Infineon

CY8C27443-24PXI - 24MHz 8-Bit PSoC 1 MCU | Infineon

MPN: CY8C27443-24PXI ✗ Akhir Hidup
3.0 V to 5.25 V Vdss 28-pin through-hole DIP Package 24 MHz Speed 16 KB (16K x 8 bytes) Memory
MOQ: 1 |

CY8C27443-24PXI Ringkasan

The Infineon CY8C27443-24PXI is an 8-bit PSoC 1 programmable system-on-chip microcontroller with a 24 MHz M8C processor, 16 KB of flash memory, 256 bytes of SRAM, and 24 GPIOs in a 28-pin through-hole DIP package. It operates from 3.0 V to 5.25 V and combines a programmable embedded controller with mixed-signal and digital peripheral resources on one integrated device.

A PSoC, or programmable system-on-chip, combines a microcontroller core, programmable analog and digital blocks, and configurable peripherals in a single integrated circuit. Its hierarchy is microcontroller -> embedded controller -> programmable system-on-chip -> semiconductor. Instead of implementing every analog function with separate components, engineers can configure suitable PSoC blocks for sensing, control, signal conditioning, and general-purpose digital processing.

The CY8C27443 belongs to the CY8C27x43 PSoC 1 family, whose M8C architecture provides an 8-bit processing path operating at up to 24 MHz. The device includes 16 KB, or 16K x 8 bytes, of flash memory for program storage and 256 bytes of SRAM for working data. Its 24 GPIO resources provide connections for digital inputs, outputs, interrupts, and mixed-signal functions, reducing the number of external components in compact embedded systems.

The operating-voltage range of 3.0 V to 5.25 V permits integration with 3.3 V and 5 V system rails. Because PSoC peripherals are programmable, the same silicon can support different control arrangements and interface assignments through device configuration. Firmware development must account for the selected digital blocks, analog routing, interrupt structure, and the device's M8C programming environment rather than treating the MCU as a conventional fixed-peripheral controller.

Typical applications include industrial control panels, keypad interfaces, sensor-conditioning systems, building-control nodes, compact instrumentation, and consumer devices requiring both digital control and programmable analog functions. The 28-pin DIP package is particularly useful for prototypes, through-hole industrial assemblies, and educational platforms where socketed or easy-to-inspect hardware is preferred.

PCB and firmware planning should include the manufacturer's recommended decoupling, programming-header connections, exposed peripheral assignments, and oscillator configuration. Before production release, verify the programmed function assignments and unused pins against the pin-description table in the manufacturer datasheet. The DIP outline also requires adequate clearance for through-hole insertion and soldering tooling.

This page consolidates the PSoC 1 device identity, memory configuration, supply range, package constraints, application guidance, and replacement considerations into an engineering-focused reference. It also distinguishes true same-footprint drop-in options from related package variants that cannot be substituted without PCB changes.

Alternatif penggantian untuk CY8C27443-24PXI — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

CY8C27443-24PXI Rating Maksimal & Karakteristik Listrik

Product Type 8-bit PSoC 1 programmable system-on-chip microcontroller
Processor Core M8C, 8-bit
Maximum CPU Frequency 24 MHz
Flash Memory 16 KB (16K x 8 bytes)
SRAM 256 bytes
General-Purpose I/O 24 GPIO
Tegangan Pemuat Kerja 3.0 V to 5.25 V
Package Type 28-pin through-hole DIP
Total Pin Count 28 pins
PSoC Family PSoC 1 CY8C27x43 series
Tipe Mounting Through-hole
Programmable Peripherals Configurable digital and analog PSoC blocks

CY8C27443-24PXI 28-pin through-hole dip Diamant Konfigurasi Panduan

Konfigurasi pin untuk CY8C27443-24PXI (28-pin through-hole dip pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 28-pin through-hole dip untuk CY8C27443-24PXI

Tidak ada data diatribut pin yang tersedia untuk CY8C27443-24PXI.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

CY8C27443-24PXI cocok untuk 6 aplikasis: Industrial Control Panels, Sensor Conditioning and Acquisition, Keypad and User-Interface Controllers, Building-Control Nodes, Compact Test and Measurement Equipment, Educational and Prototype Platforms.

🏭

Industrial Control Panels

The CY8C27443-24PXI fits compact industrial panels that combine push-button inputs, indicator outputs, sensor conditioning, and embedded sequencing. Its 24 MHz M8C core provides deterministic control processing, while 16 KB of flash stores panel logic and 256 bytes of SRAM supports immediate working data. The 24 GPIOs can be distributed among switches, status indicators, communications links, and programmable analog functions. In a panel design, use the manufacturer pin table and decoupling guidance, then verify that every connected signal remains within the 3.0 V to 5.25 V operating range.

🧩

Sensor Conditioning and Acquisition

The CY8C27443-24PXI is appropriate for compact sensor nodes that convert analog inputs into digital control decisions using programmable PSoC resources. Its 24 GPIO positions can support sensor enables, threshold signals, switches, and status indicators, while the 24 MHz M8C processor performs filtering, scaling, and control sequences. The 16 KB flash capacity is suitable for focused embedded firmware, and 256 bytes of SRAM supports short acquisition and processing loops. Validate the analog operating range, sample requirements, and routing limitations against the exact device documentation before finalizing the sensor interface.

🔧

Keypad and User-Interface Controllers

The CY8C27443-24PXI can implement a dedicated keypad, menu, and status controller in equipment where a larger host processor would be unnecessary. Its 24 GPIOs provide ample connections for scanned keys, navigation inputs, indicator control, and alarm signals, while the 24 MHz M8C core handles debouncing and menu logic. With 16 KB of flash available for firmware and 256 bytes of SRAM for current state, the device supports compact but responsive interfaces. Account for scan timing, startup behavior, and input levels in firmware validation.

🏠

Building-Control Nodes

The CY8C27443-24PXI is suited to distributed building-control nodes that supervise switches, inputs, and local actuators. Its programmable system-on-chip architecture allows digital control and analog functions to share one device, reducing component count in space-constrained nodes. The 3.0 V to 5.25 V range supports common low-voltage building electronics, while the 24 MHz processor executes acquisition, filtering, and state logic. For an installed product, verify operating-temperature requirements, watchdog behavior, communication isolation, and the exact GPIO assignments before releasing the circuit.

📟

Compact Test and Measurement Equipment

The CY8C27443-24PXI can serve as the control core in compact measurement instruments where an operator interface, data acquisition, and calibration logic must operate from one controller. Its programmable analog and digital blocks can support signal conditioning, while the 24 GPIO positions handle range selection, triggers, indicators, and communications. The 16 KB flash and 256 bytes of SRAM are appropriate for focused instruments rather than large data buffers. Confirm ADC or comparator characteristics, measurement accuracy, calibration storage, and interface timing in the manufacturer documentation for the exact configuration.

🧪

Educational and Prototype Platforms

The 28-pin DIP package makes the CY8C27443-24PXI convenient for educational kits, prototype boards, and manually inspected through-hole assemblies. Students can explore PSoC 1 programming, interrupt handling, GPIO control, and configurable peripheral behavior using the 24 MHz M8C core, 16 KB flash, and 256 bytes of SRAM. The 24 GPIOs also provide enough connections for switches, LEDs, sensors, and basic instruments during development. Build the programming interface and decoupling according to the manufacturer guidance, and avoid treating breadboard layouts as final signal-integrity or thermal designs.

Ringkasan Produk Direkomendasikan

CY8C27443-24PVXI Same PSoC 1 core family in a surface-mount package Digunakan di dalam: Industrial Control Panels, Sensor Conditioning and Acquisition, Keypad and User-Interface Controllers, Building-Control Nodes, Compact Test and Measurement Equipment, Educational and Prototype Platforms
What are the key specifications of CY8C27443-24PXI that engineers should know?
The CY8C27443-24PXI is an 8-bit PSoC 1 microcontroller with a 24 MHz M8C core, 16 KB of flash, 256 bytes of SRAM, 24 GPIOs, and a 28-pin DIP package. According to the manufacturer datasheet, its supported supply range is 3.0 V to 5.25 V. These specifications make it suitable for compact embedded-control designs that need programmable analog and digital functions without implementing each peripheral in a separate device.
What is the CY8C27443-24PXI and what does PSoC mean?
The CY8C27443-24PXI is an 8-bit programmable system-on-chip microcontroller in the PSoC 1 CY8C27x43 family. PSoC means programmable system-on-chip and describes the integration of an embedded controller core with configurable digital and analog peripheral blocks. According to the manufacturer datasheet, this device combines a 24 MHz M8C core with 16 KB of flash, 256 bytes of SRAM, and 24 GPIOs on one integrated circuit.
What is the flash and SRAM memory in the CY8C27443-24PXI?
The CY8C27443-24PXI contains 16 KB, or 16K x 8 bytes, of flash memory and 256 bytes of SRAM. According to the manufacturer datasheet, flash stores the executable firmware and fixed data, while SRAM provides working memory for variables, stack operations, and peripheral data. Firmware sizing and RAM allocation should be checked against the final application before programming the device.
Where can I download the CY8C27443 datasheet PDF?
The CY8C27443-24PXI datasheet PDF is accessible through the linked Cypress Semiconductor document on Alldatasheet, while the related CY8C27443-24PVXI technical page is available from Infineon. The manufacturer documentation contains the electrical characteristics, pin descriptions, memory map, interrupt information, and programming guidance. Use the exact ordering-code documentation when confirming package dimensions, temperature grade, and ordering options.
Where can I find the CY8C27443 pinout and package information?
The CY8C27443-24PXI pinout is found in the pin-configuration and package-drawing sections of the manufacturer datasheet. The device is identified as an 8-bit PSoC 1 microcontroller with 28 pins in a through-hole DIP package. Before assigning PCB tracks, use the datasheet pin-description table to identify power, ground, programming, oscillator, GPIO, and analog-function assignments for the exact ordering code.
How do I program a CY8C27443 microcontroller?
A CY8C27443 is programmed through the device's dedicated programming interface using compatible Cypress/Infineon PSoC programming hardware and software. The programming setup must support the M8C PSoC 1 device family and the selected 28-pin DIP device. Consult the manufacturer programming guide and device documentation for the exact clock, voltage, and signal requirements rather than treating the MCU as a generic serial-bootloader target.
Is CY8C27443-24PXI suitable for 3.3 V and 5 V systems?
Yes, the CY8C27443-24PXI supports an operating voltage from 3.0 V to 5.25 V, making it suitable for systems operating at 3.3 V or 5 V. According to the manufacturer datasheet, the internal programmable blocks should be configured for the selected rail, and external signal levels must remain within the device's specified limits. Check timing and output-drive requirements at the chosen supply voltage.
What is the CY8C27443-24PXI used for?
The CY8C27443-24PXI is used for embedded control and mixed-signal system designs that benefit from programmable peripherals. Typical uses include industrial control panels, sensor interfaces, keypad controllers, building-control nodes, and compact instrumentation. Its 24 MHz M8C core, 24 GPIOs, 16 KB flash, and 256 bytes of SRAM support small control tasks while allowing analog and digital functions to be configured in firmware.
What can replace the CY8C27443-24PXI on the same PCB?
A valid replacement must use the same 28-pin DIP footprint, pinout, voltage range, processor performance, and essential memory configuration. No confirmed same-footprint drop-in replacement is identified for the CY8C27443-24PXI. The related CY8C27443-24PVXI uses a 28-SSOP package and therefore requires a PCB redesign. Use the Request a Quote form on this page when sourcing the exact obsolete ordering code or confirming a reviewed replacement.
Is CY8C27443-24PVXI the same as CY8C27443-24PXI?
No, CY8C27443-24PVXI and CY8C27443-24PXI are not direct package-compatible replacements. The CY8C27443-24PVXI is a 28-SSOP device, whereas the CY8C27443-24PXI is a 28-pin through-hole DIP. Although both belong to the PSoC 1 CY8C27x43 family and share core characteristics, their physical footprints differ, so the SSOP version cannot replace the DIP without a PCB change.
When should I choose the CY8C27443-24PXI over a PIC16F877A?
Choose the CY8C27443-24PXI when the design benefits from PSoC 1's configurable digital and analog blocks, a 24 MHz M8C core, and 24 GPIOs. A PIC16F877A may offer a different peripheral architecture and memory organization, but it is not automatically a pin-to-pin substitute. The correct decision depends on the required package, voltage, memory, analog functions, programming ecosystem, and verified pin compatibility rather than general MCU similarity.
Is the CY8C27443-24PXI currently active?
The CY8C27443-24PXI is listed as obsolete and no longer manufactured. For maintenance, repair, or continuation of an existing design, request availability for the exact ordering code through the Request a Quote form on this page. The manufacturer may still provide documentation and related ordering information, but a lifecycle guarantee should not be inferred from a listing that displays a legacy or obsolete status.
Where can I buy the CY8C27443-24PXI and what is its price?
Use the Request a Quote form on this page to request current CY8C27443-24PXI availability, quantity breaks, and a formal quotation. Because this ordering code is obsolete, stock may be limited or dependent on remaining inventory rather than routine production allocation. The form lets you state the required quantity, package, target date, and any traceability requirements directly to the XAIPART team.
What is the lead time for an obsolete CY8C27443-24PXI order?
The lead time for the obsolete CY8C27443-24PXI depends on the quantity of remaining inventory and the fulfillment plan. Submit the required quantity and target schedule through the Request a Quote form on this page for confirmation. The request should identify whether the order is for prototype continuity, scheduled production, or repair stock, since these priorities can require different sourcing and inspection approaches.
Is the CY8C27443-24PXI in stock?
Stock for the obsolete CY8C27443-24PXI should be confirmed through the Request a Quote form on this page. The part is not listed as an actively manufactured product, so available inventory can change independently of standard factory lead times. Request a written availability confirmation for the exact MPN, quantity, package condition, and intended delivery date before committing a repair or production schedule.

Data referensi engineering untuk CY8C27443-24PXI — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the CY8C27443-24PXI when maintaining an existing 28-pin DIP design that requires the PSoC 1 M8C core, 24 MHz operation, 16 KB flash, 256 bytes of SRAM, 24 GPIOs, and a 3.0 V to 5.25 V supply. Its through-hole package is useful for prototypes, educational platforms, repair assemblies, and through-hole industrial products. Do not select the CY8C27443-24PVXI as a drop-in substitute because its 28-SSOP footprint requires PCB changes. A PIC16F877A should be considered only when its memory, voltage, peripheral, programming, and pin configuration are independently verified rather than inferred from the shared 8-bit MCU category. Because the target is obsolete, exact MPN continuity and component traceability should take priority over an approximate replacement. A second-source redesign is warranted when long-term availability matters more than preserving the original board.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini
Manufacturer Infineon Technologies / Cypress Semiconductor
Package 28-pin through-hole DIP
Product Type 8-bit PSoC 1 microcontroller
Processor Core M8C, 8-bit
Maximum CPU Frequency 24 MHz
Flash Memory 16 KB (16K x 8 bytes)
SRAM 256 bytes
General-Purpose I/O 24 GPIO
Operating Supply Voltage 3.0 V to 5.25 V
Lifecycle Status Obsolete

Diferensiator Kunci

  • Combines an embedded controller with programmable PSoC resources (vsPIC16F877A)
  • Through-hole package supports inspection and prototype assembly (vsCY8C27443-24PVXI)
  • Dedicated GPIO capacity for compact embedded-control boards (vsCY8C27443-24PVXI)

Catatan Desain

Plan the PCB around the 28-pin through-hole DIP footprint, including adequate board-edge clearance for insertion and soldering access. Place required decoupling capacitors close to the supply and ground pins using the manufacturer layout example. The DIP format simplifies prototype inspection, but it occupies more board area than the related 28-SSOP CY8C27443-24PVXI and cannot share the same footprint.

Design the supply path for the manufacturer's 3.0 V to 5.25 V operating range and validate all external signal levels against the selected rail. Provide local bypass capacitance and keep the programming interface from introducing ground bounce or supply transients. If the board uses mixed 3.3 V and 5 V peripherals, include appropriate level translation rather than assuming the DIP and SSOP ordering codes have identical external interfaces.

Assign pins from the manufacturer pin-description table before routing, especially for power, ground, programming, reset, oscillator, and mixed-signal functions. Avoid assigning peripheral functions solely by pin number because PSoC routing and package alternatives can alter the available signal arrangement. Leave required programming-test pads accessible and keep sensitive analog routes away from high-current switching paths where practical.

Do not treat CY8C27443-24PVXI as a direct replacement for the DIP version; its package is 28-SSOP and requires a different PCB footprint. Also do not assume a generic 8-bit MCU is a drop-in substitute because memory size, peripheral mapping, voltage levels, and programming requirements may differ. Validate the exact ordering code against the schematic and datasheet before procurement or PCB release.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The target is a general-purpose PSoC 1 microcontroller. No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement is included in the manufacturer and distributor records cited on this page.

Data disahkan pada: 2026-11-10 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

cy8c27443 datasheet cy8c27443 programmer cy8c27443 datasheet pdf CY8C27443-24PXI datasheet CY8C27443-24PXI pinout CY8C27443-24PXI specifications CY8C27443-24PXI equivalent CY8C27443-24PXI replacement CY8C27443-24PXI footprint CY8C27443-24PXI price Infineon CY8C27443-24PXI CY8C27443 24MHz 16KB flash MCU

Komponen dan Istilah Terkait

Infineon Technologies Cypress Semiconductor CY8C27443-24PXI CY8C27443 PSoC 1 M8C 8-bit microcontroller programmable system-on-chip embedded controller semiconductor 24 MHz 16 KB flash memory 256 bytes SRAM 24 GPIO 28-pin DIP through-hole package 3.0 V to 5.25 V industrial control sensor conditioning building control mixed-signal system CY8C27443-24PVXI PIC16F877A RoHS REACH
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ