ADS821U-1 - 10-Bit 40-MSPS ADC | Texas Instruments | SOIC-28
MPN: ADS821U-1 ✓ AktifADS821U-1 Ringkasan
An analog-to-digital converter translates a continuous analog voltage into a digital code. In the ADS821U-1, the internal sample-and-hold mechanism acquires the input before a 10-bit pipelined conversion stage generates a digital result. A parallel output interface exposes the conversion code directly to a digital system, while configurable input architecture allows the converter to accept either differential or single-ended signals.
The principal headline specifications are 10-bit resolution, 40 MSPS conversion throughput, and operation from a single +5 V supply. The 28-pin SOIC package provides a conventional surface-mount footprint suitable for instrumentation, communications, industrial control, and signal-acquisition designs. The converter also includes an internal reference and an integrated track-and-hold function, reducing the number of external analog support functions required in a basic design.
The pipelined architecture supports conversion throughput suitable for waveform sampling, digital oscilloscope, communications, and closed-loop measurement systems. Resolution and sampling rate should be evaluated together: 40 MSPS permits substantial time-domain resolution, while the 10-bit output represents 1,024 discrete codes. Differential operation can improve signal-to-noise performance when the source can provide a complementary signal, while single-ended operation simplifies lower-complexity front ends.
Because the ADS821U-1 uses a parallel output interface, PCB layout must minimize data-bus timing skew and keep analog and digital return paths appropriately separated. Input, reference, and decoupling connections should follow the pin-description table and recommended-layout guidance in the manufacturer datasheet. Adequate trace length matching is particularly important when using the differential input configuration.
The principal design trade-off is that 10-bit resolution limits theoretical quantization resolution to approximately 1 LSB of the selected full-scale input range. Applications requiring greater dynamic range may prefer a higher-resolution ADC, while applications requiring a compact, +5 V, 40-MSPS converter with parallel output can benefit from the integrated feature set. The -1 ordering suffix should be confirmed against purchasing documentation before production release because its exact commercial conditions are not stated on the manufacturer product page excerpt.
This page combines the manufacturer product description with package and lifecycle details, practical ADC layout guidance, technical comparisons, and direct sourcing support. It also provides a structured path to request current availability, lead time, and commercial terms for the exact ADS821U-1 ordering code through the Request a Quote form on this page.
Alternatif penggantian untuk ADS821U-1 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian ADS821U-1 (sama faktor bentuk dan footprint) — berbeda di dalam Architecture, Package.
ADS821U
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →ADS821U-1 Rating Maksimal & Karakteristik Listrik
| Resolusi | 10 bit |
| Conversion Rate | 40 MSPS |
| Number of Analog Inputs | 1 input |
| Input Architecture | Single-ended or differential |
| Tegangan Pemuat | +5 V |
| Number of Supply Rails | 1 |
| Architecture | Pipelined |
| Process Technology | Small-geometry CMOS |
| Track-and-Hold | Internal |
| Reference | Internal |
| Power-Down Feature | Internal |
| Output Interface | Parallel |
| Paket | 28-pin SOIC (DW) |
| Tipe Mounting | Surface mount |
ADS821U-1 28-pin soic (dw) Diamant Konfigurasi Panduan
Konfigurasi pin untuk ADS821U-1 (28-pin soic (dw) pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk ADS821U-1.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
ADS821U-1 cocok untuk 6 aplikasis: Digital Oscilloscope and Waveform Acquisition, Industrial Sensor Signal Conditioning, Communications Receiver Sampling, Closed-Loop Control and Data Acquisition, Test and Measurement Instrumentation, Audio and Vibration Monitoring.
Digital Oscilloscope and Waveform Acquisition
The ADS821U-1 is appropriate for high-speed waveform acquisition because its 40-MSPS pipelined conversion rate and 10-bit output provide 1,024 digital levels per sample. Place the converter between an appropriately conditioned analog front end and an FPGA or processor that captures its parallel output. The internal track-and-hold and reference simplify the conversion chain, while the 28-pin SOIC package supports conventional surface-mount routing. The main trade-off is resolution: designs requiring substantially more than 10-bit dynamic range should consider a higher-resolution ADC, and input bandwidth and acquisition timing must be matched to the target signal.
Direkomendasikan
Industrial Sensor Signal Conditioning
ADS821U-1 can digitize sensor signals in industrial measurement systems that need a compact 10-bit, 40-MSPS sampling stage. Its single-ended or differential input configuration supports both grounded sensors and bridge-style or complementary analog sources, while the internal track-and-hold and reference reduce the number of external support blocks. The converter’s parallel output can feed FPGA acquisition logic or a processor interface. Before deployment, verify the exact temperature grade, analog input range, common-mode limits, and isolation strategy because those conditions determine whether the ADS821U-1 ordering code is suitable for the equipment enclosure.
Direkomendasikan
Communications Receiver Sampling
The 40-MSPS throughput of ADS821U-1 makes it relevant to communications receivers that require direct conversion of a conditioned IF or baseband waveform into parallel digital samples. Its configurable input architecture allows a designer to select differential operation for improved signal integrity when the analog source supports it, or single-ended operation for a simpler receiver path. The pipelined architecture and internal track-and-hold support repeated sampling, while the 10-bit converter establishes a clear balance between speed and resolution. RF filtering, gain control, input bandwidth, and digital carrier processing must be designed around the converter’s specified operating limits.
Direkomendasikan
Closed-Loop Control and Data Acquisition
ADS821U-1 can serve as the measurement element in fast closed-loop control, actuator monitoring, or laboratory data-acquisition systems. A 40-MSPS sampling rate allows the controller to observe rapidly changing feedback signals, and the parallel interface can transfer each 10-bit code directly into FPGA logic. Differential input can help reject common-mode disturbance when the sensor or feedback network provides a complementary signal. The implementation must include input protection, anti-alias filtering, reference conditioning, and acquisition timing; the 10-bit resolution also limits the smallest reliably measurable closed-loop error.
Direkomendasikan
Test and Measurement Instrumentation
The ADS821U-1 fits instrumentation that samples analog phenomena at up to 40 MSPS and presents the converted result through a parallel digital bus. This can include transient recorders, signal-characterization equipment, and automated test systems requiring a dedicated sampling converter rather than a slow successive-approximation ADC. Its single +5 V supply and internal track-and-hold, reference, and power-down features simplify system partitioning. Instrument designers should budget analog input bandwidth, clock jitter, acquisition latency, bus timing, and calibration paths, while recognizing that the 10-bit result may limit amplitude accuracy for demanding measurements.
Direkomendasikan
Audio and Vibration Monitoring
ADS821U-1 is suitable for vibration, transient audio, or other time-domain monitoring tasks whose bandwidth falls within the converter’s 40-MSPS sampling capability. The single-ended input option permits a straightforward connection to a biased sensor front end, while differential operation can improve rejection of shared ground noise in multi-channel equipment. The 10-bit code width provides a practical compromise between throughput and resolution for monitoring and event-detection tasks. Designers should include anti-alias filtering, sensor excitation or conditioning, input clamping, and careful grounding, then compare the resulting signal-to-noise performance against the application’s measurement threshold.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ADS821U-1 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ADS821U |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 28-pin SOIC (DW) | 28-pin SOIC (DW) - same identified package |
| Resolution | 10 bit | 10 bit |
| Conversion Rate | 40 MSPS | 40 MSPS |
| Number of Analog Inputs | 1 input | 1 input |
| Input Architecture | Single-ended or differential | Single-ended or differential |
| Supply Voltage | +5 V | +5 V |
| Architecture | Pipelined | Pipelined |
| Output Interface | Parallel | Parallel |
| Ordering-Suffix Detail | ADS821U-1 | ADS821U; exact commercial difference requires ordering-table verification |
Diferensiator Kunci
- Balanced 10-bit resolution and high sampling throughput (vsADS821U)
- Integrated converter functions simplify the analog front end (vsADS821U)
- Configurable input supports different source architectures (vsADS821U)
Catatan Desain
Follow the recommended PCB layout in the Texas Instruments ADS821 manufacturer datasheet. Keep the analog input traces short and controlled, place the specified bypass capacitors close to their associated supply pins, and route the 10-bit parallel output bus away from sensitive input and reference paths. Maintain suitable grounding beneath the converter and use a ground strategy that minimizes return-current coupling between the analog and digital sections. Because the pinout is not reproduced here, assign every net from the manufacturer pin-description table rather than from a generic 28-pin ADC drawing.
Treat the parallel output as a synchronous digital interface even though the converter does not use a differential clock. Match output trace lengths within the receiver’s setup-and-hold allowance, minimize stub lengths, and place any required termination close to the driver. Account for propagation-delay skew across all 10 data bits plus the associated output-valid timing. If the converter is operated in differential-input mode, preserve symmetry in the analog traces and verify the allowable common-mode range from the manufacturer datasheet.
Use the specified single +5 V supply and the manufacturer-specified bypass network at the converter. Provide adequate local energy for rapid sampling and output switching, and keep supply and ground return paths short to limit disturbance on the analog reference node. Do not substitute a general supply-decoupling value for the datasheet recommendation. Validate the design with a load transient and analog-noise measurement because the 40-MSPS operation can create fast current edges that couple into the input and reference circuitry if grounding is poorly organized.
Do not assume that ADS821U, ADS821U-1, or an ADC with a similar resolution is automatically interchangeable. Verify the 28-pin SOIC footprint, +5 V supply, analog input range, differential-input common-mode limits, output coding, acquisition timing, temperature grade, and qualification status. The -1 suffix meaning is not stated in the indexed manufacturer excerpt. Before production substitution, compare the complete manufacturer ordering table and perform a pin-by-pin and timing-by-timing review against the schematic and layout.
Informasi Konformitas
The indexed manufacturer and distributor excerpts do not state the exact ADS821U-1 compliance status. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations from the current manufacturer product documentation before production release.