CY8C4014SXI-421 - 16MHz 16KB Flash PSoC 4 | Infineon
MPN: CY8C4014SXI-421 ✓ AktifCY8C4014SXI-421 Ringkasan
A PSoC, or programmable system-on-chip, is a mixed-signal microcontroller architecture that extends beyond a conventional fixed-function MCU. Its programmable analog and digital blocks, peripheral routing, and configurable signal paths provide flexibility for applications that require capacitive sensing, signal conditioning, timers, counters, PWM generation, or general-purpose embedded control. The CY8C4000 family is positioned as the smallest member of the PSoC 4 platform and combines an Arm Cortex-M0 CPU with configurable peripherals.
The CY8C4014SXI-421 includes 16 kByte of flash for program storage and 2 kByte of SRAM for working memory. Its processing core supports operation up to 16 MHz, while its configurable peripheral architecture includes programmable GPIO, timers, counters, and PWM functions. CAPSENSE provides a dedicated route for implementing capacitive touch or proximity interfaces, and the device can support up to 20 programmable GPIO pins across its broader family configurations, subject to the selected package and pin availability.
As a 32-bit Arm Cortex-M0 device, the microcontroller combines a compact processor core with a peripheral system designed for embedded control. Firmware can assign digital functions such as timers, counters, serial interfaces, and GPIO to available routing resources, while analog blocks can be configured for measurement and signal conditioning. This architecture is useful when a fixed MCU pin map would otherwise require additional glue logic or multiple devices.
Typical uses for the CY8C4014SXI-421 include capacitive touch controls, compact industrial sensing modules, consumer appliance interfaces, capacitive proximity products, battery-powered equipment, and embedded control boards requiring a small pin count. The 16-SOIC package supports conventional surface-mount assembly and can simplify prototypes that otherwise require a smaller QFN or WLCSP footprint.
For PCB implementation, use the manufacturer pin-description table when assigning tracks because the complete pin map is not reproduced on this page. Confirm the device's operating voltage, exposed-pin requirements, programming interface, and decoupling recommendations against the manufacturer datasheet before releasing a layout. Firmware migration between PSoC 4000 variants should also account for differences in available programmable blocks and memory size.
This page combines manufacturer specifications, drop-in replacement guidance, application fit, and implementation considerations in a form that helps engineers evaluate the CY8C4014SXI-421 before schematic capture and PCB release. It also identifies where package, memory, qualification, or lifecycle details require direct confirmation with the manufacturer.
Alternatif penggantian untuk CY8C4014SXI-421 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian CY8C4014SXI-421 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Product Type, SRAM, Flash Memory, Maximum CPU Frequency.
CY8C4014SXI-420T
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
CY8C4013SXI-421
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
CY8C4012SXI-421
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
CY8C4011SXI-421
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
CY8C4014SXA-421T
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
CY8C4014SXI-421 Rating Maksimal & Karakteristik Listrik
| Product Type | PSoC 4 programmable system-on-chip microcontroller |
| CPU Core | 32-bit Arm Cortex-M0 |
| Maximum CPU Frequency | 16 MHz |
| Program Memory | 16 kByte flash |
| Program Memory Organization | 16K x 8 bits |
| SRAM | 2 kByte |
| Rentang Suhu Kerja | -40°C to +85°C |
| Paket | 16-SOIC |
| Tipe Mounting | Surface mount |
| Programmable GPIO | Up to 20 pins across supported family package configurations |
| Peripheral Architecture | Programmable and reconfigurable analog and digital blocks with flexible automatic routing |
| Timer and Counter Support | 16-bit configurable timer, counter, and PWM block |
| Capacitive Sensing | CAPSENSE supported |
| Tegangan Pemuat | 2.5 V to 5 V |
| Datasheet Length | 34 pages |
CY8C4014SXI-421 16-soic Diamant Konfigurasi Panduan
Konfigurasi pin untuk CY8C4014SXI-421 (16-soic pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk CY8C4014SXI-421.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
CY8C4014SXI-421 cocok untuk 6 aplikasis: Capacitive Touch Control Panels, Industrial Condition Monitoring, Battery-Powered Sensor Nodes, Consumer Appliance Interfaces, LED and Lighting Control, Embedded Control and HMI Modules.
Capacitive Touch Control Panels
The CY8C4014SXI-421 fits compact capacitive touch controls because it combines CAPSENSE with a 32-bit Arm Cortex-M0 processor operating up to 16 MHz. Firmware can implement buttons, sliders, proximity detection, debouncing, and application logic while the configurable digital and analog blocks reduce the need for separate input-processing components. The 16-SOIC package is also easier to prototype and inspect than the smallest PSoC packages. Final performance depends on sensor geometry, PCB guard structures, scan timing, calibration, and the selected peripheral configuration, so sensor validation should be performed on the production-layout board.
Direkomendasikan
Industrial Condition Monitoring
The CY8C4014SXI-421 can serve as the control and signal-conditioning hub in a compact condition-monitoring module. Its 16 MHz Arm Cortex-M0 core can supervise sensors, process measurements, apply control logic, and manage communications, while programmable analog and digital blocks allow signal paths to be adapted to the selected board design. The specified -40°C to +85°C range suits many industrial environments where consumer-grade components are unsuitable. Designers should budget processing time for filtering and diagnostics, verify analog limits against the manufacturer datasheet, and isolate sensitive sensor paths from switching noise on the PCB.
Direkomendasikan
Battery-Powered Sensor Nodes
A CY8C4014SXI-421-based sensor node can combine acquisition, local control, and low-power behavior in one 16-SOIC device. The 32-bit Cortex-M0 core executes measurement and decision logic, while programmable peripherals route signals to timers, counters, GPIO, and communications functions without requiring a fixed pin map. Its 2 kByte of SRAM can support compact data processing, while 16 kByte of flash stores application firmware. Low-power suitability depends on the selected PSoC configuration, active peripherals, sleep behavior, and firmware. Battery life should therefore be measured with the final radio, sensor, and regulator rather than estimated from CPU frequency alone.
Direkomendasikan
Consumer Appliance Interfaces
The CY8C4014SXI-421 is appropriate for appliance user interfaces that combine capacitive controls with embedded logic. CAPSENSE can support touch keys or proximity elements, while the Cortex-M0 processor manages button interpretation, LEDs, operating modes, safety interlocks, and communications. The 16-SOIC package supports conventional surface-mount assembly and offers more inspection accessibility than compact QFN or WLCSP options. The designer should define the touch performance target before fixing sensor geometry, account for humidity and nearby metal, and validate button response in the final enclosure because mechanical construction can materially affect capacitive measurements.
Direkomendasikan
LED and Lighting Control
The programmable peripherals of the CY8C4014SXI-421 can support compact LED-lighting controllers where timers, counters, PWM, GPIO, and configurable routing are needed in a small design. The 32-bit processor can manage lighting sequences, user inputs, fault handling, and communication, while CAPSENSE can add touch or proximity control without a separate sensing controller. The 16-SOIC package provides a practical assembly choice for moderate production volumes. Timing accuracy and dimming smoothness depend on the configured clock and PWM resources, so firmware and hardware should be evaluated together. Decoupling and power-supply layout must also prevent LED-driver switching from disturbing sensitive control signals.
Direkomendasikan
Embedded Control and HMI Modules
The CY8C4014SXI-421 can form the core of a compact embedded control module combining local HMI, sensing, timers, and machine-state monitoring. Programmable routing allows designers to adapt digital peripheral assignments to the board, reducing external logic when resources can be shared. Its 16 kByte of flash and 2 kByte of SRAM suit focused applications with modest code and data requirements, while the 16 MHz Cortex-M0 core provides 32-bit processing for control algorithms. For a production design, verify the maximum peripheral count in the selected 16-SOIC configuration, confirm programming and debug access, and reserve test points for production firmware validation and boundary scanning.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk CY8C4014SXI-421 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | CY8C4014SXI-420T | CY8C4013SXI-421 | CY8C4012SXI-421 | CY8C4011SXI-421 | CY8C4014SXA-421T |
|---|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Product Family | PSoC 4000 / CY8C4014 | PSoC 4000 / CY8C4014 | PSoC 4000 / CY8C4013 | PSoC 4000 / CY8C4012 | PSoC 4000 / CY8C4011 | PSoC 4000 / CY8C4014 |
| CPU Core | 32-bit Arm Cortex-M0 | 32-bit Arm Cortex-M0 | 32-bit Arm Cortex-M0 | 32-bit Arm Cortex-M0 | 32-bit Arm Cortex-M0 | 32-bit Arm Cortex-M0 |
| Maximum CPU Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
Diferensiator Kunci
- Higher confirmed memory capacity than lower CY8C401x alternatives (vsCY8C4012SXI-421)
- Exact 421 ordering configuration (vsCY8C4014SXI-420T)
- Programmable mixed-signal architecture (vsCY8C4013SXI-421)
Catatan Desain
Use the manufacturer pin-description table to assign all 16 physical pins before schematic release. Place the device so pin 1 orientation matches the package marking, preserve access to programming and debug signals, and verify that every supply and ground connection follows the datasheet recommendation. Decoupling capacitors should be positioned close to their associated pins with short return paths, while CAPSENSE traces should be routed away from noisy switching nodes and protected from accidental copper contamination.
Treat CAPSENSE electrodes as high-impedance analog nodes. Keep their routed area compact, use the recommended ground guard or shielding where applicable, and avoid placing traces beneath or immediately beside switching-power paths. Validate electrode geometry in the final enclosure because housing material, nearby metal, humidity, and cable routing can change sensor performance. Use production-layout coupons or equivalent prototypes when touch accuracy and repeatability are critical.
Do not assume that any CY8C4014 ordering suffix is interchangeable without checking the manufacturer ordering table. Confirm the 16-SOIC package, flash capacity, SRAM capacity, temperature range, qualification, and production status for the exact part used in the BOM. Firmware should also be checked for peripheral-instance changes and configuration differences when moving between CY8C401x family members, even if the PCB footprint remains unchanged.
Validate the complete power-supply design across the device's operating voltage range and maximum active load. Separate sensitive analog and CAPSENSE routing from switching or high-current digital paths, and verify regulator settling time at startup. The processor can operate up to 16 MHz, but actual power consumption depends on clock settings, active peripherals, analog blocks, and firmware, so board-level measurement is preferable to using CPU frequency alone as a thermal indicator.
Informasi Konformitas
The available manufacturer product and ordering information confirms the device characteristics but does not reproduce current RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Obtain the current compliance documentation for the exact ordering code from the manufacturer.