ADF4113BCPZ-RL7 - 4 GHz RF PLL Synthesizer | Analog Devices
MPN: ADF4113BCPZ-RL7 ✓ AktifADF4113BCPZ-RL7 Ringkasan
A frequency synthesizer is an electronic timing component that locks an output frequency to a stable reference frequency. Its signal path is part of the hierarchy wireless transmitter and receiver frequency generation, where a phase-locked loop supports channel selection, frequency translation, modulation, and coherent signal processing. In an RF system, the ADF4113 family is specifically positioned for local oscillators in up-conversion and down-conversion sections of wireless receivers and transmitters.
The ADF4113 uses programmable counters to translate a reference frequency into the required RF output. Its 6-bit A counter supports fine channel spacing, while its 13-bit B counter establishes the broader division ratio. The dual-modulus prescaler provides P or P+1 division behavior, and the programmable reference divider accommodates reference frequencies that require division before entering the phase-frequency detector. Together, these features allow the same architecture to serve multiple RF plans and channel-spacing requirements.
The low-noise digital phase-frequency detector and precision charge pump compare the divided reference with the feedback signal produced by the programmable counter chain. The charge-pump current charges or discharges the loop filter in response to phase and frequency error. Designers select external loop-filter components according to the reference frequency, target output frequency, channel spacing, phase-noise requirements, lock-time objective, and permitted phase-error excursions.
Typical uses include cellular and wireless local oscillators, RF down-converters, RF up-converters, test and measurement signal sources, instrumentation, and frequency-generation subsystems. The ADF4113 is especially relevant when a design requires programmable RF output up to 4 GHz and benefits from integrating the prescaler, counters, phase detector, charge pump, and programmable reference divider into one device.
PCB implementation should follow the manufacturer datasheet land pattern and pin-description table exactly. Keep the RF output route compact, connect the loop-filter components close to the charge-pump and supply pins, provide stable decoupling, and account for the exposed thermal pad when defining the copper and thermal design. Confirm that the selected reference frequency, prescaler value, A-counter value, and B-counter value produce the required channel spacing before committing the register sequence.
This product page combines the manufacturer's architectural description, package information, application guidance, comparison details, and practical implementation notes. It is intended to help engineers determine whether the ADF4113BCPZ-RL7 fits a programmable RF local-oscillator design and to identify the correct family members for an adjacent frequency range.
Alternatif penggantian untuk ADF4113BCPZ-RL7 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
ADF4113HVBCPZ
✅ Drop-InKontak untuk harga
Lihat Datasheet →ADF4112BCPZ-RL7
✅ Drop-InKontak untuk harga
Lihat Datasheet →ADF4113BCPZ-RL7 Spesifikasi
| Product Type | RF phase-locked-loop frequency synthesizer |
| Maximum Synthesis Frequency | 4 GHz |
| Number of Synthesizer Channels | 1 channel |
| Phase-Frequency Detector | Low-noise digital PFD |
| Charge Pump | Precision charge pump |
| A Counter | 6-bit programmable counter |
| B Counter | 13-bit programmable counter |
| Prescaler | Dual-modulus P/P+1 prescaler |
| Reference Divider | Programmable reference divider |
| Paket | 20-lead WFQFN with exposed pad |
ADF4113BCPZ-RL7 20-lead wfqfn with exposed pad Diamant Konfigurasi Panduan
Konfigurasi pin untuk ADF4113BCPZ-RL7 (20-lead wfqfn with exposed pad pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk ADF4113BCPZ-RL7.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
ADF4113BCPZ-RL7 cocok untuk 6 aplikasis: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Converter, RF Down-Converter Local Oscillator, Cellular RF Signal Source, Test and Measurement Signal Source, Instrumentation RF Signal Generator.
Wireless Receiver Local Oscillator
The ADF4113BCPZ-RL7 is appropriate for a programmable receiver local oscillator because its 4 GHz maximum synthesis frequency covers high-frequency RF plans while the integrated 6-bit A counter, 13-bit B counter, and P/P+1 prescaler simplify channel-ratio generation. The phase-frequency detector, charge pump, and programmable reference divider form a complete PLL core around an external loop filter. Designers can program the reference and counter path for the required channel spacing. The principal implementation checks are the reference-input range, prescaler validity at each output frequency, loop stability, and PCB isolation of sensitive RF and filter paths.
Direkomendasikan
Wireless Transmitter Up-Converter
In a transmitter up-converter, the ADF4113BCPZ-RL7 can generate the local-oscillator signal applied to a mixer or modulator. Its 4 GHz ceiling provides useful range for RF carrier plans, while the programmable reference divider and dual-modulus prescaler allow a single reference architecture to support multiple ratios. The programmable A and B counters determine channel granularity, so the register sequence and reference divider must be calculated together. Practical design work includes selecting a stable reference, implementing the charge-pump loop filter, controlling phase noise, and routing the RF output away from sensitive return paths.
Direkomendasikan
RF Down-Converter Local Oscillator
The ADF4113BCPZ-RL7 can support an RF down-converter by producing the local-oscillator reference mixed with an incoming signal. The device's 4 GHz maximum synthesis frequency allows the same architecture to cover multiple conversion plans, and the integrated phase detector, charge pump, counters, and reference divider reduce the number of separately designed PLL blocks. Designers must ensure that the chosen prescaler supports each target frequency and that the external loop filter balances lock behavior against phase noise. Board-level placement of the reference, charge-pump filter, supply decoupling, and RF output route is critical to repeatable conversion performance.
Direkomendasikan
Cellular RF Signal Source
The ADF4113BCPZ-RL7 is suitable for programmable cellular test-signal generation where channel spacing and reference frequency must be translated into an RF carrier. Its 6-bit A counter provides fine-ratio adjustment, the 13-bit B counter supports the integer division requirement, and the P/P+1 prescaler supports fractional-N operation through the dual-modulus counter arrangement. A cellular-oriented implementation should calculate the integer and fractional division values for every required channel, then validate the loop-filter design against lock-time and phase-error limits. Stable reference routing and controlled supply noise are as important as the numerical frequency plan.
Direkomendasikan
Test and Measurement Signal Source
The ADF4113BCPZ-RL7 can form the programmable RF core of a laboratory or production test signal source. Its maximum synthesis frequency of 4 GHz permits RF test points above 1 GHz, while programmable counters permit multiple frequency plans from one reference. The architecture is useful when automated equipment needs to change frequency through the device programming interface rather than replace RF modules. Calibration procedures should account for reference accuracy, lock-state verification, and phase-noise performance. The external loop filter, reference network, and RF output matching require careful design so switching between channels is repeatable and spur levels remain controlled.
Direkomendasikan
Instrumentation RF Signal Generator
For RF instrumentation, the ADF4113BCPZ-RL7 offers a compact way to generate programmable local-oscillator or excitation signals up to 4 GHz. Its integrated phase detector, precision charge pump, reference divider, A and B counters, and dual-modulus prescaler leave the designer to focus on the loop filter, reference quality, and output implementation. This arrangement is advantageous for compact instruments requiring multiple internally generated frequencies. Good practice is to validate lock time across channel changes, monitor the phase-error indicator during calibration, and maintain controlled grounding around the charge pump and reference divider.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ADF4113BCPZ-RL7 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ADF4113HVBCPZ | ADF4112BCPZ-RL7 |
|---|---|---|---|
| Package | 20-lead WFQFN with exposed pad | 20-lead WFQFN with exposed pad | 20-lead WFQFN with exposed pad |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Product Type | RF PLL frequency synthesizer | RF PLL frequency synthesizer | RF PLL frequency synthesizer |
| Maximum Synthesis Frequency | 4 GHz | 4 GHz | 3 GHz |
| A Counter | 6-bit programmable | 6-bit programmable | 6-bit programmable |
| B Counter | 13-bit programmable | 13-bit programmable | 13-bit programmable |
| Prescaler | Dual-modulus P/P+1 | Dual-modulus P/P+1 | Dual-modulus P/P+1 |
| Phase-Frequency Detector | Low-noise digital PFD | Low-noise digital PFD | Low-noise digital PFD |
| Charge Pump | Precision charge pump | Precision charge pump | Precision charge pump |
| Reference Divider | Programmable | Programmable | Programmable |
| Ordering Configuration | -RL7 reel ordering code | HV-specific ordering code | -RL7 reel ordering code |
Diferensiator Kunci
- Higher maximum synthesis frequency than the ADF4112 family member (vsADF4112BCPZ-RL7)
- Exact 4 GHz family alternative for temperature-specific designs (vsADF4113HVBCPZ)
- Integrated programmable PLL signal path (vsDiscrete PLL implementation)
Catatan Desain
Use the package land pattern and exposed-pad connection shown in the official Analog Devices datasheet rather than a generic 20-lead QFN footprint. Place the charge-pump loop-filter components close to their associated pins and keep the route short to reduce parasitic capacitance and pickup. Follow the manufacturer's decoupling guidance, provide a continuous ground reference, and connect the exposed pad according to the recommended copper and thermal layout for the assembled board.
Calculate the complete reference-to-output division ratio before programming the device. The relationship depends on the programmable reference divider, dual-modulus prescaler, 6-bit A counter, and 13-bit B counter. Verify that every required channel produces an integer A value within the prescaler's allowed range. This calculation prevents a theoretically valid family architecture from generating an invalid or unstable output frequency on a particular channel plan.
Do not assume that every lower-frequency ADF411x member is interchangeable in a 4 GHz design. ADF4112BCPZ-RL7 has a 3 GHz maximum, which is 25% below the ADF4113's 4 GHz ceiling, and the device family also varies in temperature and qualification options. Before substitution, compare the exact ordering code, frequency limit, supply range, pin description, exposed-pad connection, register behavior, and package documentation.
Keep the reference input and charge-pump loop-filter region away from the RF output and switching-supply paths. A clean reference reduces phase noise and reference spur generation, while compact filter placement improves loop behavior. Route the output as a controlled impedance path when the board stack-up permits, and provide grounding that does not place high-current return paths directly beneath sensitive PLL nodes.
Informasi Konformitas
The exact environmental and compliance declarations for this ordering code are not stated in the available product information. Review the current Analog Devices product page and material-declaration documentation before release.