Analog Devices

AD8014ARZ - 400MHz Current-Feedback Amplifier | Analog Devices

MPN: AD8014ARZ ✓ Aktif
1.3 mA Vdss 8-pin SOIC Package
MOQ: 1 |

AD8014ARZ Ringkasan

The Analog Devices AD8014ARZ is a single current-feedback operational amplifier with 400 MHz bandwidth, typically 1.3 mA supply current, and operation from a single 5 V to 12 V supply or dual ±2.5 V to ±6 V supplies. The device is packaged in an 8-pin SOIC and is intended for low-power, high-speed signal-chain designs.

A current-feedback operational amplifier is a high-speed amplifier whose feedback network uses a balance of voltage and current feedback rather than relying exclusively on conventional voltage feedback. Within the amplifier-IC hierarchy, it belongs to the operational-amplifier and signal-conditioning categories, combining wide bandwidth with relatively low power consumption. This architecture is especially useful where fast transient response, output drive, and low distortion are more important than extremely low DC input-offset voltage.

The AD8014ARZ combines 400 MHz bandwidth with approximately 1.3 mA typical supply current. Its proprietary amplifier architecture is designed to deliver high performance at comparatively low power, making the device suitable for consumer, communications, instrumentation, and general-purpose signal-processing equipment. It is a current-feedback amplifier rather than a voltage-feedback amplifier, so feedback-resistor selection and stability must follow the current-feedback design method rather than the conventional closed-loop-gain equation.

Operation from one 5 V to 12 V supply supports low-voltage analog systems, while operation from dual ±2.5 V to ±6 V supplies provides additional headroom for bipolar signal paths. The 8-pin SOIC package keeps the footprint compact and supports conventional surface-mount assembly. Because this is a high-speed amplifier, board layout, grounding, decoupling, and feedback-component placement can materially affect usable bandwidth and pulse response.

Typical applications include video and graphics signal conditioning, communications infrastructure, high-speed instrumentation, active filters, data-acquisition front ends, and general-purpose gain stages. The 400 MHz bandwidth is particularly valuable for signals whose transition rates exceed the practical bandwidth of slower general-purpose amplifiers. The low 1.3 mA typical supply current also helps preserve power budget in compact systems.

Use short, direct feedback paths, place the feedback network close to the amplifier pins, and maintain a low-impedance return beneath the device. Input and supply decoupling should be positioned to minimize inductive loops. The datasheet gain-bandwidth and stability guidance should be followed because current-feedback amplifiers do not follow the closed-loop bandwidth behavior of an ideal voltage-feedback amplifier.

This page consolidates the official product information, ordering details, electrical characteristics, and application guidance into an engineering-focused reference. It also identifies candidate drop-in alternatives and highlights the package, power-supply, bandwidth, and topology differences that must be checked before PCB substitution.

Alternatif penggantian untuk AD8014ARZ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

AD8014AR

✅ Drop-In
📦 SOIC-8
Same AD8014 single current-feedback amplifier and 8-pin SOIC format; 400 MHz bandwidth and approximately 1.3 mA typical supply current remain unchanged, with only the ordering suffix differing

📋 Alternatif referensi (tidak dalam katalog)

AD8014ARZ Rating Maksimal & Karakteristik Listrik

Amplifier Type Current-feedback operational amplifier
Number of Circuits 1 circuit
Bandwidth 400 MHz
Typical Supply Current 1.3 mA
Single-Supply Operating Range 5 V to 12 V
Dual-Supply Operating Range ±2.5 V to ±6 V
Paket 8-pin SOIC
Tipe Mounting Surface mount
Feedback Topology Current feedback
Output Drive High output drive
Distortion Performance Low distortion
Power Class Low-power high-performance amplifier
Status RoHS RoHS-compliant
Lead-Free Status Lead-free
Green Product Green

AD8014ARZ 8-pin soic Diamant Konfigurasi Panduan

Konfigurasi pin untuk AD8014ARZ (8-pin soic pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 8-pin soic untuk AD8014ARZ

Tidak ada data diatribut pin yang tersedia untuk AD8014ARZ.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

AD8014ARZ cocok untuk 6 aplikasis: High-Speed Video Signal Conditioning, Communications RF and IF Baseband Conditioning, Active Filtering and Frequency Shaping, Data-Acquisition Front Ends, Precision Test and Measurement Instruments, Consumer and Industrial Analog Interfaces.

📺

High-Speed Video Signal Conditioning

The AD8014ARZ is well suited to video and graphics signal conditioning because it combines 400 MHz bandwidth with high output drive and low distortion. Place the device in a non-inverting or inverting gain stage after the source, and keep the feedback resistor close to the output and inverting-input pins. Its approximately 1.3 mA typical supply current helps preserve the power budget in compact video-processing equipment. The principal design trade-off is that current-feedback gain must be established with the recommended feedback resistor rather than by assuming a conventional voltage-feedback gain equation.

🌐

Communications RF and IF Baseband Conditioning

The AD8014ARZ can condition low-level communications signals where fast transitions and controlled distortion are important. Its 400 MHz bandwidth provides ample speed for many baseband, IF, and clock-buffer signal chains, while the low-power current-feedback architecture supports dense analog sections. Position the feedback network and bypass capacitors close to the device to limit parasitic inductance and preserve pulse fidelity. Confirm the source impedance and required gain against the manufacturer’s current-feedback stability guidance before finalizing the layout.

🔧

Active Filtering and Frequency Shaping

For active filters, the AD8014ARZ combines wide bandwidth with the strong output drive needed to preserve filter response across its useful range. Its 400 MHz speed allows several filter sections to operate above the bandwidth of conventional low-power precision amplifiers. Use low-inductance resistors and capacitors around the amplifier, observe the recommended current-feedback resistor, and verify stability and distortion with the actual source and load impedances. The approximately 1.3 mA typical supply current is valuable when multiple amplifier stages must fit within a limited power allocation.

📈

Data-Acquisition Front Ends

The AD8014ARZ can serve as a fast analog front-end stage in data-acquisition systems when the source impedance is compatible with current-feedback operation. Its 400 MHz bandwidth accommodates rapid sensor or ADC drive signals, while high output drive reduces the risk of loading sensitive upstream circuitry. Keep input traces short, provide local supply bypassing, and avoid long routes between the feedback resistor and inverting input. Validate settling behavior and full-scale performance because bandwidth alone does not define low-frequency accuracy or settling time.

⚡

Precision Test and Measurement Instruments

Test and measurement front ends benefit from the AD8014ARZ combination of 400 MHz bandwidth, low distortion, and approximately 1.3 mA typical supply current. The amplifier can buffer fast probes, process calibration signals, or provide gain before a sampling stage without the power draw of a larger high-speed device. Use a low-impedance reference return and symmetrical decoupling to suppress measurement error. If DC accuracy dominates the test specification, evaluate a precision voltage-feedback amplifier alongside the AD8014ARZ rather than assuming wide bandwidth alone meets the instrument requirement.

🏭

Consumer and Industrial Analog Interfaces

The AD8014ARZ is suitable for general-purpose consumer and industrial analog interfaces that require higher speed than a conventional low-cost op amp. Its 8-pin SOIC package simplifies surface-mount assembly, and the typical 1.3 mA supply current supports compact multi-rail systems. Use the amplifier for sensor conditioning, control-signal buffering, or intermediate gain stages where transient performance matters. Review supply tolerance, output swing, stability, and component tolerances during schematic review because the device is optimized for bandwidth rather than rail-to-rail operation.

What is the AD8014ARZ and what are its key specifications?
The AD8014ARZ is a single, low-power, 400 MHz current-feedback operational amplifier in an 8-pin SOIC package. According to the Analog Devices AD8014 manufacturer datasheet, it typically draws 1.3 mA of supply current and operates from a single 5 V to 12 V supply or from dual ±2.5 V to ±6 V supplies. Its high bandwidth, low distortion, and strong output drive make it appropriate for fast analog signal paths that require more speed than a general-purpose precision amplifier.
Where can I download the AD8014ARZ datasheet PDF?
The official AD8014ARZ technical documentation is available through Analog Devices on the AD8014 product page at analog.com. The manufacturer product page links the current AD8014 datasheet, package information, ordering variants, and product status. Use the AD8014 family datasheet for the electrical characteristics, pin configuration, current-feedback application guidance, recommended feedback resistor, and power-supply connection diagrams.
Where can I find the AD8014ARZ pinout?
Use the pin-configuration table and package drawing in the Analog Devices AD8014 manufacturer datasheet to assign the eight SOIC pins. The AD8014ARZ is an 8-pin SOIC single-amplifier package, but pin names and alternative-function details must be taken from the family pin-description table rather than inferred from another SOIC amplifier. Keep the exposed signal and supply traces consistent with the datasheet's recommended application circuit.
Is the AD8014ARZ suitable for high-speed video signal conditioning?
The AD8014ARZ is suitable for high-speed signal conditioning because it provides 400 MHz bandwidth and high output drive in a low-power 8-pin SOIC package. According to the Analog Devices AD8014 manufacturer datasheet, the amplifier combines bandwidth, power, output-drive, and distortion performance. This makes it useful for video, communications, instrumentation, active filtering, and other applications that require rapid signal transitions.
How should a current-feedback amplifier be configured for stable gain?
Configure the AD8014ARZ as a current-feedback amplifier by using the feedback resistor recommended for the intended gain and following the manufacturer's gain-setting guidance. Unlike an ideal voltage-feedback amplifier, bandwidth does not decrease in the same closed-loop manner as gain rises. Keep the feedback component and output path compact, and use the datasheet's recommended values when establishing initial signal integrity and stability performance.
What is the difference between AD8014ARZ and AD8017ARZ?
The AD8014ARZ is a single, low-power current-feedback amplifier, while the AD8017ARZ is a dual, high-output-current voltage-feedback amplifier. The AD8014ARZ typically consumes 1.3 mA and supports single 5 V to 12 V or dual ±2.5 V to ±6 V operation. Because amplifier topology, channel count, output drive, and feedback design differ, verify the complete pinout and stability requirements before considering any board-level substitution.
When should I choose the AD8014ARZ over a conventional voltage-feedback amplifier?
Choose the AD8014ARZ when the signal path needs 400 MHz-class bandwidth, low distortion, high output drive, and relatively low power consumption. It is particularly appropriate when the source impedance is low and the application can be designed around current-feedback gain-setting methods. A voltage-feedback amplifier remains preferable when very high DC precision, rail-to-rail input behavior, or conventional gain relationships dominate the design.
Is the AD8014ARZ suitable for communications and instrumentation equipment?
The AD8014ARZ fits many communications and instrumentation signal paths because its 400 MHz bandwidth supports fast transient signals while its typical 1.3 mA supply current keeps power use low. According to the Analog Devices AD8014 manufacturer datasheet, the proprietary architecture emphasizes combined bandwidth, output drive, and distortion performance. The complete application still requires careful grounding, decoupling, and feedback-layout verification.
What are the AD8014ARZ power-supply requirements?
The AD8014ARZ operates from a single 5 V to 12 V supply or from dual ±2.5 V to ±6 V supplies. According to the Analog Devices AD8014 manufacturer datasheet, its typical supply current is 1.3 mA. Use local bypass capacitors close to the supply pins, observe the absolute-maximum ratings, and account for ground-reference requirements when operating from dual supplies.
What can replace the AD8014ARZ on an existing PCB?
The closest documented same-family ordering alternative is AD8014AR, which retains the AD8014 current-feedback architecture and 8-pin SOIC format. Any proposed replacement must be checked for exact pin functions, supply limits, gain-setting requirements, bandwidth, distortion, and stability. AD8017ARZ and AD8018AR are not drop-in choices because they use different amplifier topologies or channel counts, so their boards require different pin assignments.
What is the best drop-in replacement for the AD8014ARZ?
The best directly documented option is the AD8014AR because it is another AD8014-family ordering designation with the same single-amplifier, 8-pin SOIC implementation. The AD8014 manufacturer documentation and product comparison information support the same 400 MHz performance class and 1.3 mA typical supply-current family characteristics. Verify the suffix-specific ordering, packaging, and pin configuration before approving the substitution for production.
Where can I buy the AD8014ARZ and check its current lead time?
Use the Request a Quote form on this page to ask about AD8014ARZ availability, current lead time, minimum order quantity, and production quantity pricing. The quote team can confirm the exact 8-pin SOIC ordering code and current lifecycle position for the requested quantity. Package availability and lead time can change, so request the result for the planned BOM rather than relying on an archived stock record.
Is the AD8014ARZ in stock?
Current AD8014ARZ stock should be confirmed through the Request a Quote form on this page using the exact MPN AD8014ARZ and the required delivery date. Inventory can vary by package, quantity, and regional fulfillment schedule. The form allows a buyer to request a current quotation and delivery commitment without confusing the exact ordering code with another member of the AD8014 family.
What is the price of the AD8014ARZ?
The current AD8014ARZ quotation is available through the Request a Quote form on this page. Submit the exact MPN, desired package quantity, ship-to location, and target delivery schedule so the commercial response reflects current supply conditions. Because pricing and inventory can change with market and order size, the quote form provides the appropriate channel for a current unit and volume price.
Is the AD8014ARZ RoHS-compliant and suitable for lead-free assembly?
The AD8014ARZ is identified as a RoHS-compliant, lead-free, and green component. According to the AD8014 manufacturer datasheet and manufacturer product information, it is intended for modern lead-free manufacturing workflows. RoHS and lead-free status do not by themselves determine AEC-Q100 qualification, so automotive programs should request separate qualification documentation for the exact ordered device.

Data referensi engineering untuk AD8014ARZ — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the AD8014ARZ when a low-impedance signal path needs high speed, strong output drive, and low distortion with approximately 1.3 mA typical supply current. Its 400 MHz bandwidth makes it appropriate for video, communications, active filtering, data-acquisition front ends, and general analog interfaces where transitions must be preserved. The AD8014AR is the closest documented same-family ordering alternative and retains the same current-feedback architecture and 8-pin SOIC format. Do not substitute the AD8017ARZ without redesigning around its dual voltage-feedback topology, or the AD8018AR because its dual-channel pinout differs. If rail-to-rail input operation, very low offset voltage, or conventional closed-loop gain behavior is more important than bandwidth, choose a precision voltage-feedback amplifier instead. Validate feedback values, source impedance, output swing, decoupling, and stability in the final circuit.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini AD8014AR
Brand Analog Devices Analog Devices
Package 8-pin SOIC 8-pin SOIC
Amplifier Type Current-feedback operational amplifier Current-feedback operational amplifier
Number of Circuits 1 circuit 1 circuit
Bandwidth 400 MHz 400 MHz
Typical Supply Current 1.3 mA 1.3 mA
Single-Supply Operating Range 5 V to 12 V 5 V to 12 V
Dual-Supply Operating Range ±2.5 V to ±6 V ±2.5 V to ±6 V
Output Drive High output drive High output drive

Diferensiator Kunci

  • Combines wide bandwidth with low supply consumption (vsAD8014AR)
  • Uses a current-feedback topology optimized for high-speed operation (vsAD8017ARZ)
  • Preserves a compact 8-pin SOIC implementation (vsAD8018AR)

Catatan Desain

Keep the feedback resistor, inverting-input route, output route, and bypass capacitors as short and direct as practical. High-speed currents can expose trace inductance and parasitic capacitance that reduce stability or degrade pulse response. Place a solid, low-impedance ground reference beneath the device where the package and board design permit, and keep unrelated switching and digital return currents away from the analog input and output paths.

Do not design the AD8014ARZ by applying the conventional voltage-feedback gain-bandwidth equation. Current-feedback amplifier bandwidth depends on the feedback resistor and circuit topology, so begin with the values recommended in the AD8014 manufacturer datasheet. Using an arbitrary feedback value can produce unexpected peaking, oscillation, or excessive distortion even when the nominal closed-loop gain appears correct.

Use local supply bypassing with the shortest possible connection from each bypass capacitor to the relevant power and ground pins. Account for supply ripple and output-swing margin at both single-supply and dual-supply operating points. Although the typical supply current is approximately 1.3 mA, source impedance, protection networks, and neighboring circuits can still influence rail noise and available output swing.

Validate the complete amplifier stage with the intended source and load impedances because high bandwidth can expose reflections or ringing that a lower-bandwidth amplifier would hide. Keep sensitive input nets away from the output and feedback nodes, use controlled-impedance routing where applicable, and verify overshoot and settling with an oscilloscope before releasing the design for production.

Informasi Konformitas

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Yes
Bebas Halogena
Unknown
Mineral Konflik
Unknown

RoHS-compliant, lead-free, and green status are identified for AD8014ARZ. REACH, AEC-Q100, halogen-free, and conflict-minerals status are unknown.

Pencarian Terkait

AD8014ARZ datasheet AD8014ARZ pinout AD8014ARZ datasheet pdf AD8014ARZ equivalent AD8014ARZ replacement AD8014ARZ cross reference AD8014ARZ vs AD8017ARZ AD8014ARZ 400MHz amplifier AD8014ARZ 8-SOIC footprint AD8014 current feedback amplifier AD8014ARZ price AD8014ARZ stock Analog Devices AD8014ARZ AD8014ARZ video signal conditioning AD8014ARZ current feedback gain

Komponen dan Istilah Terkait

Analog Devices AD8014 AD8014ARZ AD8014AR AD8017ARZ AD8018AR current-feedback amplifier operational amplifier voltage-feedback amplifier signal-conditioning IC amplifier IC semiconductor 400 MHz bandwidth 1.3 mA supply current current-feedback topology 8-pin SOIC SOIC package surface-mount package 5 V to 12 V single supply dual ±2.5 V to ±6 V supply high output drive low distortion video signal conditioning active filter data-acquisition front end RoHS lead-free manufacturing
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ