CY8C4013SXI-410 - 16MHz Cortex-M0 PSoC 4 MCU | Infineon
MPN: CY8C4013SXI-410 ✓ AktifCY8C4013SXI-410 Ringkasan
A programmable system-on-chip is a microcontroller that integrates a processor core with configurable analog and digital peripheral blocks. Within the device hierarchy, the CY8C4013SXI-410 belongs to the PSoC 4 family, combines an Arm Cortex-M0 microcontroller with programmable resources, and provides a compact platform for embedded control, sensor conditioning, and low-speed communication. The PSoC architecture can reduce the need for separate analog and digital companion components.
Key device resources include 8 KB of flash for program storage, 2 KB of SRAM for working memory, and 16 MHz maximum processing speed. I2C connectivity supports communication with sensors, EEPROMs, and other low-speed peripherals, while timer and PWM resources support periodic control tasks, dimming, and simple motor or actuator control. The specified industrial temperature range is -40°C to 85°C.
The Arm Cortex-M0 architecture provides a deterministic, low-complexity execution environment with an efficient instruction set and broad embedded-tool support. Its 32-bit processing capability and compact memory organization are suited to cost-sensitive control nodes that collect data, manage a peripheral bus, and execute application firmware without requiring a separate digital signal processor or higher-performance application processor.
Typical uses include distributed industrial sensing, compact environmental monitors, battery-powered sensor nodes, LED control modules, small appliance controllers, and service-port equipment. An I2C interface is particularly useful in designs where a microcontroller must monitor an external sensor and transfer readings to a higher-level controller. The compact SOIC package also supports through-hole assembly where surface-mount density is not required.
When laying out the board, follow the manufacturer pin-description table for analog supply, ground, and general-purpose signal assignments. Keep analog and digital ground connections consistent with the recommended reference layout, and use the documented decoupling structure so the 1.71 V to 5.5 V supply range remains stable under transient loading.
This page consolidates the device specifications, package details, sourcing information, replacement constraints, and practical design guidance for engineers evaluating the CY8C4013SXI-410 in compact embedded control designs.
Alternatif penggantian untuk CY8C4013SXI-410 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
CY8C4013SXI-410T
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
CY8C4013SXI-410 Rating Maksimal & Karakteristik Listrik
| Product Type | 32-bit Microcontroller |
| Product Series | PSoC 4000 |
| Processor Core | Arm Cortex-M0 |
| Maximum CPU Frequency | 16 MHz |
| Flash Memory | 8 KB |
| SRAM | 2 KB |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Industrial Supply Options | 2.5 V, 3.3 V, and 5 V |
| Rentang Suhu Kerja | -40°C to +85°C |
| Paket | 8-pin SOIC |
| Tipe Mounting | Surface Mount |
| Architecture | 32-bit |
| Serial Interface | I2C |
| Timer and PWM Support | Yes |
| Programmable System-on-Chip | Yes |
Konfigurasi Pin CY8C4013SXI-410
| Pin produk 1 | P0[0] — General-purpose port pin |
| Pin produk 2 | P0[2] — General-purpose port pin |
| Pin produk 3 | P1[0] — General-purpose port pin |
| Pin produk 4 | P1[2] — General-purpose port pin |
| Pin produk 5 | P1[4] — General-purpose port pin |
| Pin produk 6 | P1[6] — General-purpose port pin |
| Pin produk 7 | VDDA — Analog supply voltage |
| Pin produk 8 | VSSA — Analog ground connection |
Aplikasi Umum
CY8C4013SXI-410 cocok untuk 6 aplikasis: Industrial Sensor Nodes, Battery-Powered Monitoring Devices, I2C Control Hubs, LED Lighting Control Modules, Compact Appliance Controllers, Service Port and HMI Accessories.
Industrial Sensor Nodes
The CY8C4013SXI-410 fits distributed industrial sensing nodes that periodically read a sensor and publish measurements over a low-speed bus. Its Arm Cortex-M0 core operates up to 16 MHz, while 8 KB of flash holds the acquisition, filtering, and communication routines. The I2C interface can connect to compatible sensors or memory devices, and timer resources can schedule sampling without blocking the main loop. The 1.71 V to 5.5 V range accommodates regulated 3.3 V field electronics, while the -40°C to 85°C specification supports industrial environments.
Direkomendasikan
Battery-Powered Monitoring Devices
The CY8C4013SXI-410 is useful in compact battery-powered monitors where a low-voltage supply and modest processing demand favor a simple 8-pin controller. Its 1.71 V minimum operating voltage supports low-energy system rails, and the 16 MHz Cortex-M0 core provides enough performance for duty-cycled acquisition and threshold processing. The 2 KB SRAM can hold working buffers, while 8 KB of flash accommodates compact firmware. Low-power design still requires checking the selected sleep modes, peripheral clock requirements, and sensor standby current in the device documentation.
Direkomendasikan
I2C Control Hubs
The CY8C4013SXI-410 can serve as a small I2C control hub for sensors, EEPROMs, and low-speed peripherals. Its I2C interface reduces the pin count compared with parallel implementations, and the available timer and PWM blocks support auxiliary functions such as periodic alerts or actuator control. The Cortex-M0 core runs at up to 16 MHz, allowing firmware to validate incoming data and maintain a consistent device state. Firmware designers should confirm address handling, bus-speed timing, pull-up requirements, and peripheral address conflicts against the selected device data.
Direkomendasikan
LED Lighting Control Modules
The CY8C4013SXI-410 can control compact LED dimming, status indication, or simple signage modules. Its timer and PWM resources support periodic waveform generation, while the 16 MHz Cortex-M0 core handles user commands, button input, and state-machine logic. The 8 KB flash capacity is appropriate for compact lighting firmware, and the 8-pin SOIC package keeps the controller footprint small. Design the LED drive stage separately, account for driver current outside the microcontroller, and use the documented GPIO limits for exposed indicator outputs.
Direkomendasikan
Compact Appliance Controllers
The CY8C4013SXI-410 is appropriate for small appliance and equipment controllers that require a modest state machine, a few I2C-connected peripherals, and simple timers rather than a high-performance processor. The 16 MHz Cortex-M0 core executes control logic efficiently, and 8 KB of flash plus 2 KB of SRAM fit tightly scoped embedded applications. Its 1.71 V to 5.5 V range provides flexibility across internal rails, while the SOIC package supports accessible assembly and servicing. Confirm relay, motor, and heater interfaces are driven by appropriate external circuitry.
Direkomendasikan
Service Port and HMI Accessories
The CY8C4013SXI-410 can support small human-machine interface accessories, configuration tools, or service-port modules that read controls and communicate over I2C. Its 16 MHz Cortex-M0 performance is sufficient for responsive button handling, display updates, and protocol tasks, while the 8 KB flash limit favors a focused firmware architecture. The compact 8-pin SOIC package allows the controller to fit behind a connector or keypad assembly. Check available GPIO, timing requirements, and firmware size early because the limited memory restricts feature growth.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk CY8C4013SXI-410 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | CY8C4013SXI-410T |
|---|---|---|
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Package | 8-pin SOIC | 8-pin SOIC - same |
| Processor Core | Arm Cortex-M0 | Arm Cortex-M0 - same |
| Maximum CPU Frequency | 16 MHz | 16 MHz - same |
| Flash Memory | 8 KB | 8 KB - same |
| SRAM | 2 KB | 2 KB - same |
| Operating Voltage Range | 1.71 V to 5.5 V | 1.71 V to 5.5 V - same |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C - same |
| Serial Connectivity | I2C | I2C - same |
| Timer and PWM Support | Yes | Yes - same |
| Ordering Format | Tube | Tape and reel |
Diferensiator Kunci
- Direct same-package ordering option with identical electrical ratings (vsCY8C4013SXI-410T)
- Compact PSoC integration in an 8-pin SOIC (vsCY8C4013SXI-410T)
- Low-voltage operation for compact embedded systems (vsCY8C4013SXI-410T)
Catatan Desain
Keep the operating rail within the device's 1.71 V to 5.5 V range and account for transient excursions at the supply pins. Place the recommended input and bulk-decoupling capacitors close to their corresponding pins, with a short return path to the device ground. If the board combines 3.3 V and 5 V domains, confirm the level of every attached peripheral before enabling communication.
Use the manufacturer package drawing for the 8-pin SOIC land pattern and verify pin 1 orientation against the PCB silkscreen. Because several pins are multiplexed through the programmable digital and analog blocks, confirm the final pin function after configuration is assigned. Maintain the recommended analog and digital layout separation when the selected design uses analog resources.
Do not treat a same-package MCU as an automatic substitute. For the CY8C4013SXI-410, firmware size is constrained by 8 KB of flash and 2 KB of SRAM, while peripheral availability and signal multiplexing depend on the PSoC configuration. Before replacement, compare the clock limit, supply range, I2C pins, timer assignments, package dimensions, and any application-specific programming dependencies.
Informasi Konformitas
Compliance attributes were not identified in the manufacturer product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with Infineon for the exact ordering code before regulatory submission.