AD9550BCPZ - 810 MHz Integer-N Clock Translator | ADI
MPN: AD9550BCPZ ✓ AktifAD9550BCPZ Ringkasan
A clock translator is a timing IC that accepts an input reference and generates a related clock or translated frequency. Clock translators belong to the clock and timing IC hierarchy within integrated circuits and semiconductor timing-control devices. The AD9550 uses a phase-locked loop to multiply or divide a reference frequency while supporting integer-N translation relationships used in communications equipment.
Key characteristics include an 810 MHz maximum clock frequency and a single output, allowing the device to support compact frequency-conversion stages in network and line-card equipment. The integer-N PLL architecture is intended for frequency plans that can be implemented using integer feedback-divider ratios. Its 32-LFCSP-WQ package also provides a relatively compact surface-mount footprint for communications hardware with limited board area.
The AD9550 is identified as a recommended part for new designs and targets Ethernet, GPON, SONET/SHD, T1, and E1 clock or frequency-translation applications. These standards cover different wireline transport functions, but the common design requirement is deterministic clock generation and frequency conversion. The exact supported input range, reference frequency, output frequency, output format, and divider configuration must be confirmed against the operating conditions in the Analog Devices manufacturer datasheet.
Because the device is intended for high-speed communications infrastructure, reference-clock quality, loop filtering, output jitter, and supply decoupling are central implementation concerns. The reference input should be routed away from high-speed output traces, and power and ground planes should be arranged to minimize return-path discontinuity. Input, output, and reference connections should use controlled-impedance routing when the implementation requires predictable signal integrity.
The main design trade-off is specialization. Compared with a general-purpose programmable clock generator, the AD9550 concentrates its architecture on integer-N frequency translation for wireline and base-station systems. This can simplify compliant clock trees, but the input range and translation ratios must fit the device's specified operating envelope. Verify all clock frequencies and divider selections in the manufacturer datasheet before releasing the PCB.
This page combines the exact package and frequency information for the AD9550BCPZ with replacement guidance, comparison parameters, and practical PCB implementation notes. It is intended to help engineers determine package compatibility and whether the integer-N architecture fits a communications clock tree before requesting a quotation.
Alternatif penggantian untuk AD9550BCPZ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
AD9550BCPZ-REEL7
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
AD9550BCPZ Spesifikasi
| Product Type | Integer-N PLL clock and frequency translator |
| Frekuensi Bawah Maximum | 810 MHz |
| Output Count | 1 output |
| PLL Architecture | Integer-N phase-locked loop |
| Paket | 32-LFCSP-WQ (5 mm x 5 mm) |
| Jumlah Pin | 32 pins |
| Tipe Mounting | Surface mount |
| Target Applications | Ethernet, GPON, SONET/SHD, T1, and E1 |
| Design Recommendation | Recommended for new designs |
AD9550BCPZ 32-lfcsp-wq (5 mm x 5 mm) Diamant Konfigurasi Panduan
Konfigurasi pin untuk AD9550BCPZ (32-lfcsp-wq (5 mm x 5 mm) pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk AD9550BCPZ.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
AD9550BCPZ cocok untuk 6 aplikasis: Ethernet Equipment Clocking, GPON Access-Network Timing, SONET and SDH Transport Timing, T1 and E1 Line-Card Timing, Base-Station Timing Distribution, Synchronous Digital Backplane.
Ethernet Equipment Clocking
The AD9550BCPZ fits Ethernet line-card and network-equipment clock trees that require a related frequency derived from a stable reference. Its integer-N PLL architecture supports deterministic translation relationships, while the 810 MHz maximum clock frequency provides headroom for demanding timing trees. Place the device between the system reference and the required clock domain, then confirm the input range, divider ratio, and output specification against the manufacturer datasheet. Keep the reference path short and isolated from data and power-conversion stages to protect clock quality.
GPON Access-Network Timing
AD9550BCPZ is suitable for GPON access equipment that needs integer-N clock or frequency translation within a communications timing architecture. The single-output configuration can support a dedicated translated clock, and the 810 MHz maximum operating frequency accommodates high-rate timing requirements. Designers should establish the reference-to-output relationship before layout because the permitted input and divider combinations constrain valid configurations. Pay particular attention to reference jitter, output drive, and return-path continuity when implementing the clock branch on a dense access-network board.
SONET and SDH Transport Timing
The AD9550BCPZ can support clock-generation or frequency-translation stages in SONET and SDH transport equipment. Its integer-N PLL is appropriate for communication systems whose frequency plans rely on integer divider relationships, and the one-output architecture is useful where only one derived clock is required. The implementation should preserve a clean reference path and verify output format, divider settings, and jitter under the intended traffic conditions. Use the Analog Devices manufacturer datasheet to select the correct clock plan and board-level termination.
T1 and E1 Line-Card Timing
The AD9550BCPZ is applicable to T1 and E1 line-card designs that require a controlled clock derived from a common system reference. Its integer-N PLL architecture helps engineers implement predictable translation stages, and the 810 MHz maximum frequency accommodates clocking requirements above the legacy transport rates. Because the device has one output, each required clock domain may need a separate branch or another suitable clock device. Validate reference jitter, output levels, and divider values in the manufacturer datasheet before release.
Base-Station Timing Distribution
AD9550BCPZ is identified by Analog Devices for base-station applications where low-cost integer-N clock translation can support communications timing chains. The compact 32-LFCSP-WQ package measures 5 mm by 5 mm, helping conserve board area in densely populated radio and baseband equipment. Use the device where the required translation can be achieved with an integer-N relationship and only one output is needed. Thermal, jitter, and supply-decoupling reviews are essential because clock quality can influence downstream RF and digital timing behavior.
Synchronous Digital Backplane
The AD9550BCPZ can serve in a synchronous digital backplane when the backplane clock must be translated from a centralized reference. Its 810 MHz maximum clock frequency and integer-N PLL provide a compact way to derive a required system clock while retaining one-output simplicity. The design must ensure that the selected division relationship, reference quality, and output interface satisfy all downstream logic. Route the clock over a controlled-impedance network and keep the reference distribution isolated from high-speed data to minimize coupling and timing degradation.
Data referensi engineering untuk AD9550BCPZ — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | AD9550BCPZ-REEL7 |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 32-LFCSP-WQ (5 mm x 5 mm) | 32-LFCSP-WQ (5 mm x 5 mm) - same |
| Maximum Clock Frequency | 810 MHz | 810 MHz |
| Output Count | 1 output | 1 output |
| PLL Architecture | Integer-N PLL | Integer-N PLL |
| Target Applications | Ethernet, GPON, SONET/SHD, T1, E1 | Ethernet, GPON, SONET/SHD, T1, E1 |
| Pin Count | 32 pins | 32 pins |
| Mounting Type | Surface mount | Surface mount |
| Design Status | Recommended for new designs | Recommended for new designs |
Diferensiator Kunci
- Identical same-device electrical configuration (vsAD9550BCPZ-REEL7)
- Communications-focused integer-N translation (vsAD9550BCPZ-REEL7)
- Compact 32-pin surface-mount implementation (vsAD9550BCPZ-REEL7)
Catatan Desain
Keep the reference input route short, controlled-impedance, and separated from the clock output path. Avoid sharing high-impedance reference traces with data buses or supply-converter return currents. The AD9550 can operate up to 810 MHz, so small loop areas and continuous return paths are important. Validate the reference amplitude, edge quality, and decoupling arrangement against the Analog Devices manufacturer datasheet.
Implement the 32-LFCSP-WQ land pattern directly from the package drawing and pin table in the manufacturer datasheet. Pay attention to the exposed thermal pad, its thermal-via pattern, and the clearance around adjacent high-speed nets. Confirm pin numbering against the selected assembly orientation before artwork release because mirrored or rotated package interpretation can disconnect power or clock pins.
Place the prescribed input and output capacitors close to their corresponding device pins, with a low-impedance ground connection and no unnecessary loop area. Separate sensitive reference or clock routes from switching-node copper wherever the board topology permits. The required supply voltage and capacitor values must be taken from the AD9550 manufacturer datasheet rather than inferred from adjacent circuit blocks.
Do not assume that every clock translator with a similar frequency rating is pin-compatible. Before substituting another device, compare input reference range, integer divider structure, output logic and termination, pin assignments, package drawing, supply voltage, and jitter. The identified AD9550BCPZ-REEL7 option retains the same AD9550 configuration; a different manufacturer's clock IC may require both schematic and PCB-layout changes.
Informasi Konformitas
The available product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The device is a communications clock IC rather than an automotive-qualified part, so AEC-Q100 is marked not applicable.