ADUM1300ARWZ-RL7 - 3-Ch 2500Vrms Digital Isolator | Analog Devices
MPN: ADUM1300ARWZ-RL7 ✓ AktifADUM1300ARWZ-RL7 Ringkasan
Digital isolators are components that transmit digital signals across an isolation barrier, providing galvanic isolation to protect sensitive circuitry from high voltages, ground loops, and noise. They are essential in industrial, medical, and communication systems where safety and signal integrity are critical. The ADUM1300 uses monolithic transformers and high-speed CMOS, offering superior performance compared to traditional optocouplers, such as higher data rates, lower power consumption, and better reliability.
Key features include a common-mode transient immunity (CMTI) of 25 kV/µs, ensuring reliable operation in noisy environments. The device supports a wide operating temperature range of -40°C to +105°C, making it suitable for industrial applications. The iCoupler technology eliminates the need for LEDs and photodiodes, simplifying design and improving long-term stability.
The ADUM1300ARWZ-RL7 is designed for general-purpose isolation in applications such as industrial fieldbus communication, isolated SPI/UART interfaces, and motor control. Its 1 Mbps data rate is adequate for many control and monitoring signals, while the 2500 Vrms isolation rating provides robust protection. The wide supply range allows interfacing between different voltage domains, such as 3.3 V and 5 V systems.
When designing with this isolator, ensure proper PCB layout with adequate creepage and clearance distances to maintain the isolation rating. Bypass capacitors should be placed close to the VDD pins on both sides. The device is RoHS compliant and lead-free, meeting environmental standards.
Typical applications include isolated data acquisition, power inverter gate drive isolation, and medical equipment where patient safety requires galvanic isolation. The ADUM1300ARWZ-RL7 is a reliable choice for engineers seeking a compact, high-performance digital isolator.
Alternatif penggantian untuk ADUM1300ARWZ-RL7 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian ADUM1300ARWZ-RL7 (sama faktor bentuk dan footprint) — berbeda di dalam Technology.
ADUM1300ARWZ
✅ Drop-InKontak untuk harga
Lihat Datasheet →ADUM1300ARWZ-RL
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ADUM1300WSRWZ-RL
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ISO7131
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
SI8610
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
MAX14130
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
ADUM1300ARWZ-RL7 Spesifikasi
| Number of Channels | 3 |
| Isolation Voltage | 2500 Vrms |
| Laju Data | 1 Mbps |
| Common-Mode Transient Immunity (CMTI) | 25 kV/µs |
| Supply Voltage (VDD1/VDD2) | 2.7 V to 5.5 V |
| Rentang Suhu Kerja | -40°C to +105°C |
| Paket | 16-SOIC (0.295", 7.50mm Width) |
| Tipe Mounting | Surface Mount |
| Channel Configuration | 3/0 (3 forward, 0 reverse) |
| Technology | iCoupler |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Konfigurasi Pin ADUM1300ARWZ-RL7
| Pin produk 1 | VDD1 — Supply voltage, side 1 |
| Pin produk 2 | GND1 — Ground, side 1 |
| Pin produk 3 | VIA — Input channel A |
| Pin produk 4 | VIB — Input channel B |
| Pin produk 5 | VIC — Input channel C |
| Pin produk 6 | GND1 — Ground, side 1 |
| Pin produk 7 | NC — No connect |
| Pin produk 8 | NC — No connect |
| Pin produk 9 | NC — No connect |
| Pin produk 10 | NC — No connect |
| Pin produk 11 | GND2 — Ground, side 2 |
| Pin produk 12 | VOA — Output channel A |
| Pin produk 13 | VOB — Output channel B |
| Pin produk 14 | VOC — Output channel C |
| Pin produk 15 | GND2 — Ground, side 2 |
| Pin produk 16 | VDD2 — Supply voltage, side 2 |
Aplikasi Umum
ADUM1300ARWZ-RL7 cocok untuk 6 aplikasis: Industrial Fieldbus Communication, Isolated SPI/UART Interface, Motor Control and Inverter Gate Drive, Medical Equipment Isolation, Isolated Power Supply Feedback, Data Acquisition and Instrumentation.
Industrial Fieldbus Communication
The ADUM1300ARWZ-RL7 provides galvanic isolation for industrial fieldbus interfaces such as RS-485, CAN, and PROFIBUS. Its 2500 Vrms isolation and 25 kV/µs CMTI ensure reliable data transmission in noisy factory environments. The 1 Mbps data rate is sufficient for most fieldbus protocols, and the wide supply range (2.7 V to 5.5 V) allows interfacing with different logic levels. By isolating the transceiver from the controller, ground loops and voltage spikes are prevented, enhancing system safety and reliability.
Direkomendasikan
Isolated SPI/UART Interface
The ADUM1300ARWZ-RL7 is ideal for isolating SPI or UART communication between microcontrollers and peripheral devices. With three channels, it can isolate the clock, data, and chip-select lines, providing complete galvanic isolation. The 1 Mbps data rate supports standard SPI speeds, and the low propagation delay ensures minimal signal skew. This application is common in motor control, data acquisition, and power conversion systems where the controller and power stage must be electrically isolated.
Direkomendasikan
Motor Control and Inverter Gate Drive
In motor control and inverter applications, the ADUM1300ARWZ-RL7 isolates the low-voltage control circuitry from the high-voltage power stage. Its high CMTI (25 kV/µs) ensures that fast switching transients do not corrupt the control signals. The 2500 Vrms isolation rating provides adequate protection for 230V AC or 400V DC systems. The device's wide operating temperature range (-40°C to +105°C) makes it suitable for industrial drives and HVAC systems.
Direkomendasikan
Medical Equipment Isolation
The ADUM1300ARWZ-RL7 is used in medical devices to provide patient isolation, ensuring safety from electric shock. Its 2500 Vrms isolation rating meets the requirements for many medical standards. The device's low power consumption and high reliability make it suitable for battery-powered and portable medical equipment. It is commonly used in patient monitoring systems, diagnostic devices, and infusion pumps to isolate sensor signals from the main processor.
Direkomendasikan
Isolated Power Supply Feedback
The ADUM1300ARWZ-RL7 can be used to isolate the feedback signal in switched-mode power supplies. By isolating the error amplifier output from the primary-side controller, the power supply can achieve better regulation and safety. The 1 Mbps data rate is sufficient for feedback signals, and the high CMTI ensures stable operation under load transients. This application is common in AC-DC converters, DC-DC converters, and battery chargers.
Direkomendasikan
Data Acquisition and Instrumentation
In data acquisition systems, the ADUM1300ARWZ-RL7 isolates the analog front-end from the digital processing unit, preventing ground loops and noise. Its 2500 Vrms isolation rating protects sensitive measurement circuits from high common-mode voltages. The device's low propagation delay and high CMTI ensure accurate signal transmission. It is used in applications such as industrial process control, laboratory instruments, and environmental monitoring systems.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ADUM1300ARWZ-RL7 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ADUM1300ARWZ | ADUM1300ARWZ-RL | ADUM1300WSRWZ-RL | ISO7131 | SI8610 | MAX14130 |
|---|---|---|---|---|---|---|---|
| Package | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Skyworks Solutions | Maxim Integrated |
| Isolation Voltage | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms |
| Data Rate | 1 Mbps | 1 Mbps | 1 Mbps | 1 Mbps | 1 Mbps | 1 Mbps | 1 Mbps |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Operating Temperature | -40°C to +105°C | -40°C to +105°C | -40°C to +105°C | -40°C to +105°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C |
| Automotive Grade | No | No | No | Yes (AEC-Q100) | No | No | No |
Diferensiator Kunci
- iCoupler technology provides superior reliability compared to optocouplers (vsOptocoupler-based isolators)
- High CMTI of 25 kV/µs (vsISO7131)
- Wide supply voltage range (2.7 V to 5.5 V) (vsSI8610)
Catatan Desain
For optimal performance, place bypass capacitors (0.1 µF) close to the VDD1 and VDD2 pins on both sides of the isolator. Use a solid ground plane under the device to minimize noise. Ensure adequate creepage and clearance distances on the PCB to maintain the 2500 Vrms isolation rating.
Keep the isolation barrier clear of any copper traces or components to avoid reducing the isolation voltage. Route high-voltage and low-voltage traces on opposite sides of the PCB, and maintain a minimum distance of 8 mm between them for 2500 Vrms isolation.
Do not exceed the absolute maximum supply voltage of 7 V on either side. Ensure that the input signals do not exceed the supply voltage. Also, avoid floating unused input pins; tie them to GND or VDD as appropriate to prevent undefined states.
Informasi Konformitas
RoHS compliant per Analog Devices product page. Not AEC-Q100 qualified; automotive variant is ADUM1300WSRWZ-RL.