifier |
| Lead Time | — | 3-7 business days |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Current | — | [DATA_NEEDED: output current] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |