AD9834BRU - 75 MHz 10-Bit DDS IC | Analog Devices
MPN: AD9834BRU ✓ AktifAD9834BRU Ringkasan
A direct digital synthesizer, or DDS, is a programmable waveform generator controlled by a phase accumulator and phase-to-amplitude conversion. The DDS hierarchy places this device among clock and timing integrated circuits, where it converts serial frequency-control data into a digitally synthesized output. Unlike a conventional analog signal source, its frequency can be changed through a serial interface without retuning an inductor or capacitor.
The AD9834BRU supports frequency modulation and phase modulation, while its internal architecture provides sine and triangular output waveforms. Its 10-bit resolution defines the discrete amplitude steps available in the generated output. The 75 MHz headline clock capability permits high-speed phase accumulation, making the device useful for precision excitation, waveform generation, clock synthesis, and frequency-sweep test systems.
The serial programming interface reduces the number of control pins required on small and mixed-signal systems. A master clock establishes the operating reference, and the frequency-control registers determine the synthesized output. The internal comparator provides a separate square-wave output path for clock-generation applications. This combination allows one programmable device to serve both as a sine or triangle source and as a digital clock output.
Typical applications include function generators, automated test equipment, communications test loops, industrial sensor excitation, audio signal generation, and programmable clock products. Its low 20 mW operating-power figure at 3 V is particularly useful in portable instruments and battery-powered test equipment, where every milliwatt contributes to overall energy consumption.
PCB implementation should preserve a quiet return path around the supply and ground pins, place decoupling capacitors close to the device, and route the master-clock signal away from sensitive analog and output nodes. Because the AD9834BRU is specified in a compact TSSOP package, careful solder-paste control and adequate thermal copper are important for reliable assembly and stable operation.
This product page combines the manufacturer specifications with a practical comparison of verified ordering variants, interface and waveform capabilities, package details, application guidance, and design notes that help engineers evaluate the AD9834BRU for programmable waveform and clock-generation designs.
Alternatif penggantian untuk AD9834BRU — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
AD9834BRUZ
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
AD9834BRU-REEL
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
AD9834BRU-REEL7
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
AD9834BRUZ-REEL7
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
AD9834BRU Spesifikasi
| Device Type | Direct Digital Synthesis IC |
| Frekuensi Bawah Maximum | 75 MHz |
| Output Resolution | 10 bit |
| Supply Voltage Range | 2.3 V to 5.5 V |
| Typical Power Consumption at 3 V | 20 mW |
| Supported Waveforms | Sine and triangular |
| Comparator Output | Square wave |
| Frequency Modulation | Supported |
| Phase Modulation | Supported |
| Control Interface | Serial |
| Number of DAC Channels | 1 |
| Paket | 20-lead TSSOP |
| Package Width | 4.40 mm (0.173 inch) |
| Tipe Mounting | Surface mount |
Konfigurasi Pin AD9834BRU
| Pin produk 1 | COMP — Comparator connection |
| Pin produk 2 | VDD — Digital supply voltage |
| Pin produk 3 | VDD — Digital supply voltage |
| Pin produk 4 | VDD — Digital supply voltage |
| Pin produk 5 | SCLK — Serial clock input |
| Pin produk 6 | SDATA — Serial data input |
| Pin produk 7 | FSYNC — Frequency and phase synchronization input |
| Pin produk 8 | MCLK — Master clock input |
| Pin produk 9 | VDD — Digital supply voltage |
| Pin produk 10 | GND — Ground |
| Pin produk 11 | GND — Ground |
| Pin produk 12 | GND — Ground |
| Pin produk 13 | AVDD — Analog supply voltage |
| Pin produk 14 | NC — Not connected |
| Pin produk 15 | VOUT — DDS analog output |
| Pin produk 16 | VOUT — DDS analog output |
| Pin produk 17 | VOUT — DDS analog output |
| Pin produk 18 | GND — Ground |
| Pin produk 19 | GND — Ground |
| Pin produk 20 | GND — Ground |
Aplikasi Umum
AD9834BRU cocok untuk 6 aplikasis: Programmable Function Generator, Automated Test Excitation, Communications Signal Simulation, Programmable Sensor Excitation, Low-Power Clock Generation, Audio Signal Generation.
Programmable Function Generator
The AD9834BRU fits a compact function generator because its DDS core produces sine and triangular waveforms with 10-bit resolution while the on-board comparator supplies a square-wave output. A microcontroller can load frequency and phase-control registers through the serial interface, allowing the output to change without manual tuning. At a 3 V supply, the device consumes 20 mW, which supports portable instruments and educational function generators. The principal design consideration is output-level calibration and analog filtering: the digital waveform is generated internally, but a suitable reconstruction or output-conditioning stage may be required for the intended load.
Automated Test Excitation
In automated test equipment, the AD9834BRU can generate programmable sinusoidal or triangular excitation without analog tuner components. Its 75 MHz clock capability provides a high-speed phase accumulator, while the 10-bit output resolution provides 1024 discrete amplitude levels for the synthesized waveform. Frequency and phase modulation support permits stimulus sweeps and controlled phase shifts during a test sequence. The 2.3 V to 5.5 V operating range simplifies integration across portable and bench instruments, although the instrument designer should characterize signal-to-noise performance, harmonic content, and output accuracy across the intended frequency range.
Communications Signal Simulation
The AD9834BRU is useful for communications test loops that require a tunable reference or modulation source. The serial programming interface permits rapid frequency changes from a host controller, and phase modulation provides an additional degree of control for simulating phase relationships between channels. Sine output is appropriate for baseband excitation or reference generation, while the comparator output can create a digital clock when a square wave is required. Because this is a DDS rather than a laboratory signal generator, engineers should evaluate spur performance, frequency accuracy, and output filtering against the communication standard being emulated before using it in a production test path.
Programmable Sensor Excitation
The AD9834BRU can provide adjustable sinusoidal excitation for bridge, transducer, and industrial sensor testing. Frequency changes are made by writing the DDS control registers rather than by changing a passive resonator, which simplifies repeated sweeps and calibration routines. The 10-bit resolution and 75 MHz clock support programmable stimulus generation across laboratory and factory systems, while 20 mW operation at 3 V benefits portable test fixtures. Designers should place the output near the protected sensor interface, verify that excitation amplitude remains within the sensor rating, and account for the output stage's bandwidth and noise when interpreting measured responses.
Low-Power Clock Generation
The AD9834BRU can act as a programmable clock source by using its square-wave comparator output and loading the desired frequency through the serial interface. This approach is useful where the clock must be digitally adjusted rather than selected with a mechanical divider. The 2.3 V minimum supply voltage and 20 mW power consumption at 3 V are advantageous in portable instruments and embedded measurement products. The clock-quality assessment should cover frequency accuracy, jitter, supply sensitivity, and output rise or fall behavior, because the device is optimized for programmable DDS operation rather than every requirement associated with a dedicated low-jitter clock generator.
Audio Signal Generation
The AD9834BRU can synthesize audio-range sine and triangular signals for tone generators, test tones, and simple audio-effect testing. Its 10-bit resolution gives a defined quantization granularity, while digital frequency control makes it straightforward to create stepped or swept tones. The 3 V operating point and 20 mW consumption support compact, battery-powered audio test tools. Before connecting the output to line-level or speaker circuitry, add the necessary attenuation, reconstruction filtering, and output amplification. The final signal quality will also depend on clock accuracy and the analog output network, which should be evaluated together when the application requires low distortion.
Data referensi engineering untuk AD9834BRU — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | AD9834BRUZ | AD9834BRU-REEL | AD9834BRU-REEL7 | AD9834BRUZ-REEL7 |
|---|---|---|---|---|---|
| Package | 20-lead TSSOP | 20-lead TSSOP - same | 20-lead TSSOP - same | 20-lead TSSOP - same | 20-lead TSSOP - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Device Type | Direct Digital Synthesis IC | Direct Digital Synthesizer | Direct Digital Synthesizer | Direct Digital Synthesizer | Direct Digital Synthesizer |
| Maximum Clock Frequency | 75 MHz | 75 MHz | 75 MHz | 50 MHz listed | 50 MHz listed |
| Output Resolution | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit |
| Supply Voltage Range | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| Power Consumption at 3 V | 20 mW | 20 mW | 20 mW | 40 mW listed | 40 mW listed |
| Control Interface | Serial | Serial | Serial | Serial | Serial |
| Output Waveforms | Sine, triangular, and comparator square wave | Sine, triangular, and comparator square wave | Sine, triangular, and comparator square wave | Sine, triangular, and comparator square wave | Sine, triangular, and comparator square wave |
| Frequency and Phase Modulation | Supported | Supported | Supported | Supported | Supported |
Diferensiator Kunci
- Combines three programmable output paths in one device (vsAD9834BRUZ)
- Supports modulation without a separate analog signal source (vsAD9834BRU-REEL7)
- Low 3 V operating power supports portable instruments (vsAD9834BRUZ-REEL7)
Catatan Desain
Place the bypass capacitors directly beside the AD9834BRU supply and ground pins rather than at the edge of the board. The TSSOP has several VDD and GND connections, so connect them to low-impedance planes and minimize loop area. Keep the master-clock trace away from VOUT and the comparator node, and avoid routing serial data beneath the analog output area to reduce coupling into sensitive waveform nodes.
Use the manufacturer pin-description table when assigning every PCB net, particularly for the repeated VDD, VOUT, and GND pins. The 20-lead TSSOP footprint is compact, so a single-track error can affect both power integrity and signal routing. Confirm component orientation against the package marking, maintain the manufacturer-recommended pad geometry, and inspect the assembled board for solder bridges between adjacent fine-pitch leads.
Treat VOUT as an analog waveform node even though its waveform originates from a digital phase accumulator. Route it away from SCLK, SDATA, FSYNC, and MCLK, and provide the reconstruction or filtering network recommended by the manufacturer when driving higher-impedance loads. Evaluate output amplitude, distortion, and harmonics over the intended frequency range rather than relying only on the nominal 10-bit resolution.
Do not confuse the 75 MHz device clock rating with the maximum analog output frequency or assume that every catalog record carries the same clock wording. Confirm the exact ordering code and its clock-limit entry before release. Also account for the fact that DDS spurs, jitter, and frequency accuracy depend on the master clock and output filtering, so validate the complete generator rather than selecting the part from headline specifications alone.
Informasi Konformitas
The manufacturer product page and distributor listings do not provide an extractable RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration for this ordering code. AEC-Q100 is not applicable because the AD9834BRU is not presented as an automotive-qualified device.