ADM2582EBRWZ-RL7 - Isolated RS-485 Transceiver | Analog Devices
MPN: ADM2582EBRWZ-RL7 ✓ AktifADM2582EBRWZ-RL7 Ringkasan
An isolated RS-485 transceiver is a component that integrates a differential bus transceiver with galvanic isolation, allowing data communication between systems with different ground potentials. It typically includes an integrated isolated power supply, such as isoPower, to provide power to the secondary side without an external transformer. This category sits within the broader hierarchy of interface ICs, specifically under RS-485/RS-422 transceivers, and is essential for industrial automation, building control, and instrumentation where ground loops and noise immunity are critical.
Key features include a 2.5kVrms isolation rating, 16Mbps data rate, ±15kV ESD protection, and a common-mode transient immunity (CMTI) of 25kV/µs. The device operates from a single 5V supply and includes an integrated transformer driver, eliminating the need for external components. It supports both full-duplex and half-duplex operation, with a wide operating temperature range of -40°C to +85°C.
The ADM2582E uses Analog Devices' proprietary iCoupler technology for signal isolation and isoPower for isolated power transfer. This architecture provides reliable isolation with low power consumption and high data integrity. The integrated DC-to-DC converter simplifies PCB design and reduces board space compared to discrete isolation solutions.
Typical applications include industrial fieldbus networks, PROFIBUS, Modbus, building automation, and motor control systems. The high CMTI and ESD protection make it suitable for harsh environments where transient voltages and ground potential differences are common.
When designing with this device, ensure proper PCB layout with adequate creepage and clearance distances for the isolation barrier. The integrated power supply requires careful decoupling on both sides of the isolation barrier to maintain performance.
Alternatif penggantian untuk ADM2582EBRWZ-RL7 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian ADM2582EBRWZ-RL7 (sama faktor bentuk dan footprint) — berbeda di dalam Supply Voltage, Data Rate, Number of Channels, Package, Common-Mode Transient Immunity.
ADM2587EBRWZ-REEL7
✅ Drop-In✗ Habis Stok
$6.8409 / Satuan
Lihat Datasheet →ADM2582EBRWZ
✅ Drop-InKontak untuk harga
Lihat Datasheet →ADM2483BRWZ
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan✗ Habis Stok
$3.8182 / Satuan
Lihat Datasheet →ADM2483BRWZ-RL7
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →ISO3082DW
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
ADM2582EBRWZ-RL7 Spesifikasi
| Isolation Voltage | 2500 Vrms |
| Laju Data | 16 Mbps |
| Number of Channels | 2 |
| CMTI | 25 kV/µs |
| ESD Protection | ±15 kV (HBM) |
| Tegangan Pemuat | 5 V |
| Duplex Mode | Full/Half |
| Paket | 20-SOIC (0.295", 7.50mm Width) |
| Suhu Kerja | -40°C to +85°C |
| Isolation Technology | iCoupler + isoPower |
| Number of Drivers | 1 |
| Number of Receivers | 1 |
| Status RoHS | Compliant |
| Tipe Mounting | Surface Mount |
Konfigurasi Pin ADM2582EBRWZ-RL7
| Pin produk 1 | VCC — Logic side supply voltage (5V) |
| Pin produk 2 | GND — Logic side ground |
| Pin produk 3 | TXD — Transmit data input |
| Pin produk 4 | RXD — Receive data output |
| Pin produk 5 | DE — Driver enable |
| Pin produk 6 | RE — Receiver enable |
| Pin produk 7 | A — Non-inverting bus line |
| Pin produk 8 | B — Inverting bus line |
| Pin produk 9 | GND — Bus side ground |
| Pin produk 10 | VISO — Isolated supply output |
Aplikasi Umum
ADM2582EBRWZ-RL7 cocok untuk 6 aplikasis: Industrial Fieldbus Networks, Building Automation, Motor Control Systems, Instrumentation, Power Utility Monitoring, Transportation Systems.
Industrial Fieldbus Networks
The ADM2582EBRWZ-RL7 is ideal for industrial fieldbus networks like PROFIBUS and Modbus, where high data rates up to 16Mbps and robust isolation are required. Its integrated isoPower eliminates the need for external DC-DC converters, simplifying design and reducing board space. The ±15kV ESD protection ensures reliability in harsh industrial environments with frequent transient voltages.
Direkomendasikan
Building Automation
In building automation systems, the ADM2582EBRWZ-RL7 provides reliable RS-485 communication for HVAC controllers, lighting systems, and access control panels. Its 2500Vrms isolation protects against ground potential differences between floors and buildings. The wide operating temperature range of -40°C to +85°C ensures operation in unconditioned spaces.
Direkomendasikan
Motor Control Systems
The ADM2582EBRWZ-RL7 is used in motor control systems to communicate between the controller and drives over long distances. Its high CMTI of 25kV/µs rejects common-mode transients from motor switching, preventing data corruption. The integrated isolation eliminates ground loops, improving system reliability.
Direkomendasikan
Instrumentation
For precision instrumentation, the ADM2582EBRWZ-RL7 provides isolated RS-485 communication between sensors and data acquisition systems. Its low-jitter data transmission and high isolation ensure accurate data transfer in noisy environments. The integrated power supply reduces external component count, simplifying PCB layout.
Direkomendasikan
Power Utility Monitoring
In power utility monitoring, the ADM2582EBRWZ-RL7 enables safe communication between high-voltage equipment and control rooms. The 2500Vrms isolation protects operators and low-voltage electronics from dangerous transients. Its high data rate supports real-time monitoring of grid parameters.
Direkomendasikan
Transportation Systems
The ADM2582EBRWZ-RL7 is suitable for transportation systems such as railway signaling and traffic control, where reliable communication over long distances is critical. Its robust ESD protection and wide temperature range ensure operation in outdoor environments. The integrated isolation prevents ground loops between different subsystems.
Direkomendasikan
Data referensi engineering untuk ADM2582EBRWZ-RL7 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ADM2587EBRWZ-REEL7 | ADM2483BRWZ | ISO3082DW |
|---|---|---|---|---|
| Package | 20-SOIC_W | 20-SOIC_W | 20-SOIC_W | 20-SOIC_W |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Isolation Voltage | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms |
| Data Rate | 16 Mbps | 16 Mbps | 500 kbps | 20 Mbps |
| Integrated Power | Yes | Yes | No | No |
| ESD Protection | ±15 kV | ±15 kV | ±15 kV | ±16 kV |
| CMTI | 25 kV/µs | 25 kV/µs | 25 kV/µs | 50 kV/µs |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
Diferensiator Kunci
- Integrated isoPower eliminates external DC-DC converter (vsISO3082DW)
- Higher data rate than ADM2483BRWZ (vsADM2483BRWZ)
- Same package and pinout as ADM2587E (vsADM2587EBRWZ-REEL7)
Catatan Desain
Ensure proper creepage and clearance distances for the isolation barrier. The ADM2582E requires at least 8mm creepage for 2500Vrms isolation. Place the isolation barrier in a straight line and avoid routing traces across it.
Decouple the VCC and VISO pins with 0.1µF and 10µF capacitors close to the pins. The integrated isoPower converter can generate switching noise; use a ferrite bead on the VCC input if needed.
Keep the bus lines (A and B) as short as possible and use twisted-pair cabling. Terminate the bus with appropriate resistors (typically 120Ω) to match the characteristic impedance and reduce reflections.
Informasi Konformitas
RoHS compliant per distributor data. Other compliance info not specified in provided data.
