TS951ID vs TS954ID Perbandingan
Perbandingan bersamaan detil TS951ID dari STMicroelectronics dan TS954ID dari STMicroelectronics. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
STMicroelectronics
TS951ID - 3MHz Rail-to-Rail Low-Power Op Amp | STMicroelectronics
TS951ID ✓ Aktif
Perbandingan Spesifikasi
| Parameter Umum | TS951ID | TS954ID |
|---|---|---|
| Merek | STMicroelectronics | STMicroelectronics |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Single rail-to-rail operational amplifier | General-purpose operational amplifier |
| Process Technology | BiCMOS | — |
| Number of Circuits | 1 circuit | — |
| Optimized Supply Voltage | 3 V and 5 V | 3 V or 5 V |
| Maximum Operating Supply Voltage | 12 V | — |
| Gain-Bandwidth Product | 3 MHz | 3 MHz |
| Slew Rate | 1 V/µs | 1 V/µs |
| Supply Voltage Rejection Ratio | 80 dB | — |
| Input Common-Mode Range | Rail to rail | [DATA_NEEDED: input common-mode range] |
| Output Voltage Swing | Rail to rail | [DATA_NEEDED: output voltage swing] |
| ESD Protection | 2 kV | — |
| Low-Consumption Operation | Specified at 3 V | — |
| Paket | 8-pin SOIC | 14-pin SOIC |
| Tipe Mounting | Surface Mount | Surface mount |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Arus Memerintah | [DATA_NEEDED: quiescent current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | 35 nA |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | [DATA_NEEDED: open-loop gain] |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Number of Channels | — | 4 channels |
| Topologi | — | Rail-to-rail BiCMOS |
| Tipe Output | — | Rail-to-rail |
| Supply Voltage Range | — | 2.7 V to 12 V |
| Arus Pemuat | — | 950 µA per channel |
| REACH Status | — | [DATA_NEEDED: REACH status] |