Analog Devices

AD741LN/+ Precision Op Amp, 0.5mV VOS | Analog Devices

MPN: AD741LN/+ ✓ Aktif
0.5 mV max (L grade) Vdss 50 nA max (L grade) Id 8-pin SOIC, lead-free Package
MOQ: 1 |

AD741LN/+ Ringkasan

The Analog Devices AD741LN/+ is a precision-grade, internally compensated monolithic operational amplifier with a maximum input offset voltage of 0.5 mV and maximum offset-voltage drift of 5 uV/degC. The L-grade device also limits input bias current to 50 nA, input offset current to 5 nA, and guarantees a minimum common-mode rejection ratio of 90 dB. It is supplied in the AD741LN/+ 8-pin SOIC package and operates from dual supply voltages of at least 10 V.

An operational amplifier is an active analog signal-conditioning device that amplifies the difference between its inverting and non-inverting inputs. Its place in the electronics hierarchy is operational amplifier, analog amplifier, amplifier IC, and integrated circuit. The AD741 series occupies the general-purpose precision-amplifier segment, providing greater input accuracy than the standard AD741C while retaining the familiar 8-pin pinout and straightforward implementation.

The AD741LN/+ combines low offset voltage, low offset drift, low bias current, and high CMRR with a minimum open-loop gain of 25,000 into a 1 kOhm load. Internal compensation removes the need for an external compensation network, and integrated short-circuit protection improves robustness in feedback-controlled signal chains. These characteristics make the device suitable for instrumentation, sensor amplification, active filtering, and precision analog control systems.

The AD741LN/+ is a selected precision version of the standard AD741 amplifier. Analog Devices identifies the AD741J, AD741K, AD741L, and AD741S as specially tested and selected versions, with improved processing and additional electrical testing intended to guarantee precision performance at low cost. The L grade is therefore the appropriate choice when offset voltage and drift dominate the measurement error rather than bandwidth or output-current capability.

Typical circuits include low-level sensor amplifiers, current-to-voltage converters, active filters, and buffered reference stages. Because the amplifier is internally compensated and requires no external equalization, the implementation remains straightforward: connect the feedback network to the inverting input, apply the source signal to the non-inverting input, and bypass the positive supply pin close to the package.

When designing around the AD741LN/+, verify the supply-voltage limits and common-mode input range in the manufacturer datasheet. Decouple the positive supply rail with a short, low-inductance trace to the bypass capacitor. Because input bias current is specified at 50 nA maximum for the L grade, use high-value feedback resistors only when their generated offset error remains acceptable for the target measurement accuracy.

Alternatif penggantian untuk AD741LN/+ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

AD741K/+

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 SOIC-8
K-grade selection with the same 90 dB minimum CMRR as the L grade, but different guaranteed offset and drift limits

📋 Alternatif referensi (tidak dalam katalog)

AD741J/+

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 SOIC-8
J-grade precision selection in the same AD741 8-pin SOIC architecture with different offset limits

📋 Alternatif referensi (tidak dalam katalog)

AD741S/+

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 SOIC-8
S-grade selected version with the same family pinout but different guaranteed precision and temperature characteristics

📋 Alternatif referensi (tidak dalam katalog)

AD741C/+

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 SOIC-8
Standard AD741 grade with the same pin-compatible 8-pin SOIC package but less stringent offset-voltage selection

📋 Alternatif referensi (tidak dalam katalog)

AD741CN/+

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 SOIC-8
Standard commercial-temperature AD741 selection with the same 8-pin SOIC footprint but non-precision-grade limits

📋 Alternatif referensi (tidak dalam katalog)

AD741LN/+ Rating Maksimal & Karakteristik Listrik

Product Type Precision monolithic operational amplifier
Input Offset Voltage 0.5 mV max (L grade)
Input Offset Voltage Drift 5 uV/degC max (L grade)
Input Bias Current 50 nA max (L grade)
Input Offset Current 5 nA max (L grade)
Common-Mode Rejection Ratio 90 dB min (K and L grades)
Open-Loop Gain 25,000 min at 1 kOhm load
Minimum Supply Voltage 10 V total
Absolute Maximum Supply Voltage +/-22 V
Compensation Internal
Short-Circuit Protection Internal
Paket 8-pin SOIC, lead-free
Tipe Mounting Surface mount

Konfigurasi Pin AD741LN/+

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin produk 1 OFFSET NULL — Offset voltage null terminal
Pin produk 2 INVERTING INPUT — Inverting input terminal
Pin produk 3 NON-INVERTING INPUT — Non-inverting input terminal
Pin produk 4 V- — Negative supply voltage terminal
Pin produk 5 OFFSET NULL — Offset voltage null terminal
Pin produk 6 OUTPUT — Analog output terminal
Pin produk 7 V+ — Positive supply voltage terminal
Pin produk 8 NC — Not connected

Aplikasi Umum

AD741LN/+ cocok untuk 6 aplikasis: Precision Sensor Signal Conditioning, Current-to-Voltage Conversion, Active Precision Filtering, Buffered Voltage Reference, Process Control Error Amplifier, Precision Analog Instrumentation.

🧩

Precision Sensor Signal Conditioning

The AD741LN/+ is suited to low-level sensor amplifiers because its L-grade input offset voltage is limited to 0.5 mV and its offset drift to 5 uV/degC. Those limits directly reduce measurement error when the output is amplified by a high noise gain. Place the device in a non-inverting configuration and bias the non-inverting input close to mid-supply. The 50 nA maximum input bias current also limits the error introduced by high-impedance sensor interfaces. Keep the input traces short, use guarding on high-impedance nodes, and confirm the common-mode range in the manufacturer datasheet before connecting the sensor.

⚡

Current-to-Voltage Conversion

The AD741LN/+ can convert a small shunt voltage into a larger analog signal for monitoring or control. Its 0.5 mV maximum input offset voltage is important when the shunt drop is only a few millivolts, since that offset becomes a meaningful percentage of the measurement. A 50 nA maximum input bias current keeps current errors low with practical shunt values. Use the amplifier in a transimpedance or differential configuration, keep the shunt connection compact, and avoid temperature gradients across the sensing path. Verify that the input common-mode voltage remains within the operating range for the intended supply.

🔧

Active Precision Filtering

The AD741LN/+ fits first- and second-order active filters where low offset and low bias current help preserve small signals. Its minimum open-loop gain of 25,000 at a 1 kOhm load supports closed-loop operation near the precision end of the amplifier family. Internal compensation removes the need for an external compensation network in ordinary inverting or non-inverting stages. Choose resistor and capacitor values that avoid loading the output excessively, and check stability with the intended gain and capacitive load. Keeping the feedback loop compact is especially important because parasitic capacitance can otherwise alter filter behavior.

📺

Buffered Voltage Reference

The AD741LN/+ can buffer a low-level reference voltage when the source must drive a subsequent measurement or control stage. Its 50 nA maximum input bias current limits the load placed on the reference, while the 0.5 mV maximum input offset voltage establishes a defined output offset error. Use a resistive feedback network for stable operation and avoid excessive closed-loop gain with a purely capacitive load. For reference levels near the supply rails, confirm the common-mode and output-swing limits in the AD741 Series datasheet. Decouple the supply pin locally so the reference node is not disturbed by output-current transients.

🏭

Process Control Error Amplifier

The AD741LN/+ can compare a scaled process signal with a reference and amplify the difference for a control loop. Its tightly specified offset voltage and drift reduce static error, while internal compensation and short-circuit protection simplify implementation around sensor and actuator interfaces. Configure the amplifier as an inverting error amplifier and ensure the feedback components are placed away from high-current switching nodes. The minimum 10 V total supply requirement makes it appropriate for classic plus or minus 5 V or split-rail control systems. Add appropriate filtering at the input so switching transients do not saturate the amplifier before the control loop responds.

📱

Precision Analog Instrumentation

Instrumentation systems can use the AD741LN/+ to amplify weak differential inputs before higher-level processing. The 90 dB minimum CMRR helps reject common-mode noise present on sensor lines, while 0.5 mV maximum offset limits the error introduced before gain is applied. The 8-pin SOIC package supports conventional surface-mount assembly and keeps the feedback path manageable on a compact analog board. Use short, shielded or guarded input routes and a dedicated return path for the signal source. Validate the complete signal chain because amplifier offset is only one contributor to total measurement uncertainty.

Ringkasan Produk Direkomendasikan

AD741K/+ Same-family precision grade for alternate selection limits Digunakan di dalam: Precision Sensor Signal Conditioning, Current-to-Voltage Conversion, Process Control Error Amplifier AD741S/+ Same-family selected precision amplifier Digunakan di dalam: Precision Sensor Signal Conditioning, Buffered Voltage Reference AD741J/+ Precision family option for differential measurement front ends Digunakan di dalam: Current-to-Voltage Conversion, Buffered Voltage Reference, Precision Analog Instrumentation AD741C/+ Pin-compatible family member for less demanding filter stages Digunakan di dalam: Active Precision Filtering, Process Control Error Amplifier AD741L/+ L-grade selection for the lowest-offset filter channel Digunakan di dalam: Active Precision Filtering, Precision Analog Instrumentation
What are the key specifications of AD741LN/+ that engineers should know?
The AD741LN/+ is a precision, internally compensated 8-pin SOIC operational amplifier with 0.5 mV maximum input offset voltage, 5 uV/degC maximum offset drift, 50 nA maximum input bias current, and 90 dB minimum CMRR. According to the Analog Devices AD741 Series datasheet, the L grade also provides a minimum open-loop gain of 25,000 with a 1 kOhm load and includes internal short-circuit protection.
What type of operational amplifier is AD741LN/+?
The AD741LN/+ is a precision-grade, general-purpose monolithic operational amplifier in the AD741 series. Analog Devices describes the series as high-performance monolithic operational amplifiers with internal compensation and full short-circuit protection. The L-grade selection provides tighter input offset voltage and drift limits than the standard AD741C, making it appropriate for precision signal-conditioning circuits.
Where can I download the AD741LN/+ datasheet PDF?
The official AD741 Series datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD741.pdf. It contains the AD741, AD741C, AD741J, AD741K, AD741L, and AD741S specifications, absolute maximum ratings, electrical characteristics, pin configuration, and typical performance curves. The product page at analog.com/en/products/ad741.html provides the corresponding ordering information.
Where can I find the AD741LN/+ pinout?
The AD741LN/+ uses the standard 8-pin SOIC operational-amplifier pinout documented in the AD741 Series datasheet. Pins 2 and 3 are the inverting and non-inverting inputs, pin 6 is the output, pin 7 is the positive supply, and pin 4 is the negative supply. Pins 1 and 5 are offset-null terminals, while pin 8 is not connected. Follow the pin-description table in the manufacturer datasheet when assigning PCB tracks.
How do AD741LN/+ and AD741C differ?
The AD741LN/+ is the L-grade precision selection, while the AD741C is the standard AD741 version. The key difference is the guaranteed input offset voltage: the L grade is specified at 0.5 mV maximum, with 5 uV/degC maximum drift, 50 nA maximum input bias current, and 90 dB minimum CMRR. Both use the same internally compensated 8-pin SOIC architecture, but only the L grade targets precision error limits.
Is AD741LN/+ pin compatible with AD741K/+ and AD741S/+?
Yes. The AD741LN/+, AD741K/+, and AD741S/+ use the same 8-pin SOIC pin configuration and differ primarily in their selected electrical performance and temperature grades. According to the Analog Devices AD741 Series datasheet, each J, K, L, and S designation represents a specially tested and selected version with guaranteed precision characteristics. Verify the grade-specific limits and temperature code before substitution.
When should I choose AD741LN/+ instead of a standard 741-family amplifier?
Choose the AD741LN/+ when input offset voltage and thermal drift set the accuracy floor, especially in sensor amplifiers, current-to-voltage converters, and low-level filter stages. Its 0.5 mV maximum offset and 5 uV/degC maximum drift are tighter than a general-purpose amplifier. Choose a broader-bandwidth or lower-cost device instead when those input-error specifications are not limiting.
What is the best drop-in replacement for AD741LN/+?
The closest pin-compatible alternatives in the AD741 family are AD741K/+, AD741J/+, AD741S/+, and AD741C/+, all using the same 8-pin SOIC configuration. For a precision replacement, AD741K/+ is the closest alternative because it shares the 90 dB minimum CMRR characteristic, while AD741L/+ remains the L-grade precision option. Validate grade-specific offset, drift, bias-current, and temperature limits before replacing the part.
What is the best Analog Devices equivalent for AD741LN/+?
The best same-family Analog Devices equivalent is AD741L/+, which retains the L-grade offset and drift limits in the same 8-pin SOIC package. AD741K/+ offers the same minimum 90 dB CMRR but belongs to a different selection grade, while AD741C/+ is the standard AD741 version. Matching the required precision grade and operating temperature range is essential for an equivalent rather than merely compatible part.
Does AD741LN/+ need an external compensation capacitor?
No. The AD741LN/+ is internally compensated, so an external compensation network is not required for normal closed-loop operation. The Analog Devices AD741 Series datasheet identifies internal compensation as a standard feature of the family. Layout still matters: place the supply bypass capacitor close to pin 7 and keep the inverting feedback connection short to minimize parasitic feedback and stability risk.
What supply voltage does AD741LN/+ require?
The AD741LN/+ operates from a minimum total supply voltage of 10 V, consistent with a typical dual-supply arrangement of at least plus or minus 5 V. The absolute maximum supply rating is plus or minus 22 V, which is a stress limit rather than an operating recommendation. Refer to the recommended operating conditions in the manufacturer datasheet for the exact allowable supply range.
How much input offset error does AD741LN/+ add?
The AD741LN/+ adds no more than 0.5 mV of input offset voltage at the specified conditions, and its maximum offset-voltage drift is 5 uV/degC. In a non-inverting amplifier with a gain of 101, the worst-case input-referred offset contribution at the output is approximately 50.5 mV. The Analog Devices AD741 Series datasheet provides the full test conditions and guaranteed limits.
Is AD741LN/+ suitable for sensor and instrumentation amplifier front ends?
Yes. The AD741LN/+ fits low-level sensor front ends because its L-grade specification limits input offset voltage to 0.5 mV, input bias current to 50 nA, and input offset current to 5 nA. Its 90 dB minimum CMRR also supports common-mode rejection in noisy measurement environments. The amplifier still needs suitable input protection and front-end filtering for sensor-specific hazards.
Where can I buy AD741LN/+ and what is its price?
Use the Request a Quote form on this page to request current AD741LN/+ pricing, stock confirmation, and lead time. Quote-first purchasing avoids stale price tables and lets XAIPART confirm the exact AD741LN/+ ordering code, including its lead-free package marking and delivery quantity. Request packaging quantities and a scheduled delivery plan when planning production builds.
What is the lead time and stock status of AD741LN/+?
Request the current AD741LN/+ lead time and stock status through the Request a Quote form on this page. Availability depends on the manufacturer lot, package configuration, and the quantity required by your production schedule. Provide your target date, annual usage, and reel or tray packing preference so the quote can reflect a realistic supply plan.
How should AD741LN/+ be bypassed and laid out on a PCB?
Place a ceramic bypass capacitor directly across the positive supply pins, with the shortest possible connection to pin 7 and its ground return. Keep the offset-null pins 1 and 5 left unconnected in normal service, route the feedback resistor and inverting-input traces away from the input and output nodes, and terminate unused inputs in a defined state. The Analog Devices AD741 Series datasheet supplies the canonical pin configuration for layout.

Data referensi engineering untuk AD741LN/+ — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the AD741LN/+ when the application is limited by input offset voltage, offset drift, or bias current rather than bandwidth or cost. Its 0.5 mV maximum offset, 5 uV/degC maximum drift, and 50 nA maximum bias current make it a strong choice for sensor amplifiers, shunt amplifiers, precision filters, and buffered references. Use AD741K/+ when the same 90 dB minimum CMRR is needed but the L-grade offset limits are not mandatory; verify the relevant K-grade limits before release. AD741J/+ and AD741S/+ are same-package family selections that may suit different accuracy or temperature requirements. AD741C/+ and AD741CN/+ are appropriate when standard AD741 performance is sufficient and lower cost matters more. For every substitution, confirm the supply range, common-mode range, output swing, temperature grade, and offset behavior against the manufacturer datasheet.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini AD741K/+ AD741J/+ AD741S/+ AD741C/+ AD741CN/+
Package 8-pin SOIC, lead-free 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Precision monolithic operational amplifier Monolithic operational amplifier Monolithic operational amplifier Monolithic operational amplifier Monolithic operational amplifier Monolithic operational amplifier
Compensation Internal Internal Internal Internal Internal Internal
Short-Circuit Protection Internal Internal Internal Internal Internal Internal
Absolute Maximum Supply Voltage +/-22 V +/-22 V +/-22 V +/-22 V +/-22 V +/-22 V

Diferensiator Kunci

  • Precision L-grade input error limits (vsAD741C/+)
  • Common-mode rejection retained across precision selections (vsAD741K/+)
  • Internal compensation simplifies closed-loop implementation (vsAD741J/+)
  • Pin-compatible upgrade path across AD741 grades (vsAD741S/+)

Catatan Desain

Place the positive-supply bypass capacitor immediately across pin 7 and the ground or negative-supply return. Route the amplifier output to pin 6, the inverting input to pin 2, and the non-inverting input to pin 3 as identified in the manufacturer pin-description table. Leave the two offset-null terminals unconnected unless calibration is required, and keep input and feedback traces apart from switching-node copper.

Do not treat the +/-22 V absolute maximum rating as an operating recommendation. The family requires a minimum 10 V total supply, and operation must also remain within the recommended supply and common-mode ranges. Confirm those limits in the AD741 Series datasheet. Also avoid using a generic standard-grade AD741C when the design depends on the L grade's 0.5 mV maximum offset and 5 uV/degC maximum drift.

For high-impedance sensor inputs, the 50 nA maximum input bias current can create meaningful voltage error through source and feedback impedances. Keep input-node leakage low, use guarding where practical, and avoid long unshielded traces. The 90 dB minimum CMRR helps with common-mode noise but does not eliminate differential interference, so route input pairs together and keep them away from high-current switching paths.

Preserve the integrity of the feedback connection by keeping pin 2 and the feedback components physically compact. Excessive parasitic capacitance inside the feedback loop can affect stability or the intended closed-loop bandwidth. Because the AD741LN/+ is internally compensated, no external compensation capacitor is needed for ordinary use, but a short feedback route remains the best way to prevent unintended feedback through board capacitance.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The AD741LN/+ ordering code includes the lead-free package designation, but explicit RoHS, REACH, halogen-free, and conflict-minerals declarations were not present in the manufacturer or distributor results used for this page. AEC-Q100 is not applicable to this general-purpose operational amplifier.

Data disahkan pada: 2026-11-06 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

AD741LN/+ datasheet AD741LN/+ specifications AD741LN/+ pinout AD741LN/+ SOIC-8 op amp AD741LN/+ equivalent AD741LN/+ replacement AD741LN/+ drop-in replacement AD741LN/+ vs AD741K/+ AD741LN/+ vs AD741C/+ Analog Devices AD741LN/+ AD741LN/+ precision op amp AD741LN/+ 0.5mV offset amplifier AD741LN/+ price AD741LN/+ stock and lead time AD741LN/+ sensor amplifier

Komponen dan Istilah Terkait

Analog Devices AD741LN/+ AD741 AD741C AD741J AD741K AD741L AD741S operational amplifier monolithic operational amplifier precision amplifier analog amplifier amplifier IC integrated circuit input offset voltage input offset voltage drift input bias current input offset current common-mode rejection ratio CMRR open-loop gain internal compensation short-circuit protection SOIC-8 surface-mount package sensor signal conditioning current-to-voltage conversion active filter
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ