A3P015-QNG68I - 15K Gate 231MHz FPGA | Microchip
MPN: A3P015-QNG68I ✗ Akhir HidupA3P015-QNG68I Ringkasan
A ProASIC3 FPGA is a reprogrammable semiconductor that combines configurable logic blocks, programmable interconnect, user I/O, and embedded memory in one device. It belongs to the FPGA and CPLD hierarchy and provides a bridge between fixed-function logic and larger mask-programmable devices. The A3P015-QNG68I implements digital functions through configuration data rather than a fixed circuit mask, allowing design revisions and field updates without changing the PCB.
The device provides 15,000 equivalent gates, 384 logic cells or logic array blocks, 231 MHz internal operating frequency, and up to 144 kbits of true dual-port SRAM according to the family documentation. Its 49 user I/Os support mixed interface requirements, while the 1.5 V core voltage and 130 nm CMOS process provide a useful balance between performance, programmable capacity, and power consumption.
The ProASIC3 architecture combines flash-based configuration with a SeaGate architecture and user-programmable logic. Flash configuration allows the FPGA to retain its programmed logic without a separate external configuration PROM. Available I/O resources can support communications, control, data acquisition, and general digital interfacing, but each high-speed interface must be checked against the device's speed grade, voltage requirements, and pin constraints.
Typical applications include industrial automation, embedded control, communications infrastructure, test equipment, and compact embedded systems requiring a moderate amount of parallel logic. The 68-pin package also suits boards with constrained space, although the exposed pad requires careful thermal and assembly planning. Because the 231 MHz figure is an internal fabric limit, externally connected interface performance remains dependent on I/O timing, routing, and the selected clocking scheme.
For PCB implementation, provide a continuous ground-plane reference under the exposed pad and a low-impedance power-distribution network for the 1.5 V core. Follow the manufacturer's footprint and exposed-pad soldering guidance, and test signal integrity for high-speed external interfaces. The industrial temperature suffix I should be confirmed against the end-product environmental requirements before production release.
This product page combines the verified family specifications with practical FPGA design guidance, package constraints, programming considerations, and same-footprint replacement analysis. It is intended to help engineers identify whether the A3P015-QNG68I matches the required logic capacity, timing, I/O count, thermal environment, and board layout.
Alternatif penggantian untuk A3P015-QNG68I — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian A3P015-QNG68I (sama faktor bentuk dan footprint) — berbeda di dalam Device Type, Process Technology, Package Dimensions, Configuration Memory, Core Supply Voltage.
A3PN015-QNG68I
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
A3P015-QNG68
✅ Drop-InKontak untuk harga
Lihat Datasheet →A3P015-1QNG68I
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
A3P015-QNG68PS32
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
A3P015-QNG68II
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
A3P015-QNG68I Rating Maksimal & Karakteristik Listrik
| Device Type | Flash-based FPGA |
| FPGA Family | ProASIC3 |
| System Gates | 15,000 gates |
| Logic Cells | 384 logic cells |
| Maximum Internal Frequency | 231 MHz |
| User I/O Count | 49 I/Os |
| Core Supply Voltage | 1.5 V |
| Process Technology | 130 nm CMOS |
| Configuration Memory | Flash |
| Embedded SRAM | Up to 144 kbits true dual-port SRAM |
| Paket | 68-pin VFQFN with exposed pad |
| Package Dimensions | 8 mm x 8 mm, 0.90 mm height |
| Package Pitch | 0.40 mm |
| Surface Mounting | Yes |
| Suhu Kerja | -40 °C to +100 °C (TJ) |
| Logic Family | CMOS |
| Jumlah Pin | 68 pins |
| Status RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
A3P015-QNG68I 0.40 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk A3P015-QNG68I (0.40 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk A3P015-QNG68I.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
A3P015-QNG68I cocok untuk 6 aplikasis: Industrial Automation Controllers, Communications Interface Consolidation, Embedded Data Acquisition, Test and Measurement Equipment, Programmable Control Logic, Compact Embedded Systems.
Industrial Automation Controllers
The A3P015-QNG68I fits compact industrial automation logic because it combines 15,000 system gates, 384 logic cells, and 49 user I/Os with flash-retained configuration. It can implement sequencing, state-machine, interlock, and signal-conditioning functions alongside a host processor. The 231 MHz internal performance class provides timing headroom for parallel control logic, while the 1.5 V core supports compact board-level integration. The -40 °C to +100 °C junction-temperature marking is appropriate for industrial environments when the surrounding enclosure and heat dissipation meet system requirements.
Direkomendasikan
Communications Interface Consolidation
The A3P015-QNG68I can consolidate protocol conversion, framing, FIFO, and data-routing logic into a compact 68-pin package. Its 49 I/Os provide sufficient parallel connectivity for multi-bit buses and control channels, while the internal fabric is rated up to 231 MHz for clocked logic. Flash configuration supports firmware evolution without an external configuration PROM. Actual line-rate performance depends on the selected I/O standard, clock topology, board-level signal integrity, and timing closure, so communications interfaces should be validated at the target data rate.
Direkomendasikan
Embedded Data Acquisition
The A3P015-QNG68I is suitable for embedded acquisition systems that need parallel digital controls, sampling coordination, buffering, and programmable signal routing. Its 384 logic cells and up to 144 kbits of true dual-port SRAM allow acquisition control and local storage to share one programmable-logic device. The 231 MHz internal performance class supports demanding clocked operations, while 49 I/Os can connect sensors, converters, and test points. System timing must be budgeted from the external interface requirement rather than assuming the fabric frequency directly sets the acquisition rate.
Direkomendasikan
Test and Measurement Equipment
The A3P015-QNG68I can implement timing control, pattern generation, instrument arbitration, and front-panel logic in a compact test system. Flash configuration allows stored test sequences and hardware revisions to be updated without relocating the device, and the 49 I/Os support parallel control and measurement channels. The 231 MHz internal rating gives designers a substantial timing resource for multicycle clock domains, although instrument timing accuracy remains dependent on external references, I/O delay, and calibration. Use synchronous design practices and characterize every critical measurement path.
Direkomendasikan
Programmable Control Logic
The A3P015-QNG68I is well suited to programmable control logic where field updates, multi-function sequencing, and compact integration matter more than very large FPGA capacity. The ProASIC3 architecture provides 15,000 system gates and 384 logic cells in a 68-pin exposed-pad QFN, allowing designers to consolidate discrete controllers and glue logic. Its industrial temperature marking supports controlled industrial environments, while the 1.5 V core requires a clean power supply. The design should include configuration-management procedures so field updates remain traceable and reversible.
Direkomendasikan
Compact Embedded Systems
The A3P015-QNG68I can serve as an autonomous logic engine inside compact embedded systems, implementing boot control, watchdog functions, peripheral arbitration, or dedicated signal processing. Flash configuration preserves the design after power removal, and the 68-pin package limits board footprint compared with many larger FPGAs. The device offers 49 user I/Os and a 231 MHz internal performance class, but the exposed pad requires uninterrupted copper for electrical and thermal performance. System partitioning should reserve enough I/O and logic for expansion while avoiding assumptions that the package supports every high-speed interface automatically.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk A3P015-QNG68I — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
A3PN015-QNG68I is the closest same-footprint candidate when its exact speed grade and programming requirements satisfy the design. A3P015-QNG68 is appropriate only when its non-I temperature grade meets the operating environment. A3P015-1QNG68I and A3P015-QNG68PS32 should be selected only after their ordering-code differences have been reconciled with the required timing and configuration setup. No verified cross-brand drop-in replacement was established; changing FPGA vendors would require a full footprint, resource, timing, toolchain, and configuration migration rather than a simple component substitution.
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | A3PN015-QNG68I | A3P015-QNG68 | A3P015-1QNG68I | A3P015-QNG68PS32 | A3P015-QNG68II |
|---|---|---|---|---|---|---|
| Package | 68-pin VFQFN exposed pad | 68-pin QFN exposed pad | 68-pin QFN exposed pad | 68-pin QFN exposed pad | 68-pin QFN exposed pad | 68-pin QFN exposed pad |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| FPGA Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 |
| System Gates | 15,000 gates | 15,000 gates | 15,000 gates | 15,000 gates | 15,000 gates | 15,000 gates |
| Logic Cells | 384 logic cells | 384 logic cells | 384 logic cells | 384 logic cells | 384 logic cells | 384 logic cells |
| User I/O Count | 49 I/Os | 49 I/Os | 49 I/Os | 49 I/Os | 49 I/Os | 49 I/Os |
| Core Supply Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Process Technology | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS |
| Configuration Memory | Flash | Flash | Flash | Flash | Flash | Flash |
Diferensiator Kunci
- Closest same-footprint ordering candidate (vsA3PN015-QNG68I)
- Industrial ordering option (vsA3P015-QNG68)
- Consistent high-speed internal fabric class (vsA3P015-1QNG68I)
- Flash-based configuration across matching family orderings (vsA3P015-QNG68PS32)
Catatan Desain
The 68-pin VFQFN exposed pad is part of the electrical and thermal design. Place a full thermal-via array or equivalent heat-spreader structure beneath the pad and connect it to the board ground plane according to the package drawing. Keep dense switching or high-current circuitry away from the device's core-supply region. Use the manufacturer's maximum junction-temperature rating and the application's worst-case ambient temperature to determine whether additional airflow, copper area, or thermal spreading is required.
Follow the exact A3P015-QNG68I land pattern rather than a generic 68-pin QFN footprint. Confirm exposed-pad dimensions, solder-mask definition, paste apertures, and the number of thermal vias against the current package drawing. Place configuration, clock, and decoupling connections so that high-current return paths do not cross the sensitive core-supply region. A short, symmetrical clock route helps reduce skew between related logic domains.
Use a low-impedance 1.5 V core-supply network with local bulk and high-frequency decoupling placed close to the device's power and ground terminals. Check the exact ordering code's supply limits and current requirements before selecting capacitors or regulators. Avoid routing noisy external signals beneath the exposed pad, and maintain a continuous return path for every switching current. Validate startup, current transients, and power sequencing across the full temperature range.
The 231 MHz rating describes internal fabric performance and does not guarantee 231 MHz operation on every user I/O. For external clocks or high-speed buses, check the applicable I/O timing, drive strength, loading, and PCB topology. Use controlled-impedance routing where required, minimize stubs and test-point discontinuities, and reserve series damping locations for edge-rate control. Perform corner-case timing analysis rather than relying on the nominal frequency alone.
Do not treat A3P015-QNG68 and A3P015-QNG68I as automatically interchangeable without reviewing the ordering-code temperature grade. Likewise, an A3PN designation can indicate a different performance class even when the footprint and logic resources match. Verify the exact speed grade, junction-temperature limits, configuration protocol, programming software support, and package drawing for every proposed substitution before releasing a PCB or production order.
Informasi Konformitas
The available product information identifies the A3P015-QNG68I as an industrial-temperature ProASIC3 FPGA but does not provide current compliance declarations. Obtain RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation from Microchip for the exact ordering code.