TS3702IN vs TS3702CN Perbandingan
Perbandingan bersamaan detil TS3702IN dari STMicroelectronics dan TS3702CN dari STMicroelectronics. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | TS3702IN | TS3702CN |
|---|---|---|
| Merek | STMicroelectronics | STMicroelectronics |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | Dual general-purpose voltage comparator | General-purpose voltage comparator |
| Number of Channels | 2 channels | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Maximum Supply Voltage | 16 V | — |
| Typical Supply Current | 9 µA per comparator | — |
| Input Offset Voltage | 6.5 mV maximum | 6.5 mV maximum |
| Response Time | 1.5 µs maximum | 1.5 µs maximum |
| Input Bias Current | 600 pA maximum | — |
| Tipe Output | Push-pull CMOS | CMOS push-pull |
| Logic Technology | CMOS | — |
| Independent Comparators | 2 independent channels | — |
| Paket | PDIP-8, 8-pin through-hole | 8-pin DIP |
| Tipe Mounting | Through-hole | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input range] | — |
| Rentang Tegangan Output | [DATA_NEEDED: output voltage range] | — |
| Input Pin Count | 5 inputs, including 2 ground pins | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Comparators | — | 2 channels |
| Supply Current per Comparator | — | 9 µA typical |
| Logic Family | — | CMOS |
| Dual-Supply Voltage Range | — | ±1.35 V to ±8 V |
| Typical Dual-Supply Configurations | — | ±3 V or ±5 V |
| Maximum Power Dissipation | — | 1250 mW |
| Jumlah Pin | — | 8 pins |
| Gaya Mounting | — | Through-hole |
| External Pull-Up Resistor | — | Not required for push-pull output |
| Comparator Consumption Advantage | — | 20 times lower than bipolar LM393 according to the manufacturer |