Analog Devices

AD9610BH Fast-Settling Wide-Bandwidth Op Amp | Analog Devices

MPN: AD9610BH ✓ Aktif
12-pin TO-8 Package
MOQ: 1 |

AD9610BH Ringkasan

The Analog Devices AD9610BH is a fast-settling, wide-bandwidth, DC-coupled operational amplifier packaged in a 12-pin TO-8 package. It combines strong DC specifications with exceptional dynamic performance and low distortion across the operating bandwidth. The AD9610BH is intended for high-speed signal-chain designs requiring accurate amplification, rapid settling, and high spectral purity.

An operational amplifier, commonly called an op amp, is an analog integrated circuit that uses very high open-loop gain to amplify the difference between two input voltages. Within the broader semiconductor hierarchy, the AD9610BH belongs to the amplifier IC family and provides the active gain function required by instrumentation, communications, imaging, and precision signal-processing systems. Its DC-coupled architecture allows signals extending down to zero frequency to be processed without coupling capacitors in the primary signal path.

The AD9610BH differentiates through its combination of fast settling behavior, wide bandwidth, low-noise performance, low harmonic distortion, and low intermodulation distortion. These characteristics make it useful in circuits where accurate waveform reproduction matters during large or rapid input transitions. The 12-pin TO-8 package provides a traditional through-hole mechanical format suited to systems using plated-through-hole assembly, laboratory prototypes, and higher-reliability production boards.

Analog Devices describes the AD9610 as a wide-bandwidth, fast-settling amplifier with exceptional spectral purity across the full bandwidth. This performance makes it relevant to analog-to-digital converter drive circuits, flash-memory interface amplification, instrumentation, and high-speed control systems. Accurate design use requires checking supply limits, input and output swing, gain-bandwidth behavior, settling time, noise, distortion, and output-current requirements against the application signal amplitude and impedance.

Typical applications include ADC input drivers, flash-memory signal conditioning, high-speed instrumentation, communications receivers, and precision measurement front ends. In each case, the amplifier's wide bandwidth supports rapid signal transitions, while its fast-settling characteristic helps minimize the time required to reach an accurate output level. The DC-coupled input and output paths are particularly useful when the signal contains significant low-frequency content or a bipolar component.

For implementation, follow the manufacturer datasheet for supply bypass, pin connectivity, output-loading limits, stability requirements, and compensation guidance. Place power-decoupling components close to the appropriate supply pins and keep sensitive input and feedback routes short to minimize parasitic pickup and feedback-loop instability. Account for the TO-8 package when assigning insertion-hole positions and mechanical clearances.

This product page combines the manufacturer description, package information, technical comparison fields, pinout availability, sourcing guidance, and practical design notes for the AD9610BH. It supports faster engineering triage by separating confirmed device attributes from parameters that require confirmation against the Analog Devices datasheet before schematic release or production procurement.

Alternatif penggantian untuk AD9610BH — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

AD9610

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 12-pin TO-8
The AD9610 is the base-family designation; suffix-specific temperature grade and ordering options must be checked, while the core fast-settling, wide-bandwidth amplifier function remains unchanged

📋 Alternatif referensi (tidak dalam katalog)

AD9610BH Rating Maksimal & Karakteristik Listrik

Product Type Operational Amplifier
Signal Path DC-coupled
Amplifier Architecture Voltage-feedback operational amplifier
Paket 12-pin TO-8
Tipe Mounting Through-hole

AD9610BH 12-pin to-8 Diamant Konfigurasi Panduan

Konfigurasi pin untuk AD9610BH (12-pin to-8 pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 12-pin to-8 untuk AD9610BH

Tidak ada data diatribut pin yang tersedia untuk AD9610BH.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

AD9610BH cocok untuk 6 aplikasis: High-Speed ADC Input Driver, Flash-Memory Signal Conditioning, Precision Instrumentation Front End, Communications Receiver IF Stage, High-Speed Control and Monitoring, Test and Measurement Signal Path.

🔧

High-Speed ADC Input Driver

The AD9610BH is suitable for an ADC input stage when the converter requires a low-distortion signal and rapid settling. Its wide-bandwidth, DC-coupled architecture allows the amplifier to reproduce both low-frequency content and fast transitions while limiting harmonic and intermodulation products. The amplifier is placed in an inverting or noninverting configuration according to the required gain and phase relationship, with feedback components selected for the target closed-loop bandwidth. Close attention is required for ADC input capacitance, which can alter frequency response and stability. Confirm the converter's full-scale input range and sampling requirements against the AD9610BH output swing and settling specifications before release.

📱

Flash-Memory Signal Conditioning

The AD9610BH fits flash-interface signal-conditioning circuits because Analog Devices identifies Flash driving as an intended AD9610 application. Wide bandwidth supports the rapid logic transitions encountered in high-speed memory systems, while fast settling and low distortion help preserve data-integrity margins. The op amp can provide gain, level translation, buffering, or impedance conversion when the flash device requires a stronger or more isolated drive signal. PCB trace length and capacitive loading should be controlled because the amplifier must remain stable across the expected flash-output and input capacitance. Verify the memory interface's voltage levels, edge rates, channel requirements, and timing budget before selecting the final gain configuration.

⚡

Precision Instrumentation Front End

The AD9610BH can serve as the active element in a high-speed instrumentation front end when measurements include small signals alongside rapid transients. Its DC-coupled input preserves the low-frequency component of the measurement, while wide bandwidth and fast settling reduce timing error during acquisition. Low harmonic distortion and intermodulation distortion are particularly valuable when the front end must maintain spectral integrity through multiple signal-processing stages. The practical implementation must account for source impedance, input bias current, resistor noise, and the amplifier's offset behavior. Use short, shielded routing for sensitive nodes and follow the manufacturer's reference configuration to avoid adding parasitic feedback that changes the intended closed-loop response.

🌐

Communications Receiver IF Stage

The AD9610BH is applicable to intermediate-frequency amplification in communications receivers that need broad bandwidth and low distortion. The DC-coupled topology supports signals centered around nonzero carrier frequencies without relying on an input coupling capacitor, while the fast-settling characteristic is useful in burst or rapidly keyed receiver paths. Low harmonic and intermodulation products help preserve adjacent-channel and in-band signal integrity. The gain stage should be evaluated for stability with realistic source, load, and filter impedances because those networks can materially alter the closed-loop response. Confirm the required IF bandwidth, output level, and neighboring-channel rejection targets against the manufacturer's distortion and noise characterization.

🏭

High-Speed Control and Monitoring

The AD9610BH can amplify control-sensor or monitor signals that combine a low-frequency component with rapid changes. Its wide bandwidth allows the amplifier to retain accurate amplitude relationships across demanding transient intervals, and fast settling supports systems that sample the signal shortly after a transition. The DC-coupled architecture also avoids low-frequency attenuation from an input coupling network, making the device relevant to industrial monitoring where waveform shape matters. The design should maintain adequate output swing and stable operation with the connected transducer, filter, and controller. Shielded routing, grounding, and short feedback paths are important when the source is low level and the working environment contains switching or motor-related noise.

🔧

Test and Measurement Signal Path

The AD9610BH is relevant to test and measurement equipment that must amplify waveforms with minimal spectral contamination. Wide bandwidth handles fast edges, fast settling reduces the interval before a measurement is valid, and low distortion preserves the relationship between the input and output waveform. The amplifier can be placed before an ADC, data converter, or external sampling system when the source impedance and loading require active drive. Its 12-pin TO-8 through-hole format also supports laboratory prototyping and boards designed around plated-through-hole assembly. Establish the required gain, bandwidth, full-scale output, and settling accuracy for the instrument, and confirm that the selected configuration remains stable with the intended cable and converter input capacitance.

Ringkasan Produk Direkomendasikan

AD9610 Same-family reference for the AD9610BH signal-path function Digunakan di dalam: High-Speed ADC Input Driver, Flash-Memory Signal Conditioning, Precision Instrumentation Front End, Communications Receiver IF Stage, High-Speed Control and Monitoring, Test and Measurement Signal Path
What is the AD9610BH operational amplifier?
The AD9610BH is a fast-settling, wide-bandwidth, DC-coupled operational amplifier from Analog Devices in a 12-pin TO-8 package. According to the Analog Devices product page, it combines superior DC specifications with exceptional dynamic performance and low harmonic distortion, intermodulation distortion, and noise across its full bandwidth. It is intended for high-speed analog signal chains where rapid settling and spectral purity are important.
What are the key specifications of AD9610BH that engineers should know?
The AD9610BH is confirmed as a fast-settling, wide-bandwidth, DC-coupled operational amplifier in a 12-pin TO-8 package. Its defining characteristics include low distortion, low intermodulation distortion, and low noise across the bandwidth. The Analog Devices product page also identifies driving Flash and other high-speed applications as use cases. Exact bandwidth, settling-time, supply-voltage, and noise-density limits should be taken from the manufacturer datasheet before final circuit design.
Where can I download the AD9610BH datasheet PDF?
The official AD9610BH documentation starts at the Analog Devices product page, which links to the AD9610 technical documentation. A separate datasheet index also exposes an AD9610BH PDF and an AD9610 data sheet. Use the Analog Devices page as the primary source for revision-controlled documentation, and consult the PDF for connection details, electrical characteristics, distortion measurements, and application guidance.
Where can I find the AD9610BH pinout and package drawing?
The AD9610BH uses a 12-pin TO-8 through-hole package. Its package and pin information should be taken from the pin-description table and mechanical drawing in the Analog Devices datasheet, with the 12-pin package diagram used to cross-check numbering during PCB layout. The manufacturer product page is the authoritative starting point, while datasheet indexes provide direct PDF access and package illustrations.
What applications are suitable for the AD9610BH?
The AD9610BH fits high-speed analog signal-chain applications that benefit from fast settling, wide bandwidth, and low distortion. Analog Devices identifies Flash driving among the product's applications, while its DC-coupled architecture also suits ADC drivers, communications receivers, instrumentation, and precision measurement circuits. The selected application should remain within the datasheet's supply, swing, bandwidth, output-current, and stability limits.
Is the AD9610BH suitable for ADC input driving?
Yes, the AD9610BH can be suitable for ADC input driving because it combines wide bandwidth with fast settling and low distortion. Its DC-coupled signal path can preserve low-frequency information without a coupling capacitor. The ADC interface must still be checked for required full-scale range, settling accuracy, capacitive loading, and allowed kickback before the amplifier configuration is approved.
What can replace the AD9610BH on the same PCB?
The AD9610 base-family device is the closest confirmed same-family option, but a direct drop-in replacement requires verification of the package suffix, pin functions, electrical limits, and temperature grade. The available cross-reference results do not identify five validated pin-to-pin replacements. Engineers should therefore treat a candidate as drop-in only after comparing the manufacturer pinout and electrical tables rather than relying on broad functional similarity.
Is there a verified cross-brand drop-in equivalent for the AD9610BH?
No cross-brand drop-in equivalent for the AD9610BH is confirmed by the available cross-reference results. A valid replacement must preserve the 12-pin TO-8 footprint, pin-to-pin connectivity, supply range, input and output swing, bandwidth, settling behavior, and required noise and distortion characteristics. Broad similarity in gain-bandwidth product alone is insufficient for a direct replacement because stability and output-drive requirements can differ significantly.
When should I choose AD9610BH instead of a general-purpose op amp?
Choose the AD9610BH when the signal path needs the combination of wide bandwidth, fast settling, DC coupling, and low distortion that the Analog Devices AD9610 family is designed to provide. A general-purpose op amp may be adequate for lower-frequency precision signals, but it may not preserve large-amplitude, high-speed transitions as accurately. Confirm the required gain, bandwidth, slew rate, settling window, output swing, and load before selection.
AD9610BH vs AD9610: which part should be selected?
The AD9610BH is the specified orderable member of the AD9610 family, while the base AD9610 denotes the broader family identifier. Selection should depend on the exact suffix, package, temperature grade, and lifecycle status of the proposed orderable part. Use the manufacturer ordering guide and datasheet to determine whether the base AD9610 designation maps to the same 12-pin TO-8 mechanical configuration.
Is AD9610BH in stock and what is its lead time?
Current stock, minimum order quantity, and production lead time should be requested through the Request a Quote form on this page. The available listing identifies AD9610BH as in stock at one marketplace, but that statement is not a guaranteed allocation for a project quantity. The manufacturer ordering information and a confirmed supplier quotation are the appropriate sources for delivery planning.
Where can I buy the AD9610BH online?
Use the Request a Quote form on this page to request AD9610BH pricing, availability, and a confirmed delivery schedule. A marketplace listing shows the part as in stock, but listing status can change without notice and does not establish allocation for larger production orders. Provide the required quantity, package suffix, inspection requirements, and target delivery date when requesting the quotation.
What is the price of the AD9610BH?
Use the Request a Quote form on this page for the current AD9610BH quotation because project quantity, sourcing conditions, and market availability can change the commercial result. The available marketplace snippet is a starting-price reference rather than a complete quantity-break table for the exact MPN, so it should not be treated as a final customer price. Request a quantity-specific quotation for procurement or budgeting.
Does the AD9610BH need external decoupling or output buffering?
Follow the Analog Devices datasheet for the required supply-decoupling capacitors and output-drive conditions. High-speed amplifiers can require close bypass placement and short feedback paths to preserve stability and dynamic performance. If the next device presents substantial capacitive loading, buffer isolation may be necessary, but the need and topology should be evaluated using the load values and stability guidance in the manufacturer documentation.
Is the AD9610BH compliant with RoHS and automotive AEC-Q100?
The available product material does not explicitly state the AD9610BH's RoHS, REACH, or AEC-Q100 status. Do not infer automotive qualification from a wide-bandwidth or high-speed device description. Check the current Analog Devices declaration, product-page compliance fields, and customer qualification documentation for the exact orderable MPN before using it in a regulated or automotive design.

Data referensi engineering untuk AD9610BH — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the AD9610BH when a high-speed signal chain needs an amplifier that combines wide bandwidth, rapid settling, DC coupling, and low distortion, particularly for Flash interface, ADC drive, instrumentation, or communications applications. The 12-pin TO-8 through-hole package is useful for prototypes and plated-through-hole designs. The base AD9610 is a same-family reference, but the exact suffix must be checked because package construction and temperature grade may differ. Do not approve a generic or cross-brand substitute solely from a similar bandwidth figure; verify pin compatibility, supply range, input and output swing, settling behavior, load stability, noise, and distortion. For slower or lower-precision signals, a general-purpose amplifier may be simpler and more economical, but it may not preserve transient accuracy and spectral purity as effectively.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini AD9610
Brand Analog Devices Analog Devices
Package 12-pin TO-8 12-pin TO-8
Product Type Operational Amplifier Operational Amplifier
Signal Path DC-coupled DC-coupled
Primary Applications Flash driving and high-speed signal amplification Flash driving and high-speed signal amplification

Diferensiator Kunci

  • Fast settling supports accurate capture of rapid signal transitions (vsAD9610)
  • DC-coupled signal path preserves low-frequency information (vsAD9610)
  • Wide-bandwidth design combines low distortion with rapid dynamic performance (vsAD9610)

Catatan Desain

Keep the supply-bypass network and feedback components close to the AD9610BH pins, and minimize the loop area around the amplifier. The 12-pin TO-8 package provides generous physical spacing between leads, but lead inductance can still affect high-frequency behavior. Route high-impedance input and feedback nets away from clocks, power-conversion nodes, and other switching sources. Confirm the manufacturer's recommended grounding and decoupling arrangement before finalizing the PCB.

Evaluate closed-loop stability with the actual source impedance, ADC or flash capacitance, cable loading, and feedback network in place. A wide-bandwidth amplifier can be sensitive to parasitic capacitance introduced by long traces or excessive output loading. If the next stage presents substantial capacitance, use the manufacturer's isolation or compensation guidance rather than adding arbitrary large capacitors, which can alter phase margin and settling behavior.

Do not infer DC accuracy, output swing, input common-mode range, or usable bandwidth from the product description alone. These parameters depend on supply voltage, gain, output load, temperature, and test frequency. Use the manufacturer electrical-characteristics table to establish operating margins, and verify the exact AD9610BH ordering code when creating the BOM so that package and temperature-grade requirements are not changed inadvertently.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance status was not explicitly stated for the AD9610BH. Confirm the exact MPN with Analog Devices before release into RoHS-controlled, REACH-controlled, halogen-free, conflict-minerals, or automotive-qualified programs.

Data disahkan pada: 2026-11-10 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

AD9610BH datasheet AD9610BH datasheet pdf AD9610BH pinout AD9610BH specifications AD9610BH package drawing AD9610BH 12-pin TO-8 Analog Devices AD9610BH AD9610BH replacement AD9610BH equivalent AD9610BH drop-in substitute AD9610BH price AD9610BH stock AD9610BH application circuit AD9610BH ADC driver AD9610BH Flash signal conditioning

Komponen dan Istilah Terkait

Analog Devices AD9610BH AD9610 operational amplifier op amp DC-coupled amplifier voltage-feedback amplifier amplifier IC semiconductor wide-bandwidth amplifier fast-settling amplifier 12-pin TO-8 through-hole package harmonic distortion intermodulation distortion noise density settling time gain-bandwidth product Flash memory interface ADC input driver communications receiver precision instrumentation test and measurement spectral purity
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ