ADSP-2171BS-104 - 16-Bit DSP Microcomputer | Analog Devices
MPN: ADSP-2171BS-104 ✓ AktifADSP-2171BS-104 Ringkasan
A digital signal processor, or DSP, is a specialized microprocessor architecture designed to execute filtering, correlation, Fourier analysis, modulation, and other mathematically intensive tasks efficiently. The ADSP-2171 belongs to the broader embedded processor and semiconductor hierarchy, combining a program sequencer, program and data memory systems, address generators, flags, serial interfaces, and host-port logic on one integrated circuit. Its 16-bit DSP architecture and 30 ns instruction cycle time support real-time numeric workloads.
The ADSP-2171 family is manufactured using a high-speed, double-metal, low-power CMOS process. The ADSP-2171BS-104 includes program ROM and program RAM resources, external address and data buses, two serial ports, and a host interface. These resources allow the processor to serve as the central controller in communications, industrial control, audio, instrumentation, and embedded DSP systems where both control logic and high-speed arithmetic are required.
The 128-pin TQFP package provides the external bus, serial interface, host interface, clock, power, and control signals required by the ADSP-2171 architecture. The suffix BS-104 identifies the specific package, temperature, and ordering configuration used by this device. Confirm the exact ordering code and environmental limits against the Analog Devices ADSP-2171 product documentation before releasing a production BOM.
Typical applications include modem and communications control, audio and speech processing, industrial measurement, instrumentation, and real-time control loops. The DSP architecture is useful when an application repeatedly executes filtering, mixing, or numeric transformations rather than general-purpose operating-system code. The external memory and host interfaces also allow the processor to operate with additional peripheral or storage resources.
When designing a circuit around the ADSP-2171BS-104, follow the manufacturer’s pin description and recommended decoupling requirements in the datasheet. Place power and ground connections directly to the relevant pins, route high-current paths with low loop area, and keep sensitive clock and data traces away from switching nodes. Validate signal timing, address decoding, serial-port configuration, and external memory behavior on the final board.
This page consolidates the device’s core identity, package information, practical application context, sourcing guidance, and engineering considerations. It is intended to help designers determine whether the ADSP-2171BS-104 fits a new DSP design and to identify the technical points that require confirmation from the manufacturer documentation.
Alternatif penggantian untuk ADSP-2171BS-104 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
ADSP-2172BS-104
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
ADSP-2173BS-104
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
ADSP-2171BS-104 Spesifikasi
| Device Type | Single-chip DSP microcomputer |
| Processor Architecture | 16-bit digital signal processor |
| Maximum Instruction Rate | 33 Mips |
| Instruction Cycle Time | 30 ns |
| Tegangan Pemuat | 5 V |
| Serial Port Count | 2 |
| Host Port | 1 |
| Program Memory | ROM x 24 and RAM x 24 architecture |
| External Interface | External address bus and data bus |
| Paket | 128-pin TQFP |
| Process Technology | High-speed, double-metal, low-power CMOS |
| Tipe Mounting | Surface mount |
ADSP-2171BS-104 128-pin tqfp Diamant Konfigurasi Panduan
Konfigurasi pin untuk ADSP-2171BS-104 (128-pin tqfp pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk ADSP-2171BS-104.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
ADSP-2171BS-104 cocok untuk 6 aplikasis: Communications Signal Processing, Audio and Speech Processing, Industrial Measurement and Control, Instrumentation Signal Processing, Modem and Data-Link Controller, Motor and Motion Control.
Communications Signal Processing
The ADSP-2171BS-104 fits communications controller designs that combine real-time numeric processing with host interaction and serial peripherals. Its 16-bit DSP architecture, 33 Mips instruction rate, and 30 ns instruction cycle are suited to filtering, modulation, demodulation, and other repeated arithmetic operations. Two serial ports can support independent data channels, while the host port and external address and data buses allow a host processor or external memory to extend system capability. Board-level implementation should verify serial timing, clocking, logic levels, memory access timing, and reset sequencing against the Analog Devices datasheet.
Direkomendasikan
Audio and Speech Processing
The ADSP-2171BS-104 is appropriate for embedded audio and speech-processing blocks that require fast, deterministic multiply-accumulate operations. Its DSP-oriented architecture and 33 Mips execution capability support filters, mixing, equalization, spectral calculations, and voice-processing chains without relying on a general-purpose operating system. The host port provides a practical control path for configuration, while external buses can connect memory or specialized peripherals. Designers should allocate timing margin for instruction throughput, avoid placing memory or serial routing through long noisy paths, and validate the final clock tree and external memory behavior.
Direkomendasikan
Industrial Measurement and Control
The ADSP-2171BS-104 can serve as the DSP core in industrial measurement and real-time control systems where filtering, sensor conditioning, and numeric computation must execute predictably. The 16-bit architecture is relevant to transducers and control loops that require repeatable arithmetic, while the external address and data buses provide expansion for memory, registers, or peripheral logic. Two serial ports can reduce the number of dedicated communication devices required by the subsystem. Production implementations should separate analog and digital grounding appropriately, use deterministic clocking, and confirm the processor’s electrical limits and thermal performance for the enclosure environment.
Direkomendasikan
Instrumentation Signal Processing
The ADSP-2171BS-104 is a strong candidate for instrumentation that performs continuous numerical processing, including weighting, compensation, correlation, or frequency-domain calculations. Its 30 ns instruction cycle and 33 Mips advertised instruction rate support deterministic workloads, while the host port allows a supervisory controller to load commands and retrieve results. External address and data buses simplify expansion when algorithms require additional memory or peripheral capture. For laboratory or field equipment, preserve analog input integrity, provide clean references and supplies, and test worst-case processor and peripheral loading before finalizing the power and clock design.
Direkomendasikan
Modem and Data-Link Controller
The ADSP-2171BS-104 is applicable to modem and data-link controller designs that combine protocol-facing serial communication with intensive real-time arithmetic. Two serial ports support data movement and control or status communication, and the DSP architecture is suited to equalization, filtering, modulation, and symbol processing. The host port and external buses allow the processor to operate within a larger embedded control system rather than as an isolated component. Firmware development should account for bus contention, timing between serial services and algorithm deadlines, and graceful handling of clock, reset, and power sequencing during startup and shutdown.
Direkomendasikan
Motor and Motion Control
The ADSP-2171BS-104 can support embedded motion-control functions that combine fast numeric computation with external bus and serial connectivity. The processor architecture is well suited to loop calculations, transformations, filtering, and compensation functions, while the 30 ns instruction cycle supports deterministic task execution. A host controller can manage configuration and supervisory functions through the host port, and the external buses can connect position or feedback peripherals. The analog and mixed-signal sections of the board require careful partitioning, while the digital core needs stable clocking, adequate decoupling, and verified timing margins for real-time loop execution.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ADSP-2171BS-104 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ADSP-2172BS-104 | ADSP-2173BS-104 |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 128-pin TQFP | 128-pin TQFP | 128-pin TQFP |
| Processor Class | 16-bit DSP microcomputer | ADSP-217x family DSP microcomputer | ADSP-217x family DSP microcomputer |
| Instruction Cycle Time | 30 ns | 30 ns for the documented ADSP-217x family | 30 ns for the documented ADSP-217x family |
| Process Technology | High-speed, double-metal, low-power CMOS | High-speed, double-metal, low-power CMOS for the documented ADSP-217x family | High-speed, double-metal, low-power CMOS for the documented ADSP-217x family |
| Ordering Suffix | BS-104 | BS-104; verify exact ordering configuration | BS-104; verify exact ordering configuration |
Diferensiator Kunci
- Uses the ADSP-2171 architecture within a three-device ADSP-217x family (vsADSP-2172BS-104)
- Explicit 128-pin TQFP package and 5 V operating description (vsADSP-2172BS-104)
- Dedicated ADSP-2171 implementation rather than an ADSP-2173 variant (vsADSP-2173BS-104)
Catatan Desain
Assign every PCB connection directly from the Analog Devices pin-description table for the ADSP-2171BS-104. The 128-pin TQFP provides fine-pitch external-bus, serial-port, host-port, clock, power, and control connections, so a single routing error can affect several peripheral functions. Keep the external address and data bus topology consistent with the supported memory and peripheral arrangement, and route high fan-out signals with appropriate drive and termination strategies.
Use the power pins and decoupling arrangement specified in the manufacturer datasheet. Place the required bulk and high-frequency capacitors close to their associated supply and ground pins, minimize supply-loop area, and separate switching or high-current return paths from the processor’s clock and data routing. Estimated: actual regulator and capacitor sizing depends on supply impedance, clock rate, bus loading, peripheral activity, and allowed voltage ripple, so obtain those values before making component selections.
Maintain a continuous clock distribution and treat address, data, serial, and host-port signals as potentially timing-sensitive. Avoid stubs, unnecessary test pads, and long parallel routes that can increase capacitance and skew. For external-memory designs, validate write and read timing with the actual memory speed, bus loading, board topology, and processor operating state rather than relying only on nominal instruction timing.
Do not substitute an ADSP-2172 or ADSP-2173 solely because it belongs to the same family. Compare the complete pin descriptions, processor architecture, register definitions, memory resources, serial-port behavior, host interface, electrical characteristics, and ordering information. Firmware written for the ADSP-2171 may require source, assembly, linker, or timing changes even when a related device uses a similar package.
Informasi Konformitas
Compliance declarations are not stated in the verified excerpts. Confirm current material and environmental declarations with Analog Devices before release to production.