AK4424ET - 24-Bit Stereo DAC, 192kHz, 2Vrms | AKM
MPN: AK4424ET ✓ AktifAK4424ET Ringkasan
A DAC is a digital-to-analog converter, a semiconductor that converts sampled digital audio data into a continuous analog voltage. Within the signal-chain hierarchy, the AK4424ET sits between a digital audio source and an analog amplifier or line-input stage. Its stereo architecture provides independent left and right conversion paths, while the multi-bit modulator is designed to balance dynamic range, linearity, and reduced-frequency-distortion performance.
The AK4424ET's principal characteristics include 24-bit resolution, a maximum sampling frequency of 192kHz, and an integrated 2Vrms output buffer. The 5V supply architecture simplifies implementation in conventional analog audio equipment. Because the output stage can drive a ground-referenced 2Vrms signal, designers can reduce the number of external line-output stages needed in many consumer and professional audio designs.
The internal charge pump is an important architectural detail. It develops the negative power-supply rail required by the output buffer, allowing the amplifier to swing symmetrical output voltage around the analog ground reference. This topology supports the 2Vrms output specification while keeping the external signal path compact, although board layout must preserve a low-impedance analog ground and isolate sensitive digital, clock, and power connections.
Typical uses include CD and DVD player digital-to-analog stages, portable audio equipment, home-theater receivers, digital mixing consoles, active speakers, and USB or network audio interface boards. It is also suitable for custom high-resolution playback equipment requiring a stereo DAC with integrated analog output buffering rather than an external operational-amplifier stage.
Design the analog supply with short, low-impedance traces and place decoupling capacitors close to the device. Keep the digital interface, clock source, and analog output routing physically separated to reduce crosstalk. The 2Vrms output capability must be checked against downstream amplifier headroom; connecting the converter directly to a full-scale consumer input can clip the receiving stage even when the DAC itself operates within specification.
This page consolidates the verified AK4424ET device description, datasheet access, application guidance, and engineering-oriented selection notes so designers can evaluate the converter before committing it to an audio board layout.
Alternatif penggantian untuk AK4424ET — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian AK4424ET (sama faktor bentuk dan footprint) — berbeda di dalam Maximum Sampling Rate, Modulator Architecture.
AK4424AET
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →AK4424ET Rating Maksimal & Karakteristik Listrik
| Device Type | Stereo digital-to-analog converter |
| Resolusi | 24 bit |
| Maximum Sampling Rate | 192kHz |
| Channel Configuration | 2 channels, stereo |
| Analog Supply Voltage | 5 V |
| Tegangan Output | 2Vrms |
| Output Buffer | Integrated |
| Output Reference | Ground referenced |
| Charge Pump | Integrated, generates internal negative supply rail |
| Modulator Architecture | Multi-bit delta-sigma |
| Packaging | Tape & Reel (TR) |
AK4424ET standard Diamant Konfigurasi Panduan
Konfigurasi pin untuk AK4424ET (standard pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk AK4424ET.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
AK4424ET cocok untuk 6 aplikasis: CD and DVD Player Analog Output, Professional Audio Digital Mixer, USB and Network Audio Interface, Home Theater Receiver DAC Card, Active Speaker and Compact Stereo Amplifier, Portable and High-Resolution Headphone Product.
CD and DVD Player Analog Output
The AK4424ET fits a high-resolution player output stage because it converts 24-bit stereo data at rates up to 192kHz and drives 2Vrms through an integrated buffer. Placing the converter at the end of the digital audio chain removes a discrete line-output stage in many designs. Verify the downstream amplifier's input range, because 2Vrms can exceed the clipping point of some consumer inputs. The charge pump and analog output section should be surrounded by a quiet analog ground plane, while clock and data traces remain separated from the output path.
Direkomendasikan
Professional Audio Digital Mixer
The AK4424ET can provide a stereo line-output function in a digital mixing console or rack-mounted audio processor. Its 24-bit resolution and 192kHz maximum sampling rate suit high-rate studio workflows, while the integrated 2Vrms buffer reduces the analog drive stage required at each output. Design the converter section as a distinct analog island with local supply decoupling and controlled return paths. Confirm the mixer architecture's required output level, channel count, latency behavior, and digital routing before assigning the converter to a particular mix bus.
Direkomendasikan
USB and Network Audio Interface
The AK4424ET is suitable for the stereo analog-output section of a high-resolution USB or network audio interface. Its 192kHz capability supports high-rate playback, and the integrated 2Vrms buffer can feed an output amplifier or headphone-driver chain. The USB controller must supply the required audio format and clock information, while the board layout keeps USB data and switching regulators away from the analog converter. Validate the digital timing, supported master-clock mode, and output-level expectations against the complete interface design.
Direkomendasikan
Home Theater Receiver DAC Card
The AK4424ET can serve as the stereo converter on a home-theater receiver line-output card when 2Vrms is acceptable. The 24-bit resolution and 192kHz sampling-rate capability suit modern surround and stereo sources, while the integrated buffer reduces the number of discrete analog stages on the card. Place the converter near the output connectors to minimize analog trace exposure, and confirm that the receiver's amplifier input does not clip at full scale. Digital ground and power-return design are as important as output routing in this multi-channel environment.
Direkomendasikan
Active Speaker and Compact Stereo Amplifier
The AK4424ET is useful in an active speaker or compact stereo amplifier when a direct 2Vrms source is required. Its integrated output buffer can feed a higher-level power-amplifier input without the usual first-stage gain block, while the multi-bit modulator supports low-distortion playback. Use the output specification to set the downstream gain so that full-scale program material does not clip. Short analog output routing, symmetrical power distribution around ground, and careful clock isolation improve channel-to-channel performance in compact enclosures.
Direkomendasikan
Portable and High-Resolution Headphone Product
The AK4424ET can support the digital-to-analog stage of a portable or high-resolution headphone product when its 5V supply and 2Vrms output match the system architecture. The 24-bit conversion capability preserves detail from high-rate sources, and the integrated buffer may simplify the transition from digital audio to an analog headphone amplifier. Battery-operated designs must account for the converter's supply demand, and a 2Vrms signal may require attenuation before reaching sensitive headphone stages. Confirm the available voltage headroom and analog-output operating conditions in the manufacturer datasheet.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk AK4424ET — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini |
|---|---|
| Brand | Asahi Kasei Microdevices |
| Device Function | Stereo digital-to-analog converter |
| Resolution | 24 bit |
| Maximum Sampling Rate | 192kHz |
| Analog Supply Voltage | 5 V |
| Output Level | 2Vrms |
| Output Buffer | Integrated |
| Channel Count | 2 channels |
| Internal Charge Pump | Yes |
Catatan Desain
Separate the analog output and power-return region from digital data, clock, and switching-supply routing. Keep the converter's local supply-decoupling connections short and place analog signal traces away from high-current digital return paths. The internal charge pump supports ground-referenced 2Vrms output, but poor return-current control can still inject disturbance into the analog output stage.
Do not assume that a 2Vrms converter output is compatible with every amplifier or line input. Check the downstream stage's full-scale input voltage, clipping margin, and input impedance before finalizing the analog path. Excessive gain or an input rated below 2Vrms can clip even though the AK4424ET itself is operating correctly.
Build the 5V analog supply with adequate local decoupling and verify startup behavior in the complete system. Keep switching-regulator components and their high-current loops away from the analog output routing. If the board also derives a 3.3V digital supply, use the converter's datasheet power-up and grounding recommendations to prevent sequencing transients from reaching the analog section.
Informasi Konformitas
No explicit compliance declarations were identified in the verified product information. AEC-Q100 is marked not applicable because this is an audio converter rather than an automotive-qualified device.