A3PN010-QNG48 - 10K Gate 1.5V FPGA | Microchip Technology
MPN: A3PN010-QNG48 ✓ AktifA3PN010-QNG48 Ringkasan
A programmable FPGA is a semiconductor whose digital logic, routing, and I/O can be configured after manufacture. Within the product hierarchy, this device is a flash-based FPGA, which belongs to the broader family of programmable logic devices and provides an alternative to mask-programmed custom silicon when designs must change during development. The A3PN010 combines that field-programmable architecture with a security-oriented single-chip configuration approach described for the ProASIC3 nano family.
Key features include 10,000 system gates, 260 configurable logic blocks, a 1.425 V to 1.575 V core operating range, and 34 user I/O positions in a compact surface-mount package. The manufacturer highlights low power consumption, hot-swap capability, and Schmitt-trigger inputs as useful features for cost-sensitive, portable, and battery-backed equipment. Flash configuration allows the programmed logic image to be retained without a separate configuration PROM.
The A3PN010 uses 130 nm CMOS process technology and supports mixed-voltage I/O operation within the limits defined for its 1.5 V core configuration. Its compact package and exposed thermal pad support high-density board placement, but thermal design and exposed-pad soldering remain essential because concentrated core activity can raise junction temperature. The device is designed for applications where a modest logic capacity is sufficient but programmable post-build changes are valuable.
Typical uses include industrial control modules, compact communications equipment, sensor interfaces, consumer appliances, security systems, and battery-powered accessories. In these systems, the FPGA can consolidate control logic, interface adaptation, and timing functions into one device while reducing the number of discrete components required on a two-layer board.
For a new PCB, follow the pin-description and layout guidance in the manufacturer datasheet, provide the specified core and I/O supply decoupling, and connect the exposed pad to the recommended ground plane. Confirm speed-grade and temperature-grade requirements before substituting a related A3PN010 order code.
This page consolidates the manufacturer family information, verified package and logic-density details, drop-in alternatives within the A3PN010 series, and application-specific design guidance for engineers who need more context than a distributor parameter table provides.
Alternatif penggantian untuk A3PN010-QNG48 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
A3PN010-1QNG48I
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
A3PN010-QNG48I
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
A3PN010-1QNG48
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
A3PN010-2QNG48
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
A3PN010-3QNG48
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
A3PN010-QNG48 Rating Maksimal & Karakteristik Listrik
| Product Type | Flash-based Field-Programmable Gate Array (FPGA) |
| FPGA Family | ProASIC3 nano |
| System Gates | 10,000 gates |
| Configurable Logic Blocks | 260 CLBs |
| User I/O | 34 I/O |
| Core Supply Voltage | 1.5 V nominal |
| Core Supply Operating Range | 1.425 V to 1.575 V |
| Process Technology | 130 nm CMOS |
| Paket | 48-pin QFN with exposed pad, 6 mm x 6 mm, 0.40 mm pitch |
| Tipe Mounting | Surface mount |
| Configuration Memory | Embedded flash |
| I/O Features | Bank-selectable mixed-voltage operation and Schmitt-trigger inputs |
| Low-Power Features | Low power consumption design |
| Hot-Swap Capability | Supported |
| PCB Layer Target | Two-layer PCB designs |
| Product Status | Active |
A3PN010-QNG48 48-pin qfn with exposed pad, 6 mm x 6 mm, 0.40 mm pitch Diamant Konfigurasi Panduan
Konfigurasi pin untuk A3PN010-QNG48 (48-pin qfn with exposed pad, 6 mm x 6 mm, 0.40 mm pitch pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk A3PN010-QNG48.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
A3PN010-QNG48 cocok untuk 6 aplikasis: Industrial Control and Automation, Compact Communications Interface, Battery-Powered Portable Device, Sensor and Measurement Hub, Consumer Appliance Control, Security and Access-Control Module.
Industrial Control and Automation
The A3PN010-QNG48 fits compact industrial control modules that require programmable logic alongside modest external I/O. Its 260 configurable logic blocks and 34 user I/Os can implement sequencing, interlocks, signal conditioning, and protocol adaptation without a separate microcontroller. The 1.5 V core supply and bank-selectable mixed-voltage I/O simplify connections to 2.5 V and 3.3 V peripherals when those interfaces are supported by the selected bank configuration. Embedded flash retains the programmed logic image, which is useful for field-updatable controllers. The compact 48-pin QFN EP package also preserves board space, although the exposed pad requires a proper thermal land and the logic budget must be checked before adding multiple communications channels.
Direkomendasikan
Compact Communications Interface
The A3PN010-QNG48 is appropriate for low-to-moderate-rate interface logic in communications equipment, including protocol converters, data routers, and status controllers. Its 10,000 system gates provide enough parallel logic for framing, filtering, and control functions, while 34 user I/Os offer practical connectivity for data and handshake signals. The ProASIC3 nano architecture is specifically positioned for compact systems and two-layer PCB construction, allowing control logic to be integrated close to a connector or transceiver. Low power consumption and hot-swap capability can help designers meet energy and serviceability goals. Designers should use the manufacturer pin table to confirm that the required clock, serial interface, and I/O standards are available in the chosen A3PN010 speed and temperature grade.
Direkomendasikan
Battery-Powered Portable Device
The A3PN010-QNG48 can serve as the programmable control element in a battery-backed accessory where space and standby power are important. Its low-power design features, embedded flash configuration, and 130 nm CMOS implementation support compact products that need retained configuration without a separate PROM. The device can manage sensor sampling, button handling, low-speed data formatting, and power-state sequencing within its 260 configurable logic blocks. The 34 I/Os provide mixed-voltage connectivity to external sensors and radios, subject to the bank's permitted operating range. Because dynamic power depends on the implemented logic and switching activity, prototype measurements should include realistic workload conditions rather than relying only on the nominal supply voltage.
Direkomendasikan
Sensor and Measurement Hub
The A3PN010-QNG48 is useful in sensor aggregation and measurement modules that must combine multiple inputs with deterministic control logic. Schmitt-trigger inputs can improve noise tolerance on digital sensing lines, while configurable logic blocks can perform debouncing, filtering, scaling, and alarm handling. The 34 user I/Os allow several sensors, switches, and status indicators to share one controller when the board does not require high-speed differential interfaces. A 1.5 V core supply leaves the design relatively simple to power, and the embedded flash configuration supports field updates. Engineers should use the datasheet's I/O standards to confirm input thresholds and output-drive capabilities, then apply the recommended supply decoupling close to the package pins.
Direkomendasikan
Consumer Appliance Control
The A3PN010-QNG48 can consolidate appliance control functions in a compact consumer product where a dedicated ASIC is not yet justified. It can implement motor sequencing, display logic, button debouncing, and simple peripheral supervision within its 10,000-system-gate capacity. Flash configuration allows firmware-like logic revisions during production, while the 48-pin QFN EP package supports dense two-layer layouts. The A3PN010's Schmitt-trigger inputs and bank-selectable mixed-voltage I/O are useful when connecting switches, displays, and external modules that operate at different logic levels within permitted bank limits. The exposed pad must be connected to a thermal and electrical ground plane as specified, and unused inputs should be tied to defined levels according to the manufacturer guidance.
Direkomendasikan
Security and Access-Control Module
The A3PN010-QNG48 is suitable for embedded security and access-control logic where a single programmable device can coordinate sensors, relays, communication, and status indicators. The ProASIC3 nano family is positioned around secure, low-power, single-chip implementations, while embedded flash avoids a separate serial configuration memory in suitable designs. Its 260 configurable logic blocks can implement state machines, credential-handling interfaces, event logging control, and anti-tamper response logic. The 34 user I/Os are adequate for peripheral multiplexing but must be allocated carefully to avoid exceeding simultaneous high-rate or voltage-specific requirements. For powered access systems, choose the A3PN010 grade that covers the enclosure temperature range and implement watchdog or fail-safe behavior in the programmed logic.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk A3PN010-QNG48 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | A3PN010-1QNG48I | A3PN010-QNG48I | A3PN010-1QNG48 | A3PN010-2QNG48 | A3PN010-3QNG48 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-pin QFN with exposed pad | 48-pin QFN with exposed pad - same footprint | 48-pin QFN with exposed pad - same footprint | 48-pin QFN with exposed pad - same footprint | 48-pin QFN with exposed pad - same footprint | 48-pin QFN with exposed pad - same footprint |
| FPGA Family | ProASIC3 nano | ProASIC3 nano | ProASIC3 nano | ProASIC3 nano | ProASIC3 nano | ProASIC3 nano |
| System Gates | 10,000 gates | 10,000 gates | 10,000 gates | 10,000 gates | 10,000 gates | 10,000 gates |
| Core Supply Voltage | 1.5 V nominal; 1.425 V to 1.575 V operating range | 1.5 V nominal; 1.425 V to 1.575 V operating range | 1.5 V nominal; 1.425 V to 1.575 V operating range | 1.5 V nominal; 1.425 V to 1.575 V operating range | 1.5 V nominal; 1.425 V to 1.575 V operating range | 1.5 V nominal |
| Process Technology | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS |
| Configuration Memory | Embedded flash | Embedded flash | Embedded flash | Embedded flash | Embedded flash | Embedded flash |
| Temperature and Speed Grade | Standard A3PN010 grade | -1 speed grade with industrial-temperature designation | Industrial-temperature designation | -1 speed grade | -2 speed grade | -3 speed grade |
Diferensiator Kunci
- Directly compatible A3PN010 family alternatives (vsA3PN010-1QNG48I)
- Compact 10,000-gate density with 34 user I/Os (vsA3PN010-2QNG48)
- Embedded flash configuration in a space-conscious package (vsA3PN010-QNG48I)
- Mixed-voltage I/O support for compact mixed-signal boards (vsA3PN010-1QNG48)
Catatan Desain
The 48-pin QFN EP package requires a continuous exposed-pad land connected to the recommended ground plane. Place thermal vias in the pad area only when doing so does not interfere with assembly tolerances or the manufacturer's land pattern. Keep the core supply trace short and place its decoupling capacitor close to the supply pin. Because the A3PN010-QNG48 uses a 1.5 V core, inadequate decoupling or a high-impedance ground path can produce unstable behavior that resembles a logic-design fault.
Use the manufacturer pin-description table and recommended footprint rather than assigning signals from package position alone. The device supports bank-selectable mixed-voltage I/O, so each external interface must be checked against the voltage, drive-strength, and input-threshold limits of its assigned bank. Place decoupling capacitors at the pins, keep configuration and programming access routes away from sensitive analog or high-speed nets, and follow the exposed-pad soldering profile for lead-free assembly.
Do not treat every A3PN010 order code as electrically and commercially identical. Suffixes can identify speed grade, temperature range, and packaging options. Verify the required operating temperature, timing margin, and delivery format before substitution. Also avoid selecting this 10,000-gate device for workloads that exceed its 260 configurable logic blocks, and review the I/O count against the board's connector requirements rather than assuming every exposed pad position is a user signal.
Decouple the 1.5 V core rail according to the datasheet's recommended network and route it as a compact distribution path. The A3PN010's low-power characteristics depend on the implemented logic, selected speed grade, and I/O switching activity, so calculate the power budget from both static and dynamic conditions. For battery-powered designs, measure the real workload rather than relying on a nominal quiescent figure, and keep optional I/O at defined levels to prevent unintended toggling.
Informasi Konformitas
The manufacturer documentation confirms the ProASIC3 nano family, 130 nm CMOS process, 48-pin QFN EP package, low-power features, hot-swap capability, and Schmitt-trigger inputs. Specific RoHS, REACH, halogen-free, and conflict-minerals declarations are not stated in the available listings.