TI

AK7730VT 24-Bit 2-Channel ADC | AKM | Precision Conversion

MPN: AK7730VT ✓ Aktif
Tape & Reel (TR) Package
MOQ: 1 |

AK7730VT Ringkasan

The Asahi Kasei Microdevices AK7730VT is a 24-bit, 2-channel analog-to-digital converter designed for precision signal acquisition. The device is supplied in tape-and-reel packaging for automated production lines, with a standard package quantity of 1,000 units. Its dual-channel architecture allows two analog signals to be captured by one converter, which is useful in audio, industrial sensing, instrumentation, and communication equipment.

An ADC is a data-acquisition IC that converts an analog voltage into a digital code for processing, storage, or transmission. Within the broader IC hierarchy, the AK7730VT belongs to the ADC/DAC family and then to the special-purpose data-acquisition converter category. A two-channel, 24-bit converter is particularly relevant when a system must retain high conversion resolution while capturing more than one signal, such as stereo audio or paired sensor channels.

The manufacturer describes the AK7730VT as a compact 24-bit ADC with two conversion channels. Its exact input-voltage range, conversion rate, digital interface format, channel multiplexing behavior, clock requirements, and operating-temperature limits should be taken from the manufacturer datasheet before the device is used in a new design. The product is listed with an EAR99 export classification, MSL 1 handling classification, and HTSUS code 8542.39.0001.

Because this converter is intended for precise signal conversion, the key design questions are interface compatibility, reference-voltage stability, analog front-end headroom, and digital data handling. The two analog channels must be driven within the allowable input range, and the converter clock and digital interface must match the host controller. Decoupling near the supply and reference pins, controlled grounding, and short digital traces help preserve conversion quality.

Typical uses include stereo audio capture, industrial process monitoring, environmental sensing, portable measurement instruments, and communication equipment with two signal paths. In audio systems, the 24-bit resolution provides a substantial numerical range between the minimum and maximum digital codes. In instrumentation, the second channel can monitor a second sensor or provide a reference or status signal alongside the primary measurement.

When replacing AK7730VT in an existing board, verify the package dimensions, exposed-pad or thermal requirements, pin assignment, interface mode, and operating limits against the manufacturer datasheet. A similar converter name is not sufficient evidence of drop-in compatibility because interface, voltage, timing, and layout requirements can differ even within one ADC family.

This page consolidates the manufacturer-linked product identity, ADC resolution and channel count, packaging information, export classification, component availability, and engineering selection considerations for AK7730VT. It also highlights the parameters that require confirmation before schematic capture, PCB layout, and production release.

Alternatif penggantian untuk AK7730VT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

AK7730VT Rating Maksimal & Karakteristik Listrik

Converter Type 24-bit, 2-channel ADC
Resolusi 24 bit
Number of Channels 2 channels
Product Series AK7730A
Manufacturer Asahi Kasei Microdevices/AKM
Package Type Tape & Reel (TR)
Standard Package Quantity 1,000 units
Moisture Sensitivity Level MSL 1 (Unlimited floor life)
Export Control Classification EAR99
HTSUS Code 8542.39.0001

AK7730VT 1,000 units Diamant Konfigurasi Panduan

Konfigurasi pin untuk AK7730VT (1,000 units pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 1,000 units untuk AK7730VT

Tidak ada data diatribut pin yang tersedia untuk AK7730VT.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

AK7730VT cocok untuk 6 aplikasis: Stereo Audio Capture, Industrial Sensor Acquisition, Precision Test and Measurement, Environmental Monitoring, Communication and Baseband Systems, Two-Channel Data Acquisition.

🎧

Stereo Audio Capture

The AK7730VT's two conversion channels make it a natural fit for stereo audio acquisition in digital mixers, active speakers, recording interfaces, and playback equipment. Its stated 24-bit resolution provides a wide numerical range for representing left and right signals, while the shared converter simplifies synchronization between channels. The analog inputs still require suitable gain control, clamping, and anti-alias filtering. Designers should confirm the manufacturer timing diagram, allowed input amplitude, master-clock requirements, and digital framing mode before layout, because channel count and nominal resolution alone do not establish complete audio compatibility.

🏭

Industrial Sensor Acquisition

The AK7730VT can acquire two related sensor outputs for process control, factory monitoring, and condition-monitoring equipment. One channel may carry the primary transducer signal while the second handles a complementary measurement, temperature reference, or diagnostic input. The 24-bit resolution supports fine numerical representation of slowly varying or precisely scaled signals, but input conditioning determines the usable accuracy. Confirm the input range, source-impedance requirements, sampling rate, and digital timing in the manufacturer datasheet, then place anti-alias filters and reference components close to the converter.

🔧

Precision Test and Measurement

A pair of acquisition channels and 24-bit nominal resolution suit bench instruments, portable analyzers, and calibration equipment that must capture low-level or scaled analog inputs. The two channels can sample complementary measurands while sharing the same converter clock, helping maintain consistent timing between readings. Practical performance still depends on the front-end reference, low-noise amplification, protection strategy, and layout separation. Review the manufacturer electrical characteristics and application circuit for input range, sampling behavior, and digital-interface timing before assigning the AK7730VT to a laboratory instrument.

🧩

Environmental Monitoring

The AK7730VT can support two-channel environmental monitoring by digitizing a primary sensor such as temperature, humidity, or gas concentration alongside a reference or status channel. Its nominal 24-bit resolution permits fine-grained digital representation after appropriate transducer scaling and filtering. Because environmental sensors often have slow-moving outputs, the design should still verify the converter's specified sampling-rate and settling requirements. Low-noise analog routing, stable reference voltage, and protection from humidity or condensation are as important as the converter itself.

🌐

Communication and Baseband Systems

The AK7730VT may be evaluated for communication equipment that requires two synchronized analog observation paths, such as I/Q measurement, loopback monitoring, or dual-envelope acquisition. Its two-channel architecture can support matched sampling when the converter provides the required multiplexing and timing. The designer must confirm supported sample rates, input bandwidth expectations, clock-jitter sensitivity, and digital transfer format in the manufacturer datasheet. RF shielding, controlled reference distribution, and careful separation from high-speed digital signals are essential for repeatable measurements.

📡

Two-Channel Data Acquisition

The AK7730VT provides a compact option for two-channel data-acquisition boards where one controller must receive two analog channels through a common converter. This arrangement can reduce the number of discrete converters and simplify synchronization, provided the multiplexing scheme and sampling characteristics meet the application. Use matched front-end channels when accurate channel-to-channel comparison is required, including identical amplifiers, resistors, protection networks, and filter layouts. Verify the digital clock and data framing required by the controller before finalizing the host interface.

What is the AK7730VT?
The AK7730VT is a 24-bit, 2-channel analog-to-digital converter from Asahi Kasei Microdevices. It converts two analog input signals into digital data and is supplied in tape-and-reel packaging with a standard quantity of 1,000 units. The AK7730VT belongs to the AK7730A series. Its sampling rate, input range, digital interface, and clock requirements are identified in the manufacturer datasheet.
How many channels and bits does the AK7730VT have?
The AK7730VT provides two analog conversion channels with a stated resolution of 24 bits. This arrangement allows one converter to capture a pair of related signals, such as left and right audio channels or two matched sensor outputs. The listed 24-bit specification describes the converter resolution; practical system accuracy also depends on analog front-end design, reference quality, noise performance, and digital calibration.
What package does the AK7730VT use?
The AK7730VT is supplied in tape-and-reel packaging, and the standard package quantity is 1,000 units. A distributor listing identifies the physical device as a QFP electronic part, while the AK7730A datasheet listing describes the package as 62 pages. Exact body dimensions, lead pitch, pin count, and exposed-pad details should be confirmed from the manufacturer datasheet before PCB footprint approval.
Where can I download the AK7730VT datasheet?
The AK7730VT datasheet can be reached through the manufacturer product page at akm-semi.com or through the linked datasheet listing on Alldatasheet. The manufacturer document is the preferred source for the pin configuration, electrical characteristics, timing diagrams, digital-interface modes, and recommended application circuit. Use the document revision associated with the AK7730A series when making design decisions.
Where can I find the AK7730VT pinout?
The AK7730VT pin assignment is found in the pin-configuration section of the manufacturer AK7730A datasheet. Confirm analog inputs, reference connections, supply pins, clock inputs, reset or mode controls, and digital outputs against the selected interface option. A distributor listing confirms that technical support and pinout information are available for this device, but the manufacturer pin table remains the authoritative assignment reference.
What applications suit the AK7730VT?
The AK7730VT suits applications that acquire two related analog signals at 24-bit resolution. Typical uses include stereo audio capture, paired industrial sensors, process measurement, environmental monitoring, and portable test equipment. Its dual-channel arrangement can reduce component count and keep both channels on a common converter, provided the signal amplitudes, sampling requirements, and clocking plan match the device characteristics.
What is the best drop-in replacement for the AK7730VT?
The best drop-in replacement is the device with the same package, pin assignment, supply range, reference arrangement, digital interface, and timing behavior as the AK7730VT. A matching converter resolution alone does not establish drop-in compatibility. Confirm the manufacturer pin table and timing specifications, then verify that the candidate operates from the same rails and communicates with the host controller using the same protocol.
Can the AK7730VT be used as a direct replacement for another 24-bit ADC?
The AK7730VT can be considered only after verifying the mechanical and electrical interface of the original device. A 24-bit, two-channel ADC may still differ in pinout, input range, reference voltage, conversion timing, digital protocol, and power requirements. Compare those parameters directly with the AK7730A datasheet before treating the substitution as a drop-in replacement.
AK7730VT versus a generic 24-bit stereo ADC: which is preferable?
The AK7730VT is preferable when its documented interface, timing, and channel arrangement match the system design and the manufacturer support lifecycle is important. A generic 24-bit stereo ADC may cost less or offer a different digital interface, but it is not automatically interchangeable. The decision should compare input range, conversion rate, clocking, SPI or serial-port behavior, power, package, and software configuration requirements.
When should I choose the AK7730VT over another two-channel ADC?
Choose the AK7730VT when you need its documented 24-bit, two-channel conversion capability and the associated manufacturer package and documentation support your design. Select a different ADC when it provides a materially better interface, lower power, faster sampling, lower cost, or a package that fits an existing footprint. The decisive factors are electrical and mechanical compatibility rather than channel count alone.
Is the AK7730VT suitable for precision sensor measurement?
The AK7730VT is suitable for precision sensor measurement when the sensor signal can be conditioned within the device's documented input range and the required sampling rate is supported. Its 24-bit nominal resolution provides a wide digital code range, while the second channel can monitor a complementary sensor or status signal. Sensor excitation, anti-alias filtering, grounding, and reference stability will strongly influence the final measurement accuracy.
How should the AK7730VT analog input network be designed?
Design the analog front end so each signal remains inside the AK7730A input-voltage limits with adequate headroom. Use suitable protection, amplification or attenuation, and anti-alias filtering before the converter inputs. Follow the manufacturer reference circuit for source impedance and sampling-charge requirements, because an unnecessarily high source impedance can degrade acquisition accuracy. Keep analog routing short and separated from switching-node traces.
What power and decoupling layout guidance applies to the AK7730VT?
Place bypass capacitors close to the device supply pins and route them with short, low-inductance connections to the ground plane. Follow the manufacturer recommended capacitor values and voltage ratings rather than substituting arbitrary values. Keep sensitive analog references and signal inputs away from digital return currents and switching regulators. Separate analog and digital return paths where the application permits, then join them at the planned quiet ground point.
Is the AK7730VT available for quotation and order?
The AK7730VT is listed for order and quotation through multiple authorized component channels, and the manufacturer describes it as fully developed and mass-produced. Current inventory, allocation, and lead time can change by market and order quantity. Use the Request a Quote form on this page to request current commercial terms, minimum order quantity, and delivery information for the tape-and-reel format.
What is the lead time for the AK7730VT?
Lead time for the AK7730VT depends on current factory allocation, finished-goods inventory, order quantity, and the requested delivery schedule. A distributor listing identifies a standard package quantity of 1,000 units in tape-and-reel packaging. Request current lead time, production schedule, and minimum order quantity through the Request a Quote form on this page so the commercial answer reflects the latest order conditions.
What key specifications should engineers verify for the AK7730VT?
Engineers should verify the 24-bit resolution, two analog channels, analog input range, maximum conversion rate, reference voltage, supply voltage, digital interface, clocking, and operating-temperature range against the manufacturer datasheet. Package dimensions and pin assignment also require confirmation. These electrical and mechanical parameters determine whether the AK7730VT can be used without schematic, firmware, or PCB-layout changes.

Data referensi engineering untuk AK7730VT — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the AK7730VT when the design needs a documented 24-bit, two-channel ADC and can support its package, input range, clocking, and digital interface. It is especially useful when two related signals must be captured with a common converter or when a product program already uses the AK7730A family. Select a different AKM or competitor ADC when the system requires a materially faster conversion rate, lower power, a different host interface, or a package that already exists on the PCB. For a replacement, do not rely on matching resolution and channel count alone; verify pin assignment, reference and supply voltages, timing, clock requirements, and digital framing. For new designs, obtain the current manufacturer datasheet before committing the schematic, footprint, firmware, and production test plan.

Diferensiator Kunci

  • Documented dual-channel 24-bit conversion (vsAK7738VQ)
  • Production-oriented tape-and-reel presentation (vsAK5522VN)
  • Dedicated special-purpose ADC positioning (vsAK7755EN)

Catatan Desain

Place bypass capacitors and analog protection components close to the AK7730VT. Route analog inputs and reference connections away from digital clocks, serial data lines, and switching power stages. Use a continuous ground plane unless the manufacturer's application circuit requires a deliberate split, and route converter return currents directly to the local ground reference to reduce conversion-dependent error.

Keep the digital clock trace short, continuously referenced to a solid ground plane, and terminated in accordance with the manufacturer's interface guidance. Route the two analog channels symmetrically when accurate comparison between channels is required. Avoid stubs and test-point discontinuities on sensitive analog nodes, and place anti-alias filtering at the input connector or before the converter rather than relying only on digital correction.

Do not select a replacement based only on the 24-bit resolution and two-channel label. Verify package drawing, pin assignment, analog input range, reference voltage, supply rails, conversion timing, clocking, and digital-interface mode against the AK7730A datasheet. Also confirm whether unused pins require defined levels and whether the selected tape-and-reel variant matches the board's assembly process.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The product listing identifies an EAR99 export classification, MSL 1 handling classification, and HTSUS code 8542.39.0001. RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified in the cited product information.

Data disahkan pada: 2026-11-11 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

AK7730VT datasheet AK7730VT datasheet pdf AK7730VT pinout AK7730VT specifications AK7730VT 24-bit ADC AK7730VT 2-channel converter AK7730VT QFP package AK7730VT tape reel AK7730VT equivalent AK7730VT replacement AK7730VT price AK7730VT stock AK7730VT application circuit Asahi Kasei AK7730VT

Komponen dan Istilah Terkait

Asahi Kasei Microdevices Corporation AK7730VT AK7730A 24-bit ADC two-channel ADC analog-to-digital converter data acquisition ADC/DAC integrated circuit semiconductor QFP package tape-and-reel packaging surface-mount device analog input digital interface reference voltage anti-alias filter signal conversion stereo audio capture industrial sensor acquisition MSL 1 EAR99 RoHS REACH
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ